Skip to main content
SpringerLink
Log in

Ultraprecision surface finishing of nano-ZrO2 ceramics using two-dimensional ultrasonic assisted grinding

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Based on the model of a grain cutting trace in workpiece during two-dimensional ultrasonic assisted grinding, microscopic cutting trace of the grain is analyzed, and the grain cutting trace of spiral line is defined, the motion model of the contact between single abrasive particle and workpiece in a vibration period is established during two-dimensional ultrasonic assisted grinding, and the results show that the grain motion mode of two-dimensional ultrasonic assisted grinding is similar to the rotary cutting mode. Grinding experiments on surface quality of nano-ZrO2 ceramic are carried out using diamond grinding in different condition, both with and without ultrasonic vibration. Experimental results show that the surface quality after two-dimensional ultrasonic assisted grinding is superior to that after diamond grinding, and it is easier for two-dimensional ultrasonic assisted grinding as material removal mechanism employs ductile grinding mode.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Yang X-H, Han J-C, Zhang Y-M, Zuo H-B, Zhang X-J (2006) Research on ultrasonic vibration grinding of the hard and brittle materials. Chin J Aeronautics 19:S9–S13

    Google Scholar 

  2. Marinescu D (1998) Laser assisted grinding of ceramics. Interceram 47:314–316

    Google Scholar 

  3. Pfefferkorn F, Lei S (2006) A metric for defining the energy efficiency of thermally-assisted machining. In: Proceedings of the International Conference on Manufacturing Science and Engineering, MSEC 2006

  4. Umehara N (1994) Magnetic fluid grinding—a new technique for finishing advanced ceramics. CIRP Ann 43(1):185–188 doi:10.1016/S0007-8506(07)62192-1

    Article  Google Scholar 

  5. Kumabe J (1985) Precision finishing: foundation and application of vibration cutting (Han Yikun et al. translate). Mechanical Industry, Beijing

    Google Scholar 

  6. Yan Y, Zhao B, Wu Y, Liu C, Zhu X (2006) Study on material removal mechanism of fine-crystalline ZrO2 ceramics under two dimensional ultrasonic grinding. Mater Sci Forum 532–533:532–535

    Article  Google Scholar 

  7. Zhao B, Yan YY, Wu Y, Jiao F, Liu CS (2006) Study on motion model of abrasive particle and surface formation mechanics under two dimensional ultrasonic grinding. Key Eng Mater 315–316:314–318

    Article  Google Scholar 

  8. Jiao Y, Hu P, Pei ZJ, Treadwell C (2005) Rotary ultrasonic machining of ceramics: design of experiments. Int J Manuf Technol Manag 7(2–4):192–206 doi:10.1504/IJMTM.2005.006830

    Article  Google Scholar 

  9. Li ZC, Cai L-W, Pei ZJ, Treadwell C (2006) Edge-chipping reduction in rotary ultrasonic machining of ceramics: finite element analysis and experimental verification. Int J Mach Tools Manuf 46(12–13):1469–1477 doi:10.1016/j.ijmachtools.2005.09.002

    Article  Google Scholar 

  10. Wu C-T, Chen C-K (2001) Study on rotating cutters with different definitions of helical angle. Int J Adv Manuf Technol 17:627–638 doi:10.1007/s001700170125

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai, 200030, China

    Yan Yanyan

  2. School of Mechanical Engineering, Henan Polytechnic University, Henan, 454003, China

    Yan Yanyan & Zhao Bo

  3. School of Mechanical Engineering, Tongji University, Shanghai, 290001, China

    Liu Junli

Authors
  1. Yan Yanyan
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Zhao Bo
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Liu Junli
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yan Yanyan.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Yanyan, Y., Bo, Z. & Junli, L. Ultraprecision surface finishing of nano-ZrO2 ceramics using two-dimensional ultrasonic assisted grinding. Int J Adv Manuf Technol 43, 462–467 (2009). https://doi.org/10.1007/s00170-008-1732-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-008-1732-x

Keywords

Search

Navigation