Abstract
New technology using nanoparticles as an additive in lubricants is recently becoming an attractive topic of study. The performance of SiO2 nanoparticles in the lubrication system is investigated. Tests were conducted for nanolubrication mixing ratios of 0.0, 0.1, 0.2, 0.5, 0.55, 0.6, and 0.8 wt% with plain bearings rotated by a 2,750-rpm high-speed motor. For each mixing ratio, the frictional temperature and wear rate of the rotating sliding bearings were recorded and compared. During surface testing, the surface roughness values of the sliding bearings were compared and the results showed an improvement in surface roughness after the tests. According to the outcome, the optimum tribological performance of nanolubricant was obtained at 0.5 wt% mixing ratio.
Similar content being viewed by others
References
Dilbag S, Rao PV (2008) Performance improvement of hard turning with solid lubricants. Int J Adv Technol 38:529–535
Sayuti M, Sarhan AAD, Fadzil M, Hamdi M (2012) Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach. Int J Adv Manuf Technol 60(9-12):939–950
Rahmati B, Sarhan AAD, Sayuti M (2013) Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy. Int J Adv Manuf Technol. doi:10.1007/s00170-013-5334-x
Rahmati B, Sarhan ADA, Sayuti M (2013) Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining. J Clean Prod. doi:10.1016/j.jclepro.2013.10.048
Kumar MNVR, Sameti M, Mohapatra SS, Kong X, Lockey RF, Bakowsky U, Lindenblatt G, Schmidt CH, Lehr C-M (2004) Cationic silica nanoparticles as gene carriers: synthesis, characterization and transfection efficiency in vitro and in vivo. J Nanosci Nanotechnol 4(7) 876-881(6)
Chen J (2010) Tribology properties of Polytetrafluoroethylene, nano-titanium dioxide, and nano-silicon dioxide as additives in mixed oil-based titanium complex grease. Tribol Lett 38:217–224
Sarhan AAD, Sayuti M, Hamdi M (2012) Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system. Int J Adv Manuf Technol. doi:10.1007/s00170-012-3940-7
Lee K, Hwang Y, Cheog S, Kwon L, Kim S, Lee J (2009) Performance evaluation of nano-lubricants of fullerence nanoparticles in refrigeration mineral oils. Curr Appl Phys 9:e128–e131
Li W, Zheng SH, Cao BQ, Ma SY (2011) Friction and wear properties of ZrO2/SiO2 composite nanoparticles. J Nanopart Res 13:2129–2137
Liu G, Li X, Qin B, Xing D, Guo Y, Fan R (2004) Investigate of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface. Tribol Lett 17(4):961–966
Sayuti M, Sarhan AAD, Hamdi M (2013) An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy. Int J Adv Manuf Technol. doi:10.1007/s00170-012-4527-z
Yusof F (2006) Optimization of control parameters for self-lubricating characteristics in a tin base composite. MEng. Thesis. University of Malaya: Malaysia
Zhang Z, Yan J, Kuriyagaa T (2011) Study on tool wear characteristics in diamond turning of reaction-bounded silicon carbide. Int J Adv Manuf Technol 57:117–125
Sia SY, Ahmed AD (2013) Sarhan morphology investigation of worn bearing surfaces using SiO2 nanolubrication system. Int J Adv Manuf Technol. doi:10.1007/s00170-013-5340-z
Budinski KG, Budinski MK (2010) Engineering materials: properties and selection, Chapter 5 The role of tribology in engineering materials. Pearson Eucation Inc., New Jersey, pp 95–132
Sayuti M, Sarhan AAD, Tanaka T, Hamdi M, Saito Y (2013) Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system. Int J Adv Manuf Technol 65(9–12):1493–1500
Sparham M, Sarhan AAD, Mardi NA, Hamdi M (2013) Designing and manufacturing an automated lubrication control system in CNC machine tool guideways for more precise machining and less oil consumption. Int J Adv Manuf Technol. doi:10.1007/s00170-013-5325-y
Adibi H, Rezaei SM, Sarhan AAD (2013) Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas. Int J Adv Manuf Technol. doi:10.1007/s00170-013-5471-2
Emami M, Sadeghi MH, Sarhan AAD, Hasani F (2013) Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic. J. Clean. Prod. doi:10.1016/j.jclepro.2013.11.018
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sia, S.Y., Bassyony, E.Z. & Sarhan, A.A.D. Development of SiO2 nanolubrication system to be used in sliding bearings. Int J Adv Manuf Technol 71, 1277–1284 (2014). https://doi.org/10.1007/s00170-013-5566-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5566-9