Abstract
With an increasing application of clinching in different industrial fields, the demand for knowledge of static and dynamic characteristics of clinching is increased. In the present work, the extensible die clinching process was numerically investigated using finite element method. To validate the computational simulation of the extensible die clinching process, experimental tests on extensible die clinched specimens have been carried out. Good agreement is achieved between the predictions and the experimental results. Monotonic tensile tests were carried out to measure the ultimate tensile strengths of the extensible die clinching joints and clinching-bonded hybrid joints. Deformation and failure of the extensible die clinched joints under monotonic tensile loading were studied. The normal hypothesis tests were performed to examine the rationality of the test data. This work was also aimed at evaluating experimentally and comparing the strength and energy absorption of the extensible die clinched joints and clinching-bonded hybrid joints.
Similar content being viewed by others
References
He X, Gu F, Ball A (2014) A review of numerical analysis of friction stir welding. Prog Mater Sci 65:1–66
Mucha J (2013) The effect of material properties and joining process parameters on behavior of self-pierce riveting joints made with the solid rivet. Mater Des 52:932–946
Mucha J (2014) The numerical analysis of the effect of the joining process parameters on self-piercing riveting using the solid rivet. Archive Civil Mech Eng
He X, Gu F, Ball A (2012) Recent development in finite element analysis of self-piercing riveted joints. Int J Adv Manuf Technol 58:643–649
He X, Xing B, Zeng K, Gu F, Ball A (2013) Numerical and experimental investigations of self-piercing riveting. Int J Adv Manuf Technol 69:715–721
Mucha J, Kascak L, Spisak E (2013) The experimental analysis of forming and strength of clinch riveting sheet metal joint made of different materials. Adv Mech Eng, Article ID 848973
Mucha J, Witkowski W (2013) The experimental analysis of the double joint type change effect on the joint destruction process in uniaxial shearing test. Thin-Walled Struct 66:39–49
Neugebauer R, Jesche F, Israel M (2010) Enlargement of the application range of solid punch riveting by two-piece dies. Int J Mater Form 3:999–1002
He X (2010) Recent development in finite element analysis of clinched joints. Int J Adv Manuf Technol 48:607–612
Mucha J, Witkowski W (2014) The clinching joints strength analysis in the aspects of changes in the forming technology and load conditions. Thin-Walled Struct 82:55–66
Lee C, Kim J, Lee S, Ko D, Kim B (2010) Design of mechanical clinching tools for joining of aluminium alloy sheets. Mater Des 31(4):1854–1861
He X, Zhao L, Yang H, Xing B, Wang Y, Deng C, Gu F, Ball A (2014) Investigations of strength and energy absorption of clinched joints. Comput Mater Sci
Gao S, Budde L (1994) Mechanism of mechanical press joining. Int J Mach Tools Manuf 34(5):641–657
Mucha J (2011) The analysis of lock forming mechanism in the clinching joint. Mater Des 32(10):4943–4954
Markowski T, Mucha J, Witkowski W (2013) FEM analysis of clinching joint machine’s C-frame rigidity. Eksploatacja Niezawodnosc-Maint Reliab 1:51–57
Varis JP (2003) The suitability of clinching as a joining method for high-strength structural steel. J Mater Process Technol 132(1–3):242–249
Varis JP (2006) Economics of clinching joint compared to riveted joint and example of applying calculations to a volume product. J Mater Process Technol 172(1):130–138
Neugebauer R, Todtermuschke M, Mauermann R, Riedel F (2008) Overview on the state of development and the application potential of dieless mechanical joining processes. Archive Civil Mech Eng 8(4):51–60
Zheng J, He X, Xu J, Zeng K, Ding Y, Hu Y (2012) Finite element analysis of energy saving jointing method base on energy materials: clinching. Adv Mater Res 577:9–12
Lambiase F, Di Ilio A (2013) Finite element analysis of material flow in mechanical clinching with extensible dies. J Mater Eng Perform 22(6):1629–1636
Lambiase F (2012) Influence of process parameters in mechanical clinching with extensible dies. Int J Adv Manuf Technol 66:2123–2131
He X (2011) A review of finite element analysis of adhesively bonded joints. Int J Adhes Adhes 31:248–264
Bartczak B, Mucha J, Trzepiecinski T (2013) Stress distribution in adhesively-bonded joints and the loading capacity of hybrid joints of car body steels for the automotive industry. Int J Adhes Adhes 45:42–52
He X (2012) Numerical and experimental investigations of the dynamic response of bonded beams with a single-lap joint. Int J Adhes Adhes 37:79–85
He X, Ichikawa M (1993) Effect of thickness control of adhesive layer on strength of adhesive joints. In: Proceedings of the 70th JSME Spring Annual Meeting, Tokyo, Japan, 166-168, (in Japanese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
He, X., Liu, F., Xing, B. et al. Numerical and experimental investigations of extensible die clinching. Int J Adv Manuf Technol 74, 1229–1236 (2014). https://doi.org/10.1007/s00170-014-6078-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6078-y