Abstract
Functional data analysis (FDA) is a statistical method applicable in various areas of human activities. This method allows the prediction of different process parameters based on input data that are continuously recorded during the manufacturing. The present study shows how exit section temperature in the direct extrusion of aluminum sections can be predicted enabling ram speed adjustment to obtain isothermal extrusion. A new linear regression mathematical model has been proposed for the prediction of extrudate temperature. The mathematical model has been developed using technological extrusion parameters that were measured and recorded on the real extrusion press. Simulation of the mathematical model shows that its predictions are in good accordance with the measured data on the extrusion press. In order to obtain isothermal extrusion, adequate ram speed curve was calculated from the proposed mathematical model.
Similar content being viewed by others
References
Pandit M, Hengen H, Romano M (2007) Trends in the automation of aluminium extruder plants. Proceeding of 6th world congress Aluminium 2000, 13–17 May, Florence, Italy
Pandit M, Deis W, Heger T, Hengen H (2004) Automation system for production optimization in aluminum extruder plants based on temperature measurement and control. Proceedings of 8th International Aluminum Extrusion Technology Seminar, 18–21 May, Orlando Florida, Vol. 1, pp 371–380
Pandit M, Heger T, Hengen H (2008) Comprehensive extrusion automation for Iso-thermal and Iso-speed extrusion with a guaranteed cooling rate. Proceedings of 9th International Aluminum Extrusion Technology Seminar, 13–16 May, Orlando Florida, Vol. 1, pp 53–64
Shtarker B, Hodos E, Yoely O (2004) Real temperature parameters for isothermal extrusion. Proceedings of 8th International Aluminum Extrusion Technology Seminar, 18–21 May, Orlando Florida, Vol. 1, pp 225–230
Sheppard T (1999) Extrusion of aluminium alloys. Kluwer Academic Publishers, Dordrecth
Takahashi M, Yoneyama T (2004) Isothermal extrusion of aluminum alloys. Proceedings of 8th International Aluminum Extrusion Technology Seminar, 18–21 May, Orlando Florida, Vol. 1, pp 1–10
Yoneyama T, Takahashi M (2004) Measurement of pressure and friction on the container surface during aluminum hot extrusion. Proceedings of 8th International Aluminum Extrusion Technology Seminar, 18–21 May, Orlando Florida, Vol. 1, pp 39–46
Barron B (2008) Automatic closed-loop control comes of age for aluminum extrusion. Proceedings of 9th International Aluminum Extrusion Technology Seminar, 13–16 May 2008, Orlando Florida,Vol. 1, pp 99–110
Abdul-Jawwad AK, Bashir A (2011) A comprehensive model for predicting profile exit temperature of industrially extruded 6063 aluminum alloy. Mater Manuf Process 26:193–201
Benedyk JC (2008) The evolution of the smart container: achieving isothermal control in extrusion. Light Metal Age: 40–47
Cuellar Matamoros CF (1999) Modeling and control for the isothermal extrusion of aluminum. Dissertation, Swiss Federal Institute of Technology, Zurich
Zhou J, Li L, Duszczyk J (2004) Computer simulated and experimentally verified isothermal extrusion of 7075 aluminium through continuous ram speed variation. J Mater Process Technol 4(2):203–212
Laue K, Stenger H (1981) Extrusion: process, machinery, tooling. ASM International, Metals Park
Bastani AF, Aukrust T, Brandal S (2010) Study of isothermal extrusion of aluminum using finite element simulations. Int J Mater Form 3(1):367–370
Bastani AF, Aukrust T, Brandal S (2011) Optimisation of flow balance and isothermal extrusion of aluminium using finite-element simulations. J Mater Process Technol 211:650–667
Lucignano C, Montanari R, Tagliaferri V, Ucciardello N (2010) Artificial neural networks to optimize the extrusion of an aluminium alloy. J Intell Manuf 21(4):569–574
Ramsay JO, Silverman BW (2005) Functional data analysis, 2nd edn. Springer, New York
Ramsay JO, Silverman BW (2002) Applied functional data analysis: methods and case studies. Springer, New York
Ferraty F, Vieu P (2006) Nonparametric functional data analysis: theory and practice, Springer series in statistics. Springer, NewYork
Bosq D, Blanke D (2007) Inference and prediction in large dimensions. Wiley, Chichester
Ullah S, Finch CF (2013) Applications of functional data analysis: a systematic review. BMC Med Res Methodol 13:43
Manteiga WG, Vieu P (2007) Statistics for functional data. Comput Stat Data Anal 51(10):4788–4792
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lela, B., Musa, A. & Zovko, O. Model-based controlling of extrusion process. Int J Adv Manuf Technol 74, 1267–1273 (2014). https://doi.org/10.1007/s00170-014-6054-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6054-6