Abstract
Gravity-feed micro-hole machining using spark assisted chemical engraving (SACE) has achieved repeatable hole drilling up to few hundred microns in depth. However, the tool wear and tool thermal expansion were not included in these measurements. In this paper, quantitative results are presented for the tool wear and tool expansion for three tool electrode materials: tungsten, steel and stainless steel. A simplified lumped thermal model predicting tool expansion and its dynamics is presented. It is as well demonstrated how the tool electrode temperature can be controlled by pulsed voltage supply. These results will enable higher measurement accuracy and therefore more precise micro-machining by SACE.
References
Wüthrich R (2009) Micromachining using electrochemical discharge phenomenon: fundamentals and applications of spark assisted chemical engraving. William Andrew, Norwich
Wüthrich R, Fascio V (2005) Machining of non-conductive materials using electrochemical discharge phenomenon—an overview. Int J Mach Tools Manuf 45:1095–1108
Allesu K, Ghosh A, Muju MK (1992) Preliminary qualitative approach of a proposed mechanism of material removal in electrical machining of glass. Eur J Mech Eng 36:202–207
Yang CT, Ho SS, Yan BH (2001) Micro hole machining of borosilicate glass through electrochemical discharge machining (ECDM). Key Eng Mater 196:149–166
Fascio V, Wüthrich R, Bleuler H (2004) Spark assisted chemical engraving in the light of electrochemistry. Electrochim Acta 49:3997–4003
Jalali M, Maillard P, Wüthrich R (2009) Towards a better understanding of glass gravity-feed micro-hole drilling with electrochemical discharges. J Micromech Microeng 19:045001
Kim DJ, Ahn Y, Lee SH, Kim YK (2006) Voltage pulse frequency and duty ratio effects in a electrochemical discharge microdrilling process of Pyrex glass. Int J Mach Tools Manuf 46:1064–1067
Zheng ZP, Su HC, Huang FY, Yan BH (2007) The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge microdrilling process. J Micromech Microeng 17:265–272
Zheng ZP, Cheng WH, Huang FY, Yan BH (2007) 3D microstructuring of Pyrex glass using the electrochemical discharge machining process. J Micromech Microeng 17:960–966
Kurafuji H, Suda K (1968) Electrical discharge drilling of glass. Ann CIRP 16:415–419
Wüthrich R, Spaelter U, Wu Y, Bleuler H (2006) A systematic characterisation method for gravity feed micro-hole drilling in glass with spark assisted chemical engraving (SACE). J Micromech Microeng 16:1891–1896
Didar TF, Dolatabadi A, Wüthrich R (2008) Characterization and modeling of 2D-glass micro-machining by spark-assisted chemical engraving (SACE) with constant velocity. J Micromech Microeng 18:065016
Wüthrich R, Fujisaki K, Couthy P, Hof LA, Bleuler H (2005) Spark assisted chemical engraving (SACE) in microfactory. J Micromech Microeng 15:S276–S280
Tsutsumi C, Okano K, Suto T (1993) High quality machining of ceramics. J Mater Proc Technol 37:639–654
Chark SK, Rao PV (2007) Trepanning of Al2O3 by electro-chemical discharge machining (ECDM) process using abrasive electrode with pulsed DC supply. Int J Mach Tools Manuf 47:2061–2070
Kellogg HH (1950) Anode effect in aqueous electrolysis. J Electrochem Soc 97:133–142
Reghuram V (1994) Electrical and spectroscopic investigations in electrochemical discharge machining. PhD dissertation, Indian Institute of Technology, Madras and Indian Institute of Technology, Kanpur
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abou Ziki, J.D., Wüthrich, R. Tool wear and tool thermal expansion during micro-machining by spark assisted chemical engraving. Int J Adv Manuf Technol 61, 481–486 (2012). https://doi.org/10.1007/s00170-011-3731-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-011-3731-6