Skip to main content
Log in

Bi-level modularity concept within a robotic assembly module of a microfactory setting

  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript


The aim of this work is to ameliorate development time and increase reconfigurability for microfactories by developing a module structure for production and assembly in order to form a layout for the production of a specific product when cascaded to each other. The module structure facilitates changes to configure the layout of the microfactory setting for the production of another product. This feature brings flexibility to the system in the sense of product design and customization of products. Each module, having its own control system, is able to perform its duty with the task units placed into it. In this work, the concept of process-oriented modules with bi-level modularity is introduced for the development of the mentioned module structure. The concept is tested with the implementation of a robotic assembly module. The realization of the assembly module includes miniaturization of task units like the parallel manipulators, transportation system in between the assembly nodes or in between different modules, and control system hardware. Visual sensor utilization for the visual feedback is also enabled for the assembly process at the necessary nodes. The assembly module is developed, and experiments are realized in order to test the performance of the module.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others


  1. Furuta K (2000)The experimental microfactory system in Japanese national R&D project. Singapore-Japan Forum on MEMS, 23 November 2000, Singapore

  2. Microfactory prototype, October 2011.

  3. Suda M, Furata K, Sakuhara T (2000) Akata T The microfactory system using electrochemical machining. Galvanotechnik J Jpn 90(9):2607–2609

    Google Scholar 

  4. Dobler H, Kuhn C, Klumpp B (2001) Innovative biochip production systems. Paper presented at the final conference program, LabAutomation, Palm Springs, CA, 27–31 January 2001

  5. Dobler H, Kuhn C, Klumpp B (2000) Innovative solutions for biochip production systems. 2nd International Workshop on Microfactories, p. 115–118, October 2000

  6. Gaugel T, Dobler H, Nelson BJ (2001) Advanced Modular Micro-Production System (AMMS). Proceedings of SPIE—The International Society for Optical Engineering 4568, pp. 278–285

  7. Gaugel T, Dobler H, Rohrmoser B, Klenk J, Neugebauer J, Schäfer W (2000) Advanced modular production concept for miniaturized production. 2nd International Workshop on Microfactories. IWMF 2000:35–38

    Google Scholar 

  8. Hollis RL, Quaid A (1995) An architecture for agile assembly. Proc Am Soc of Precision Engineering, October

  9. Lauwers TB, Edmondson ZK, Hollis RL (2004) Progress in agile assembly: minifactory couriers based on free-roaming planar motors, 4th international Workshop on Microfactories. IWMF 1:7–10, October 2004

    Google Scholar 

  10. Heikkila RH, Karjalainen IT, Uusitalo JJ, Vuola AS, Tuokko RO (2007) Possibilities of a microfactory in the assembly of small parts and products: first results of the M4-project. Assembly and Manufacturing, 2007. ISAM '07. IEEE International Symposium on, vol., no., pp.166–171, 22–25 July 2007

  11. Heikkilä R, Huttunen A, Vuola A, Tuokko R (2008) Microfactory concept for manufacturing of personalized medical implant. Proceedings of the 6th International Workshop on Microfactories IWMF 2008, October 2008

  12. Prusi T, Uusitalo J, Heikkilä R, Tuokko R (2008) Visual on-line measurement in a laser micro lathe. Proceedings of the 6th International Workshop on Microfactories IWMF 2008, October 2008

  13. Verettas I, Clavel R, Codourey A (2006) PocketFactory: a modular and miniature assembly chain including a clean environment. Proceedings of the 6th International Workshop on MicroFactories IWMF 2006, October 2006

  14. Naskali AT Software framework for the implementation of high precision system design. Ph.D. Thesis, Sabanci University, İstanbul, Turkey, Ongoing

  15. Clavel R (1991) Conception d'un robot parallèle rapide à 4 degrés de liberté. Ph.D. Thesis, EPFL, Lausanne, Switzerland

  16. Kunt ED, Naskali AT, Sabanovic A Miniaturization of devices for the development of small scale modular manufacturing and assembly systems. Mechatronics, Submitted

  17. Laribi AB, Romdhane L, Zeghloul S (2007) Analysis and dimensional synthesis of the DELTA robot for a prescribed workspace. Mech Mach Theory 42:859–870

    Article  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations


Corresponding author

Correspondence to E. D. Kunt.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Naskali, A.T., Kunt, E.D. & Sabanovic, A. Bi-level modularity concept within a robotic assembly module of a microfactory setting. Int J Adv Manuf Technol 66, 1255–1269 (2013).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: