Skip to main content

Advertisement

SpringerLink
Log in

Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Value stream mapping (VSM) is an important tool of the lean approach and is used to identify value-adding activities and those considered wasteful of materials and the flow of information and people. However, when not applied correctly, VSM can complicate the identification of waste, lead to misinterpretations and assessment mistakes, and undermine the implementation of future improvements. The purpose of this paper is to investigate the main difficulties and limitations encountered during the construction of current state maps, analysis of the associated causes, and pointing out of guidelines to facilitate the use of VSM to map processes. To do so, a search and evaluation of papers in journals, conferences, theses, and dissertations was conducted, and the articles were categorized according to the field of application (factory floor, supply chain, product development and services) and approach (theoretical or practical). In conclusion, this paper criticizes some ways that VSM has been used, observing that important constraints created by its application must be considered and that when used incorrectly, the tool can lead to mistakes that can cause problems instead of benefits. Considering the problems identified, the paper suggests future works for improving the use of VSM for mapping processes.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Álvarez R, Calvo R, Peña MM, Domingo R (2008) Redesigning an assembly line through lean manufacturing tools. Int J Adv Manuf Technol 43(9–10):949–958

    Google Scholar 

  2. Alves, T.C. L., Tommelein, I. D., Ballard, G. 2005. Value stream mapping for make-to-order products in a job shop environment. Construction Research Congress, California

  3. Ar, R., Ashraf, M. 2012. Production flow analysis through value stream mapping: a lean

  4. Arbulu, R. J., Tommelein, I. D. 2002. VSA of construction supply chains: case study on pipe supports used in power plants. Proceedings IGLC-10. Gramado, Brazil.

  5. Bauch C (2004) Lean product development: making waste transparent. Mechanical Engineering Thesis, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  6. Belova IM, Yansong Z (2008) Value stream mapping for waste reduction in playing system components flow. Dissertation, Jönköping International Business School, Jönköping

    Google Scholar 

  7. Bhasin S (2012) Performance of Lean in large organisations. J Manuf Syst 31(349–357)

    Google Scholar 

  8. BIPM, IEC, IFCC, ILAC, IUPAC, IUPAP, ISO, OIML (2008) The international vocabulary of metrology—basic and general concepts and associated terms (VIM). 3rd edition. JCGM

  9. Carr AS, Kaynak H, Hartley JL, Ross A (2008) Supplier dependence: impact on supplier’s participation and performance. Int J Oper Prod Manag 28(9):899–916

    Article  Google Scholar 

  10. Chen JC, Cheng C, Huang PB (2012) Supply chain management with lean production and RFID application: a case study. Expert Syst Appl 40(2013):3389–3397

    Google Scholar 

  11. Chiavenato I (1997) Introdução à Teoria Geral da Administração. Makron Books, São Paulo, Brazil

    Google Scholar 

  12. Childerhouse P, Towil DR (2004) Impact of reducing uncertainty in European supply chains. J Manuf Technol Manag 15(7):585–598

    Article  Google Scholar 

  13. Chitturi RM, Glew DJ, Paul A (2007) Value stream mapping in a jobshop. IET Conference on Agile Manufacturing (ICAM), Duhan

  14. Dal Forno AJ (2008) Aplicação e análise das ferramentas Benchmarking Enxuto e Mapeamento do Fluxo de Valor: estudo de caso em três empresas catarinenses. Production Engineering Dissertation. Universidade Federal de Santa Catarina, Florianópolis, Brazil

  15. Dal Forno AJ, Forcellini FA, Crestani PA (2010) A abordagem enxuta aplicada ao agro-negócio: estudo de caso em um viveiro de mudas florestais. XXX Encontro Nacional de Engenharia de Produção. São Carlos, SP, Brazil

    Google Scholar 

  16. Dal Forno AJ, Forcellini FA, Pereira FA (2009) Um procedimento simples para evitar as causas dos desperdícios nas tarefas do PDP. In: CBGDP—Congresso Brasileiro de Desenvolvimento de Produto. São José dos Campos, SP, Brazil

  17. Dennis P (2007) Lean production simplified. Productivity Press, 2nd edition

  18. Domingo R, Alvarez R, Peña MM, Calvo R (2007) Materials flow improvement in a lean assembly line: a case study. Working Paper: Department of Manufacturing Engineering, Madrid

