Skip to main content
SpringerLink
Log in

Rolling element bearing faults diagnosis based on autocorrelation of optimized: wavelet de-noising technique

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Machinery failure diagnosis is an important component of the condition based maintenance (CBM) activities for most engineering systems. Rolling element bearings are the most common cause of rotating machinery failure. The existence of the amplitude modulation and noises in the faulty bearing vibration signal present challenges to effective fault detection method. The wavelet transform has been widely used in signal de-noising, due to its extraordinary time-frequency representation capability. In this paper, a new technique for rolling element bearing fault diagnosis based on the autocorrelation of wavelet de-noised vibration signal is applied. The wavelet base function has been derived from the bearing impulse response. To enhance the fault detection process the wavelet shape parameters (damping factor and center frequency) are optimized based on kurtosis maximization criteria. The results show the effectiveness of the proposed technique in revealing the bearing fault impulses and its periodicity for both simulated and real rolling bearing vibration signals.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Kiral Z, Karagulle H (2003) Simulation and analysis of vibration signals generated by rolling element bearing with defects. Tribol Int 36(9):667–678

    Article  Google Scholar 

  2. Tandon N, Choudhury A (1997) An analytical model for the prediction of the vibration response of rolling element bearings due to a localized defect. J Sound Vib 205(3):275–292

    Article  Google Scholar 

  3. Antoni J, Randall RB (2002) Differential Diagnosis of gear and bearing faults. ASME Journal of Vibration and Acoustics 124(2):165–171

    Article  Google Scholar 

  4. Sun Q, Tang Y (2002) Singularity analysis using continuous wavelet transform for bearing fault diagnosis. Mech Syst Signal Process 16(6):1025–1041

    Article  Google Scholar 

  5. Mcfadden PD, Smith JD (1984) Modal for the vibration produced by a single point defect in a rolling element bearing. J Sound Vib 96(1):69–82

    Article  Google Scholar 

  6. Antoniadis I, Glossiotis G (2001) Cyclostationary analysis of rolling element bearing vibration signals. J Sound Vib 248(5):829–845

    Article  Google Scholar 

  7. Li L, Qu L (2003) Cyclic statistics in rolling bearing diagnosis. J Sound Vib 267(2):253–265

    Article  MathSciNet  Google Scholar 

  8. Randall RB, Antoni J, Chobsaard S (2001) The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals. Mech Syst Signal Process 15(5):945–962

    Article  Google Scholar 

  9. Shi DF, Wang WJ, Qu LS (2004) Defect Detection of Bearings Using Envelope Spectra of Wavelet Transform. ASME Journal of Vibration and Acoustics 126(4):567–573

    Article  Google Scholar 

  10. Li CJ, Ma J (1997) Wavelet decomposition of vibrations for detection of bearing-localized defects. NDT & E International 30(3):143–149

    Article  Google Scholar 

  11. Rubini R, Meneghetti U (2001) Application of the envelope and wavelet transform analysis for the diagnosis of incipient faults in ball bearings. Mech Syst Signal Processing 15(2):287–302

    Article  Google Scholar 

  12. Luo GY, Osypiw D, Irle M (2003) On line vibration analysis with fast continuous wavelet algorithm for condition monitoring of bearing. J Vib Control 9:931–947

    Article  MATH  Google Scholar 

  13. Mori K, Kasashima N, Yoshioka T, Ueno Y (1996) Prediction of spalling on a ball bearing by applying discrete wavelet transform to vibration signals. Wear 195:162–168

    Article  Google Scholar 

  14. Junsheng C, Dejie Y, Yu Y (2005) Time- energy density analysis based on wavelet transforms. NDT E Int 38(7):569–572

    Article  Google Scholar 

  15. Vass J, Cristalli C (2005) Optimization of morlet wavelet for mechanical fault diagnosis. 12th International Congress on Sound and Vibration (ICSV12).

