Abstract
In the context of virtual development processes of mechatronic systems like machine tools, the preventive assessment of the effects of lightweight structural components on the characteristics of controlled feed systems and therefore on the power and energy requirement of machine tools is of great importance. The modeling of the damping is often limited in practical computation of real machine tools, because they are mostly limited to proportional damping characteristics. Yet the presence of discrete dampers, as for instance, in damping units in guides, or known diverse material damping in construction (components made of glass or carbon fiber-reinforced plastic), demands that the possibility of observance of non-proportional damping, in regard to later model updating, has to be given. The article demonstrates the theoretical state-space modeling of non-proportional damped mechanics using the example of a biaxial vertical lathe.
Similar content being viewed by others
References
Neugebauer R, Scheffler C, Zwingenberger C, Wabner M (2010) Enhanced simulation of static and dynamic stiffness of machine tools. wt-online 5:354–361
Graig RR, Kurdila AJ (2006) Fundamentals of structural dynamics, 2nd edn. Wiley, Hoboken, New York
Prater G, Singh R (1986) Quantification of the extent of non-proportional viscous damping in discrete vibratory systems. J Sound Vib 104(1):109–125
Natke HG (1992) Einführung in die Theorie und Praxis der Zeitreihen- und Modalanalyse (Introduction into theory and practice of time series- and modal analysis). Vieweg Verlag, Braunschweig, Wiesbaden
Irretier H (2004) Experimentelle Modalanalyse–Teil I: Kapitel 1 bis 4 (Experimental modal analysis–Part I: Chapter 1-4), Institut für Mechanik, Universität Kassel
Maia NMM, Silva JMM (1997) Theoretical and experimental modal analysis. Research Studies Press Ltd., Baldock Hertfordshire, UK
Müller FH, Baseler J (1985) Zur Eigenformmethode nichtproportional gedämpfter Schwingungssysteme (About Eigenform method of non-proportional damped elastic systems). Ing Arch 55:448–457
Prakash R, Rao SV (1990) A balancing method for reduced order modelling of unstable systems. Math Comput Modell 14:418–423
Benner P et al (2009) Novel model reduction techniques for control of machine tools, ANSYS Conference & 27. CADFEM Users Meeting 2009, Fakultät für Mathematik, TU Chemnitz, available from: http://archiv.tu-chemnitz.de/pub/2009/0183/index.html
Duff IS (2009) User’s guide for Harwell-Boing sparse matrix collection, 01.06.2009, http://people.sc.fsu.edu/~burkardt/pdf/hbsmc.pdf
Groß H et al (2006) Elektrische Vorschubantriebe in der Automatisierungstechnik (Electric feed drives in automation), 2nd edn. Publicis Corporate Publishing, Erlangen
Gawronski W, Sawicki JT (1996) Response errors of non-proportionally lightly damped structures. J Sound Vib 200(4):543–550
INA. Schaeffler AG, 2010/07, INA Damping carriages RUDS.D, http://medias.ina.de/medias/en!hp.ec.br/RUDS..-D-H;bMCUrYefSU_6
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Neugebauer, R., Scheffler, C., Wabner, M. et al. State space modeling of non-proportional passive damping in machine tools. Int J Adv Manuf Technol 53, 945–952 (2011). https://doi.org/10.1007/s00170-010-2902-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-010-2902-1