Skip to main content
SpringerLink
Log in

A predictive hybrid force modeling in turning: application to stainless steel dry machining with a coated groove tool

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

This paper presents an hybrid numerical/analytical modeling for estimation of cutting forces in machining process. The approach dedicated to predict 3D cutting forces are based on a chip flow direction modeling coupled with plane strain numerical simulations. An equivalent uncut chip thickness, deduced from the chip flow direction, is used as an input parameter in the 2D FEM. Resulting 2D numerical cutting forces are thus obtained from FEM, and knowing the chip flow direction, tangential, radial, and feed forces are calculated. Cutting forces derived from the proposed approach are compared to experiments when machining 304L austenitic steel with a groove-coated tool under dry condition. To take into account the complex groove geometry, the real shape of the cutting tool used in experiments has been captured by means of a digitization procedure, and thus implemented in 2D plane strain numerical simulations. The approach is applied to the case of stainless steel turning over a great range of cutting conditions. Two chip flow direction modelings are considered for the cutting force decomposition where it is shown the good predictive capabilities of the proposed approach.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Merchant ME (1944) Basic mechanics of the metal cutting process. J App Mech 11:A168–A175

  2. Yang K, Liang Y-C, Zheng K-N, Bai Q-S, ChenW-Q (2011) Tool edge radius effect on cutting temperature in micro-end-milling process. Int J Adv Manuf Technol 52:905–912

  3. Adetoro OB, Wen PH (2010) Prediction of mechanistic cutting force coefficients using ALE formulation. Int J Adv Manufact Technol 46:79–90

  4. Stabler GV (1951) The fundamental geometry of cutting tools. Proc Inst Mech Eng 165:14–21

  5. Stabler GV (1964) The chip flow law and its consequences. In: 5th international machine tool design research conference, Birmingham, UK, pp 243–251

  6. Russell JK, Brown RH (1966) The measurement of the chip flow direction. Int J Mach Tool Des Res 6:129–138

    Article  Google Scholar 

  7. Colwell LV (1954) Predicting the angle of chip flow for single-point cutting tools. Trans ASME 76:199–204

    Google Scholar 

  8. Wang J, Mathew P (1995) Development of a general tool model for turning operations based on a variable flow stress theory. Int J Mach Tools Manufact 35(1):71–90

    Article  Google Scholar 

  9. Wang J (2001) Development of a chip flow model for turning operations. Int J Mach Tools Manufact 41:1265–1274

    Article  Google Scholar 

  10. Jawahir IS, Wang X (2007) Development of hybrid predictive models and optimization techniques for machining operations. J Mater Process Technol 185:46–59

    Article  Google Scholar 

  11. Jawahir IS, Ghosh R, Balaji AJ, Li PX (2000) Predictability of tool failure modes in turning with complex grooved tools using the equivalent toolface (ET) model. Wear 244:94–103

  12. Fang N, Wu Q (2009) A comparative study of the cutting forces in high speed machining of Ti-6Al-4V and Inconel 718 with a round cutting edge tool. J Mater Process Technol 209:4385–4389

  13. Koné F, Czarnota C, Haddag B, Nouari M (2013) Modeling of velocity-dependent chip flow angle and experimental analysis when machining 304l austenitic stainless steel with groove coated-carbide tools. J Mater Process Technol 213:1166–1178

    Article  Google Scholar 

  14. Deshayes L (2007) Analysis of an equivalent tool face for the cutting speed range prediction of complex grooved tools. J Mater Process Technol 190:251–262

    Article  Google Scholar 

  15. Pereira RBD, Braga DU, Nevez FO, da Silva ASC (2013) Analysis of surface roughness and cutting force when turning AISI 1045 steel with grooved tools through Scott-Knott method. Int J Adv Manufact Technol 69:1431–1441

    Article  Google Scholar 

  16. Yen YC, Söhner J, Lilly B, Altan T (2004) Estimation of tool wear in orthogonal cutting using the finite element analysis. J Mater Process Technol 146:82–91

    Article  Google Scholar 

  17. Koné F, Czarnota C, Haddag B, Nouari M (2011) Finite element modeling of the thermomechanical behavior of coatings under extreme contact loading in dry machining. Surf Coat Technol 205:3559–3566

    Article  Google Scholar 

  18. Soo SL, Dewes RC, Aspinwall DK (2010) 3D FE modelling of high-speed ball nose end milling. Int J Adv Manufact Technol 50:871–882

    Article  Google Scholar 

  19. Özel T (2009) Computational modelling of 3D turning: Influence of edge micro-geometry on forces, stresses, friction and tool wear in PcBN tooling. J Mater Process Technol 209:5167–5177

  20. Li B, Wang X, Hu Y, Li C (2011) Analytical prediction of cutting forces in orthogonal cutting using unequal division shear-zone model. Int J Adv Manufact Technol 54:431–443

    Article  MathSciNet  Google Scholar 

  21. Sun Y, Sun J, Li J, Li W, Feng B (2013) Modeling of cutting force under the tool flank wear effect in end milling Ti-6Al-4V with solid carbide tool. Int J Adv Manufact Technol 69:2545–2553

  22. Akca D, Remondino F, Nov´ak D, Hanusch T, Schrotter G, Gruen A (2007) Performance evaluation of a coded structured light system for cultural heritage applications. In: Videometrics IX, pp 29–30

  23. Salvi J, Pagès J, Batlle J (2007) Pattern codification strategies in structured light systems. Pattern Recogn 37:827–849

    Article  Google Scholar 

  24. Corporation Scientific Technologies (2008) DEFORM 2D, V9.1 User’s manual. Columbus, OH

  25. Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th international symposium on ballistics, The Hague, NL, pp 541–547

  26. Afazov SM, Ratchev SM, Segal J (2010) Modelling and simulation of micro-milling cutting forces. J Mater Process Technol 210:2154–2162

    Article  Google Scholar 

  27. Seethaler RJ, Yellowley I (1997) An upper-bound cutting model for oblique cutting tools with a nose radius. Int J Mach Tools Manufact 37:119–134

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Université de Lorraine Laboratoire d’Étude des Microstructures et de Mécanique des Matériaux LEM 3 - UMR CNRS 7239, Ile du Saulcy, 57045, Metz–Cedex 01, France

    Christophe Czarnota

  2. Université de Cocody / Institut Pédagogique National de l’Enseignement Technique et Professionnel IPNETP, 08 BP 2098, Abidjan 08, Côte d’Ivoire

    Fousseny Koné

  3. Université de Lorraine Laboratoire d’Énergétique et de Mécanique Théorique et Appliquée LEMTA - UMR CNRS 7563 GIP-InSIC, 27 rue d’Hellieule, 88100, Saint-Dié-des-Vosges, France

    Badis Haddag & Mohammed Nouari

Authors
  1. Christophe Czarnota
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fousseny Koné
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Badis Haddag
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Mohammed Nouari
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Christophe Czarnota.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Czarnota, C., Koné, F., Haddag, B. et al. A predictive hybrid force modeling in turning: application to stainless steel dry machining with a coated groove tool. Int J Adv Manuf Technol 79, 65–79 (2015). https://doi.org/10.1007/s00170-015-6801-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-6801-3

Keywords

Search

Navigation