Abstract
Semiconductor design rules and process windows continue to shrink, so we face many challenges in developing new processes such as the less 100-nm design rule and the 300-mm wafer. The challenges have become more difficult, and the next generation of defect inspections is urgently needed. Optics and electron beams have been primarily used for the detection of critical defects, but both technologies have disadvantages. The optical inspection is generally not sensitive enough for defects at 100 nm or less, while the scanning electron microscopy inspection has low throughput because it takes a long time to scan 300 mm. To find a solution to these problems, we have proposed a novel optical inspection method for the critical defects on the semiconductor wafer. First, we carried out theoretical examinations and computer simulations. As a result, the proposed method makes it possible to observe a structure with robustness and higher resolution beyond the Rayleigh limit. Second, we developed an apparatus for the basic experiment and carried out the super-resolution experiment using a line and space sample. As a result, the sample structures were clearly resolved beyond the Rayleigh limit and defects on the sample surface were detected with super-resolution.
Similar content being viewed by others
References
International Technology Roadmap for Semiconductors (2006) Metrology 2006 update, Metrology. Semiconductor Industry Association
Kohyama S (1999) SoC solutions and technologies for digital hypermedia platform. IEEE International Electron Devices Meeting, Technical Digest, pp 8–13
Watanabe K, Maeda S, Funakoshi T, Miyazaki Y (2005) Hitachi Rev 54(1):22–26. Available at http://www.hitachi.com/rev/index.html
Westphal V, Hell SW (2005) Nanoscale resolution in the focal plane of an optical microscope. Phys Rev Lett 94:143903
Usuki S, Nishioka H, Takahashi S, Takamasu K (2005) Super-resolution optical inspection for semiconductor defects using standing wave shift. Proc SPIE ISOT2005:60490C-1. doi:10.1117/12.648356
Frohn JT, Knapp HF, Stemmer A (2000) True optical resolution beyond the Rayleigh limit achieved by standing wave illumination. Proc Natl Acad Sci U S A 13(97):7232–7236
Nishioka H et al (2006) A super-resolution microscopy with standing evanescent light and image reconstruction method. Proc IMEKO World Congress, 12, TC2
Usuki S, Nishioka H, Takahashi S, Takamasu K (2007) Experimental verification for super-resolution optical inspection for semiconductor defect by using standing wave illumination shift. Proc ISMTII 2007:387–390
Author information
Authors and Affiliations
Corresponding author
Additional information
Name of conference: ISMTII2007 (8th International Symposium on Measurement Technology and Intelligent Instruments).
Rights and permissions
About this article
Cite this article
Usuki, S., Nishioka, H., Takahashi, S. et al. Experimental verification of super-resolution optical inspection for semiconductor defect by using standing wave illumination shift. Int J Adv Manuf Technol 46, 863–875 (2010). https://doi.org/10.1007/s00170-008-1901-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-008-1901-y