Skip to main content

New friction welding process for pipeline girth welds—welding time optimisation

Abstract

A promising new welding method for fully automatic joining of pipelines has been developed. The proposed welding procedure is a new variant of the conventional friction welding process. A rotating intermediate ring is used to generate the heat necessary to realise the weld. In the first part of this paper, the working principles of the welding process are described. The optimisation of the duration of the friction phase for welding pipes in the material API-5L X42 with an outer diameter of 88.9 mm and a wall thickness of 7.6 and 10.0 mm is discussed. The use of two welding ring materials is discussed, namely a quenched and tempered steel and a normalised fine-grained steel.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    Blackman SA, Dorling DV (2000) Advanced welding processes for transmission pipelines. Proceedings of the 3rd International Pipeline Technology Conference, Brugge, Belgium, p. 371–387, May 21–24

  2. 2.

    Yapp D, Blackman SA Recent developments in high productivity pipeline welding. IIW Doc. No. XII-1786–2004.

  3. 3.

    Gainand Y, Mas JP, Jansen JP, Coiffier JC, Dupont JC, Vauthier C (2000) Laser orbital applied to offshore pipe line construction. Proceedings of the 3rd International Pipeline Technology Conference, Brugge, Belgium 327–342, May 21–24.

  4. 4.

    Hara Y, Toyoda M, Ushio M, Irie H, Masuda H, Yamakawa T (2000) Development of electron beam welding for girth welding of gas transmission pipelines. Pipeline technology II:343–357

    Google Scholar 

  5. 5.

    Kuchuk-Yatsenko SI, Nikitin AS (1999) Flash butt welding of pipes from stainless steels. Stainless Steel World September:43–49

    Google Scholar 

  6. 6.

    Fletcher L, Stubbs C, Stecher G (2004) Developments in the application of MIAB welding of pipelines. Proceedings of the 4th International Pipeline Technology Conference, Ostend, Belgium 1:315–323. May 19–13

  7. 7.

    Kachinskiy V, Krivenko V (2004) MIAB welding of thick-walled pipe ends. TPJ July, http://www.thefabricator.com/TubePipeProduction/TubePipeProduction_Article.cfm?ID=928

  8. 8.

    Ichiyama Y, Asahi H, Hudson RS, Carnes RW, Hebner R (2000) Homopolar pulse welding of martensitic stainless steel linepipe. Proc 3rd Int Pipeline Technol Conf 2:359–369 May 21–24, Brugge, Belgium

    Google Scholar 

  9. 9.

    Carnes RW, Hudson RS, Nichols SP (1997) Advances in homopolar welding of API linepipe for deepwater applications. Joining and Welding for the Oil and Gas Industry, Proceedings, International Conference, London 30–31 Oct. Paper 10.

  10. 10.

    Welding Handbook (1991) 8th Edition, Volume 2, Chapter 23—American Welding Society 739–763.

  11. 11.

    Hazlet RH (1981) Fundamentals of Friction Welding. Source Book on Innovative Welding Processes. American Society for Metals, Materials Park, pp 11–36

    Google Scholar 

  12. 12.

    Ghanimi Y, Cerjak HC, Faes K (2003) Modelling of Friction Welding of Long Components. 6th Int. Trends in Welding Research Conference Proceedings, 15–19 April 2002, Pine Mountain, GA, ASM International 329–333.

  13. 13.

    Afschrift P, Faes K, De Baets P, De Waele W (2004) FRIEX: Friction welding of pipeline girth welds. Proceedings of the 4th International Pipeline Technology Conference, Ostend, Belgium, 9–13, 1:325–334, May

  14. 14.

    Serve M, Appel L, Cramer H (2004) More economically viable friction welding at higher rotation speeds. Welding and Cutting 3(5):298–301

    Google Scholar 

  15. 15.

    Lucas W (1971) Process parameters and friction welds. Met Const Brit Weld J 5(8):293–297

    Google Scholar 

  16. 16.

    Ellis CRG (1972) Continuous drive friction welding of mild steel. Weld J 51:183s–197s

    Google Scholar 

  17. 17.

    Faes K, Dhooge A, Jaspart O, D'Alvise L, Afschrift P, De Baets P (2007) New friction welding process for pipeline girth welds—parameter optimization. Proc Inst Mech Eng B: J Eng Manufacture 221(5):897–907

    Article  Google Scholar 

  18. 18.

    Faes K (2006) FRIEX—new variant of the friction welding process for welding pipelines. Internal final report of project phase 3, December.

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Koen Faes.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Faes, K., Dhooge, A., De Baets, P. et al. New friction welding process for pipeline girth welds—welding time optimisation. Int J Adv Manuf Technol 43, 982–992 (2009). https://doi.org/10.1007/s00170-008-1775-z

Download citation

Keywords

  • Friction welding
  • Pipelines
  • Parameter optimization
  • Welding time