  16. Kahaei MH, Torbatian M, Doshtan J (2006) Detection of bearing faults using Haar wavelets. IEICE Trans. Fundamental E 89-A(3):757–763

    Article  Google Scholar 

  17. Al-Raheem KF, Roy A, Ramachandran KP, Harrison DK, Grainger S (2007) Rolling element bearing fault diagnosis using Laplace wavelet envelope power spectrum. EURASIP Journal of Applied Signal Processing 2007(1):70–70

  18. Lin J, Qu L (2000) Feature extraction based on Morlet wavelet and its application for mechanical fault diagnosis. J sound vib 234(129):135–148

    Article  Google Scholar 

  19. Qiu H, Lee J, Lin J, Yu G (2003) Robust performance degradation assessment methods for enhanced rolling element bearing prognostics. Advanced Engineering Informatics 17(3–4):127–140

    Article  Google Scholar 

  20. Nikolaou NG, Antoniadis IA (2002) Demodulation of vibration signals generated by defects in rolling element bearings using complex shifted Morlet wavelets. Mech Syst Signal Process 16(4):677–694

    Article  Google Scholar 

  21. Dejie Y, Junsheng C, Yu Y (2007) Application of an impulse response wavelet to fault diagnosis of rolling bearings. Mech syst Signal Process 21(2):920–929

    Article  Google Scholar 

  22. Lin J, Zuo MJ, Fyfe KR (2004),Mechanical fault detection based on the wavelet de-noising technique. ASME Journal of Vibration and Acoustics 126:9–16

    Article  Google Scholar 

  23. Shao Y, Nezu K (2005) Design of mixture denoising for faulty bearing signals. J sound vibration 282:899–917

    Article  Google Scholar 

  24. Qiu H, Lee J, Lin J, Yu G (2006) Wavelet filter-based weak signature detection method and its application on rolling element bearing prognostics. J Sound Vib 289(4–5):1066–1090

    Article  Google Scholar 

  25. Abbasion S, Rafsanjani A, Farshidianfar A, Irani N (2007) Rolling element bearings multi-fault classification based on the wavelet denoising and support vector machine. Mech syst Signal Process 21:2933–2945

    Article  Google Scholar 

  26. Giaouris D, Finch JW (2007) Denoising using wavelets on electric derive applications. Electrical Power System Research, DOI 10.1016/j.epsr 2007.05.00410.1016/j.epsr 2007.05.004.

  27. Peng ZK, Chu FL (2004) Application of the wavelet transform in machine condition monitoring and fault diagnosis: a review with bibliography. Mech systems Signal Process 18:199–221

    Article  Google Scholar 

  28. Yang WX, Tse PW (2005) An advanced strategy for detecting impulses in mechanical signals. Transactions of the ASME 127:280–284

    Article  Google Scholar 

  29. Yang WX, Ren XM (2004) Detecting Impulses in mechanical signals by wavelets. EURASIP Journal on Applied Signal Processing 8:1156–1162

    Article  MATH  Google Scholar 

  30. Dimarogonas AD (1996) Vibration for Engineers, 2nd ed., Prentice Hall, Inc

  31. Mallat S (1998) A Wavelet Tool of Signal Processing, 2nd Edition, Academic Press

  32. CWRU, Bearing Data Center, seeded fault test data. http://www.eecs.case.edu/

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical and Industrial Eng., Caledonian College of Eng., Muscat, Oman

    Khalid F. Al-Raheem & K. P. Ramachandran

  2. School of Engineering Science and Design, Glasgow Caledonian University, Glasgow, Scotland, UK

    Asok Roy, D. K. Harrison & Steven Grainger

Authors
  1. Khalid F. Al-Raheem
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Asok Roy
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. K. P. Ramachandran
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. D. K. Harrison
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Steven Grainger
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Khalid F. Al-Raheem.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Al-Raheem, K.F., Roy, A., Ramachandran, K.P. et al. Rolling element bearing faults diagnosis based on autocorrelation of optimized: wavelet de-noising technique. Int J Adv Manuf Technol 40, 393–402 (2009). https://doi.org/10.1007/s00170-007-1330-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-007-1330-3

Keywords

Search

Navigation