Skip to main content
SpringerLink
Log in

Part decomposing algorithm based on STL solid model used in shape deposition manufacturing process

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Shape deposition manufacturing is an innovative rapid prototyping technology combining CNC machining and deposition processes and in which if a surface of the part is visible from the build direction it can be directly shaped into desired geometry on part material; if the part features are undercut or face away from the build direction, these part features will be sculptured into the support material in order to form a negative cavity at first, then the part material is deposited into this negative cavity in order to replicate these features into part material. This process is cyclically repeated until all segments have been built. Finally, the sacrificial material is removed, and the finished part is left. This innovative technology has the benefits of commercial rapid prototyping technology; meanwhile, it inherits the accuracy and high surface quality of traditional machining process. For this process to be realized, it is essential to decompose the CAD solid model into a series of manufacturable segments which have no undercut surfaces at the data pretreatment step. In this paper, a solid decomposing strategy is proposed with a detailed discussion on the classification of the segments based on the value of triangle face normal vector, and then an algorithm for auto-decomposing a CAD solid model in STL data format is developed.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Merz R, Prinz FB, Ramaswami K, Terk M, Weiss LE (1994) Shape deposition manufacturing. Proceedings of the 1994 Solid Freeform Fabrication Symposium. University of Texas, Austin, pp 1–8

    Google Scholar 

  2. Prinz FB, Weiss LE (1994) Method for fabrication of three-dimensional articles. US Patent No. 5301415

  3. McMains SA (2000) Geometric algorithms and data representation for solid freeform fabrication. Dissertation, University of California at Berkeley

  4. Zhou MY (2004) Adaptive slicing of functionally graded material objects for rapid prototyping. Int J Adv Manuf Technol 24(5–6):345–352. doi:10.1007/s00170-003-1623-0

    Article  Google Scholar 

  5. Klosterman D, Chartoff R, Osborne N, Graves G, Lightman A, Han G, Bezeredi A, Rodrigues S (1998) Curved layer LOM of ceramics and composites. Solid Freeform Fabrication Symposium proceedings. University of Texas, Austin, pp 671–680

    Google Scholar 

  6. Klosterman D, Chartoff R, Osborne N, Graves G, Lightman A, Han G, Bezeredi A, Rodrigues S (1999) Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites. Rapid Prototyping J 5(2):61–71. doi:10.1108/13552549910267362

    Article  Google Scholar 

  7. Hur J, Lee K, Zhu H, Kim J (2002) Hybrid rapid prototyping system using machining and deposition. Comput Aided Des 34(10):741–754. doi:10.1016/S0010-4485(01)00203-2

    Article  Google Scholar 

  8. Zhu H, Lee K (2005) Concave edge-based part decomposition for hybrid rapid prototyping. Int J Mach Tools Manuf 45(1):35–42. doi:10.1016/j.ijmachtools.2004.06.015

    Article  MathSciNet  Google Scholar 

  9. Ren L, Sparks T, Ruan JZ, Liou F (2008) Process planning strategies for solid free form fabrication of metal parts. J Manuf Syst 27:158–165. doi:10.1016/j.jmsy.2009.02.002

    Article  Google Scholar 

  10. Sudhalkar A, Bhargava R, Mattikalli R, Chen JM (1990) An introduction to the NOODLES geometric modeling system, Technical report. EDRC, Carnegie Mellon University, Pittsburgh

    Google Scholar 

  11. Ramaswami K, Yamaguchi Y, Prinz FB (1997) Spatial partitioning of solids for solid freeform fabrication. Proceedings of the Fourth ACM Symposium on Solid Modeling and Applications. ACM (Association for Computing Machinery), New York, NY, USA, pp 346–353

  12. Chang YC, Pinilla JM, Kao JH, Ramaswami K, Prinz FB (1999) Automated layer decomposition for additive/subtractive solid freeform fabrication. Solid Freeform Fabrication Symposium. University of Texas, Austin, pp 111–120

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. College of Mechanical Engineering and Automation, Huaqiao University, Quanzhou, Fujian, China, 362021

    Kaiyong Jiang, Changbiao Huang & Bin Liu

Authors
  1. Kaiyong Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Changbiao Huang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Bin Liu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Kaiyong Jiang.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Jiang, K., Huang, C. & Liu, B. Part decomposing algorithm based on STL solid model used in shape deposition manufacturing process. Int J Adv Manuf Technol 54, 187–194 (2011). https://doi.org/10.1007/s00170-010-2941-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-010-2941-7

Keywords

Search

Navigation