    Google Scholar 

  19. Eisler M, Horbal R, Koch T (2007) Cooperation of lean enterprises—techniques used for lean supply chain. IFIP Int Fed Inf Process, Adv Prod Manag Syst 246:363–370

    Google Scholar 

  20. Erhart A, Neumann CSR, Gerhardt MPG (2004) Mapeamento do Fluxo de Valor aplicado a um Centro de Tratamento de Cartas. XXIV Encontro Nacional de Engenharia de Produção, Florianópolis, Brazil, In

    Google Scholar 

  21. Eswaramoorthi M, Kathiresan GR, Prasad PSS, Mohanram PV (2010) A survey on lean practices in Indian machine tool industries. The International Journal of Advanced Manufacturing Technology. Springer, London

    Google Scholar 

  22. Fargher JSW (2006) Lean manufaturing and remanufacturing implementation tools. Working Paper: The Remanufacturing Institute, Rolla

    Google Scholar 

  23. Fernandes PA (2001) Framework for a strategy driven manufacturing system design in an aerospace environment—design beyond factory floor. Aeronautics and Astronautics Dissertation, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  24. Frenkel YM (2004) Enterprise level value stream mapping and value stream analysis for aircraft carrier components. Mechanical Engineering Dissertation, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  25. Gidley S (2009) The tools of lean—value stream mapping. Available at http://www.asq-1302.org/Presentations/VSM.pdf (acessed Nov 2009)

  26. Glover WJ, Liu W, Farris JA, Aken EMV (2013) Characteristics of established kaizen event programs: an empirical study. Int J Oper Prod Manag 33(9):1166–1201

    Article  Google Scholar 

  27. Goubergen DV et al. (2002) Using value stream mapping to redesign engineering project work. Proceedings 14th European Simulation Symposium

  28. Grewal CS, Singh B (2009) Application of value stream mapping in a traditional Indian environment: a case study. Meas Bus Excell 13(3):58–68

    Article  Google Scholar 

  29. Grove AL, Meredith JO, MacIntyre M, Angelis J, Neailey K (2010) UK health visiting: challenges faced during lean implementation. Leadersh Health Serv 23(3):204–218

    Article  Google Scholar 

  30. Gurumurthy A, Kodali R (2011) Design of lean manufacturing systems using value stream mapping with simulation: a case study. J Manuf Technol Manag 22(4):444–473

    Article  Google Scholar 

  31. Hines P, Bicheno J, Brunt D, Taylor D (1999) Value stream management. Int J Logistics Manag 9(1):25–42

    Article  Google Scholar 

  32. Hines H, Rich N, Esain A (1999) Value stream mapping: a distribution industry application. Benchmarking: An Int J 6(1):60–77

    Article  Google Scholar 

  33. Högfeldt D (2005) Plant efficiency: a value stream mapping and overall equipment effectiveness study. Mechanical Engineering Dissertation. Luleä Technology University, Universidade Luleä

  34. Horbal R, Kagan R, Koch T (2008) Implementing lean manufacturing in high-mix production environment. Lean business systems and beyond. IFIP International Federation for Information Processing, Boston-Springer, 257-267

  35. Ivovenko S, Bradley J (2004) TRIZ as a lean thinking tool. ETRIA TRIZ Future Conference, Florence, Italy

    Google Scholar 

  36. Jones C et al (1999) The lean enterprise. BT Technol J 17(4)

  37. Kalsaas BT (2002) Value stream mapping: an adequate method for going lean? NOFOMA, The 14th international conference, Trondheim

  38. Kato J (2005) Development of a process for continuous creation of lean value in product development organizations. Mechanical Engineering Dissertation, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  39. Keyte B, Locher D (2004) The complete lean enterprise: value streams mapping for administrative and office process. Productivity Press, New York

    Book  Google Scholar 

  40. Khaswala ZN, Irani SA (2001) Value Network Mapping (VNM): visualization and analysis of multiple flows in value stream maps. Proceedings of the Lean Management Solutions Conference, St. Louis, MO

  41. Klotz L, Horman M (2007) Transparency, process mapping and environmentally sustainable building projects. Proceedings IGLC-15. Michigan

  42. Klotz L, Horman M, Bi HH, Bechtel J (2008) The impact of process mapping on transparency. Int J Product Perform Manag 57(8):623–636

