Abstract
Modern CAD/CAM techniques together with five-axis high-speed milling allow to reduce moulds manufacturing time and costs. Nevertheless, in order to put a mould into use, operations of manual finishing and fitting are still always required. Such operations, performed manually by mould makers, modify the milled surfaces of moulds. Reverse engineering techniques can be employed in quality control to evaluate dimensions and geometrical tolerances on moulds after machining and fitting. Changes in the product’s shape are sometimes decided after a mould has already been machined. In such cases, if possible, the mould maker directly modifies the mould. Thus the final real geometry of the mould does not reflect the one of the original CAD model. The aim of this paper is to point out the benefits of non-contact quality control and to illustrate a procedure, based on reverse engineering techniques, to reconstruct and update the mathematical model of the mould after it has been polished and fit. The procedure was tested on a mould for the production of a plastic camera body that was previously inspected by means of a structured light scanner.
Similar content being viewed by others
References
Urbanski JP, Koshy P, Dewes RC, Aspinwall DK (2000) High speed machining of moulds and dies for net shape manufacture. Mater Des 21:395–402
Chiou CJ, Lee YS (2002) A machining potential field approach to tool path generation for multi-axis sculptured surface machining. Comput Aided D 34:357–371 doi:10.1016/S0010-4485(01)00102-6
Lin YJ, Lee TS (1999) An adaptive tool path generation flow chart for precision surface machining. Comput Aided D 31:237–247 doi:10.1016/S0010-4485(99)00024-X
Baptista R, Antune Simoes JF (2000) Three and five axes milling of sculptured surfaces. J Mater Process Technol 103:398–403 doi:10.1016/S0924-0136(99)00479-3
Lee KH, Park HP (2000) Automated inspection planning of free-form shape parts by laser scanning. Robot Cim-Int Manuf 16:201–210 doi:10.1016/S0736-5845(99)00060-5
Son S, Park HP, Lee KH (2002) Automated laser scanning system for reverse engineering and inspection. Int J Mach Tools Manuf 42:889–897 doi:10.1016/S0890-6955(02)00030-5
Gao J, Folkes J, Yilmaz O, Gindy N (2005) Investigation of a 3D non-contact measurement based blade repair integration. Aircr Eng Aerosp Tec 77:34–41 doi:10.1108/00022660510576028
Li Y, Gu P (2005) Inspection of free-form shaped parts. Robot Cim-Int Manuf 21:421–430 doi:10.1016/j.rcim.2004.11.015
Wang Z, Braynstone-Cross PJ, Whitehouse DJ (1996) Phase difference determination by fringe pattern matching. Opt Laser Technol 28(6):417–422 doi:10.1016/0030-3992(96)00015-1
Gühring J (2001) Dense 3-D surface acquisition by structured light using off-the-shelf components. Photonics West, Videometrics VII, vol. 4309, SPIE, San Jose, USA
Pagès J, Salvi J, García R, Matabosch C (2003) Overview of coded light projection techniques for automatic 3D profiling. IEEE International Conference on Robotics and Automation ICRA, Taipei, Taiwan, 133–138
Várady T, Martin RR, Cox J (1997) Reverse engineering of geometric models—an introduction. Comput Aided D 29:255–269 doi:10.1016/S0010-4485(96)00054-1
Tai CC, Huang MC (2000) The processing of data points basing on design intent in reverse engineering. Int J Mach Tools Manuf 40:1913–1927 doi:10.1016/S0890-6955(00)00021-3
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Iuliano, L., Minetola, P. Enhancing moulds manufacturing by means of reverse engineering. Int J Adv Manuf Technol 43, 551–562 (2009). https://doi.org/10.1007/s00170-008-1739-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-008-1739-3