Abstract
The variety of vision inspection systems for welding defects in the present manufacturing scenario is needed for overcoming certain limitations such as the problem of inaccuracy in the images, non-uniformed illumination, noise and deficient contrast, and confusion in defects if they occur in the same spot at the surface and subsurface. Hence, it is imperative to design a new vision inspection system which will enable to overcome the aforementioned problems in welding. A sophisticated new vision inspection system using machine vision has been developed for this study to identify and classify the surface defects of butt joint as per standard EN25817 in metal inert gas (MIG) welding. In this proposed vision system, images of welding surfaces are captured through a CCD camera. Four frames of sequence of images are obtained using four zones of LEDs using the front light illumination system in this method. From these images, the regions of interest are segmented and the average gray levels of the characteristic features of these images are calculated. The same process can be extended further to four zones (four quadrants) of four types of welded joints. Finally, welded joints can be classified into one of the four predefined ones based on the back-propagation neural network. The proposed system demonstrates an overall accuracy of 95% from the 80 real samples tested.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Shafeek HI, Gadelmawla ES, Abdel-Shafy AA, Elewa IM (2004) Assessment of welding defects for gas pipeline radiographs using computer vision. NDT&E International 37:291–299
Warren Liao T (2009) Improving the accuracy of computer-aided radiographic weld inspection by feature selection. NDT&E International 42:229–239
Shafeek HI, Gadelmawla ES, Abdel-Shafy AA, Elewa IM (2004) Automatic inspection of gas pipeline welding defects using an expert vision system. NDT&E International 37:301–307
Kim T-H, Cho T-H, Moon YS, Park SH (1999) Visual inspection system for the classification of solder joints. Pattern Recognition 32:565–575
Jagannathan S (1997) Automatic inspection of wave soldered joints using neural networks. J Manuf Syst 16(6):389–398
Jagannathan S (1992) Intelligent inspection of wave soldered joints—technical report. Journal of Manufacturing Systems 11(2):137–143
Gauss M, Buerkle A, Laengle T, Woern H, Stelter J, Ruhmkorf S, Middelmann R (2003) Adaptive robot based visual inspection of complex parts. ISR2003
Malamas EN, Petrakis EGM, Zervakis M, Petit L (2003) A survey on industrial vision systems, applications and tools. Image and Computing 21:171–188
Liao TW, Li D-M, Li Y-M (1999) Detection of welding flaws from radiographic images with fuzzy clustering methods. Fuzzy Set Syst 108:145–158
Lashkia V (2001) Defect detection in X-ray images using fuzzy reasoning. Image and Vision Computing 19:261–269
Liao TW (2003) Classification of welding flaw types with fuzzy expert systems. Expert Systems with Application 25:101–111
da Silva RR, Caloba LP, Siqueira MHS, Rebello JMA (2004) Pattern recognition of weld defects detected by radiographic test. NDT&E International 37:461–470
Vilar R, Zapata J, Ruiz R (2009) An automatic system of classification of weld defects in radiographic images. NDT&E International 42:467–476
Liao TW, Li YM (1998) An automated radiographic NDT system, for weld inspection: Part II—Flaw detection. NDT&E International 31(3):183–192
Wang G, Liao TW (2002) Automatic identification of different types of welding defects in radiographic images. NDT &E International 35:519–528
Sonka M, Hilavac H, Boyle R (1998) Image processing, analysis and machine vision, 2nd edn. PWS Publishing, Pacific Grove
Carrasco M, Merry D (2011) Automatic multiple view inspection using geometrical tracking and feature analysis in aluminum wheels. Machine Vision and Applications 22:157–170
Wang Y, Sun Y, Lv P, Wang H (2008) Detection of line weld defects based on multiple thresholds and support vector machine. NDT&E International 41:517–524
Waren Liao T, Li Damin, Li Yueming (2000) Extraction of welds from radiographic images using fuzzy classifiers. Information Sciences 126:21–40
Waren Liao T, Tang K (1997) Automated extraction of welds from digitized radiographic images based on MLP neural networks. Appl Artif Intell 11:197–218
Garcia-Allende PB, Mirapeix J, Conde OM, Cobo A, Lopez-Higuera JM (2009) Spectral processing technique based on feature selection and artificial neural networks for arc-welding quality monitoring. NDT&E International 42:56–63
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Senthil Kumar, G., Natarajan, U. & Ananthan, S.S. Vision inspection system for the identification and classification of defects in MIG welding joints. Int J Adv Manuf Technol 61, 923–933 (2012). https://doi.org/10.1007/s00170-011-3770-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3770-z