    Article  Google Scholar 

  43. Klotz L, Horman M, Bodenschatz M (2007) A lean modeling protocol for evaluating gree project delivery. Lean Constr J 3(1):1–18

    Google Scholar 

  44. Kuhlang P, Edtmayr T, Sihn W (2011) Methodical approach to increase productivity and reduce lead time in assembly and production-logistic processes. CIRP J Manuf Sci Technol 4(24–32)

    Google Scholar 

  45. Lasa IS, Laburu CO, Vila RC (2008) An evaluation of the value stream mapping tool. Bus Process Manag J 14(1):39–52

    Article  Google Scholar 

  46. Leopoulos V, Voulgaridou D, Bellos E, Kirytopoulos K (2010) Integrated management systems: moving from function to organisation/decision view. TQM J 22(6):594–628

    Article  Google Scholar 

  47. Liker JK, Meier D (2005) Toyota Way Fieldbook. McGraw-Hill, New York

    Google Scholar 

  48. Mackenzie SA (2006) Utilizing value stream mapping in air force acquisition program offices. Management and Engineering Dissertation, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  49. Martins PG, Laugeni FP (2006) Administração da Produção. São Paulo: Saraiva, Brazil

  50. Mazur LM, Chen S (2007) Understanding and reducing the medication delivery waste via systems mapping and analysis. Health Care Manag Sci 11(1):55–65

    Article  Google Scholar 

  51. McManus HL (2005) Product development value stream mapping manual (PDVSM). Lean Aerospace initiative, MIT, USA

    Google Scholar 

  52. McManus HL, Millard RL (2002) Value stream analysis and mapping for product development. Proceedings of the International Council of the Aeronautical Sciences. 23rd ICAS Congress, Toronto

  53. Monden Y (1998) Toyota production system: an integrated approach to just-in-time, 3rd edn. Engineering & Management Press, Norcross, GA

    Google Scholar 

  54. Nash MA, Poling SR (2008) Mapping the total value stream: a comprehensive guide for production and transactional processes. Productive Press, Nova York

    Google Scholar 

  55. Ohno T (1998) Toyota production system: beyond large-scale production. Productivity Press, Portland

    Google Scholar 

  56. Patneaude SM (2002) Transforming commercial aerospace supply chain management practices by utilizing Toyota Production System principles, practices, and methodologies. Engineering and Management Dissertation, Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  57. Pettersensen J (2009) Defining lean production: some conceptual and practical issues. TQM J 21(2):127–142

    Article  Google Scholar 

  58. Pizzol WA, Maestrelli NC (2004) Uma proposta de aplicação do mapeamento do fluxo de valor a uma nova família de produtos. XXIV Encontro Nacional de Engenharia de Produção. Florianópolis, Brazil

    Google Scholar 

  59. Potter A, Schmidt F, Simons D (2003) Supply chain efficiency. Integrated transport into supply chains conference. Cardiff, United Kingdon

    Google Scholar 

  60. Queiroz, J. A., Rentes, A. F., Araujo, C. A. C. 2004. Transformação enxuta: aplicação do Mapeamento do Fluxo de Valor em uma situação real. XXIV Encontro Nacional de Engenharia de Produção. Florianópolis, Brazil

  61. Qui Y, Tannock JDT (2010) Dissemination and adoption of quality management in China: case studies of Shangai manufacturing industries. Int J Qual Reliab Manag 27(9):1067–1081

    Article  Google Scholar 

  62. Rother M, Shook J (1999) Learning to see: value stream mapping to add value and eliminate MUDA. Lean Enterprise Institute

  63. Sahoo AK, Singh RS, Tiwari MK (2007) Lean philosophy: implementation in a forging company. Int J Adv Manuf Technol 36(5–6):451–462

    Google Scholar 

  64. Salzman R (2002) Manufacturing system design: flexible manufacturing systems and value stream mapping. Mechanical Engineering Dissertation. Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  65. Schonberger RJ (2007) Japanese production management: an evolution—with mixed success. J Oper Manag 25(2):403–419

    Article  Google Scholar 

  66. Seth D, Seth N, Goel D (2008) Application of value stream mapping (VSM) for minimization of wastes in the processing side of supply chain of cottonseed oil industry in Indian context. J Manuf Technol Manag 19(4):529–550

    Article  Google Scholar 

  67. Shen SX, Han CF (2007) China electrical manufacturing service industry value stream mapping collaboration. Int J Flex Manuf Syst 18(4):285–303

    Article  Google Scholar 

  68. Shetty D, Ali A, Cummings R (2010) Survey-based spreadsheet model on lean implementation. Int J Lean Six Sigma 1(4):310–334

    Article  Google Scholar 

  69. Shingo S. (1988) Non-stock production: the Shingo system of continuous improvement. Productivity Press

  70. Singh H, Singh A (2013) Application of lean manufacturing using value stream mapping in an auto-parts manufacturing unit. J Adv Manag Res 10(1):72–84. doi:10.1108/09727981311327776

  71. Singh B, Garg SK, Sharma SK (2010) Lean implementation and its benefits to production industry. Int J Lean Six Sigma 1(2):157–168

    Article  Google Scholar 

  72. Singh B, Garg SK, Sharma SK (2010) Value stream mapping: literature review and implications for Indian industry. Int J Adv Manuf Technol, Spring

  73. Sobcsyc T, Koch T (2008) A method for measuring operational and financial performance of a production value stream. IFIP Int Fed Inform Process 257:151–163

    Article  Google Scholar 

  74. Sondalini M (2006) Profit contribution mapping. Proceedings of the 1st World Congress on Engineering Asset Management (WCEAM). Perth Area

  75. Soto L (2007) Construction design as a process for flow: applying lean principles to construction design. Management and Engineering Dissertation. Massachusetts Institute of Technology, Massachusetts

    Google Scholar 

  76. Stump B, Badurdeen F (2009) Integrating lean and other strategies for mass customization manufacturing: a case study. J Intell Manuf, Springer

  77. Taylor DH (2005) Value chain analysis: an approach to supply chain improvement in agri-food chains. Int J Phys Distrib Logist Manag 35(10):744–761

    Article  Google Scholar 

  78. Tubino, D. F. 2007. Planejamento e controle da produção: teoria e prática. São Paulo: Atlas

  79. Vlachos I, Bogdanovic A (2013) Lean thinking in the European hotel industry. Tourism Management 36:354e–363e

    Article  Google Scholar 

  80. Vinodh S, Arvind KR, Somanaathan M (2010). Application of value stream mapping in an Indian camshaft manufacturing organisation. J Manuf Technol Manag 21(7):888–900. doi:10.1108/17410381011077973

    Google Scholar 

  81. Vinodh S, Somanaathan M, Arvind KR (2013) Development of value stream map for achieving leanness in a manufacturing organization. J Eng Des Technol 11(2):129–141. doi:10.1108/JEDT-01-2010-0007

    Google Scholar 

  82. Wee HM, Wu S (2009) Lean supply chain and its effect on product cost and quality: a case study on Ford Motor Company. Supply Chain Manag: Int J 14(5):335–341

    Article  Google Scholar 

  83. Womack JP, Jones DT (2003) Lean thinking: banish waste and create wealth in your organization. Hardcover, Free Press, second edition

  84. Womack JP, Jones DT, Roos D (1990) The machine that changed the world: the story of lean production. Rawson Associates, New York

    Google Scholar 

  85. Xie Y, Peng Q (2012) Integration of value stream mapping and agent-based modeling for OR improvement. Bus Process Manag J 18(4):585–599

    Article  MathSciNet  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Production and Systems Engineering, Santa Catarina Federal University (UFSC), Florianópolis, Brazil

    Ana Julia Dal Forno & Fernando Antonio Forcellini

  2. Department of Chemistry and Physics and the Post-Graduation Program in Industrial Systems and Processes, University in Santa Cruz do Sul (UNISC), Santa Cruz do Sul, Brazil

    Fernando Augusto Pereira & Liane M. Kipper

Authors
  1. Ana Julia Dal Forno
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fernando Augusto Pereira
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Fernando Antonio Forcellini
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Liane M. Kipper
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ana Julia Dal Forno.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Forno, A.J.D., Pereira, F.A., Forcellini, F.A. et al. Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools. Int J Adv Manuf Technol 72, 779–790 (2014). https://doi.org/10.1007/s00170-014-5712-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-014-5712-z

Keywords

Search

Navigation