Abstract
This paper presents a closed form equation for calculating production rate of a flexible manufacturing module (FMM) which operates under stochastic conditions, including random machining times, random part loading and unloading times, and random pallet transfer times. Random operational conditions may arise due to the randomness in the variety of parts introduced into the system. The FMM consists of two machines, one pallet handling system, and a loading/unloading robot. The model and the resulting closed form equations allow the FMM designers and operation engineers select the most appropriate parameters for the maximum production output rate.
Similar content being viewed by others
References
Abdelmalek F, Savsar M, Aldaihani M (2004) Simulation of tool change policies in a flexible manufacturing cell. WSEAS Trans Syst 7(3):2546–2552
Agnetis A, Alfieri A, Nicosia G (2003) Part batching and scheduling in a flexible cell to minimize setup costs. J Sched 6(1):87–108
Aldaihani M, Savsar M (2005) Stochastic modeling and analysis of a two machine flexible manufacturing cell. Comput Ind Eng 49:600–610
Buzacott JA, Yao DD (1986) Flexible manufacturing systems: a review of analytical models. Manage Sci 32:890–906
Chan D, Bedworth DD (1990) Design of a scheduling system for flexible manufacturing cells. Int J Prod Res 28:2037–2049
Cogun C, Savsar M (1996) Performance evaluation of a flexible manufacturing cell by computer simulation. Modeling Measurement & Control B 62(2):31–44
Farahmand K (2000) Using simulation to support implementation of flexible manufacturing cell. Winter Simulation Conference Proceedings, 2
Henneke MJ, Choi RH (1990) Evaluation of FMS parameters on overall system parameters. Comput Ind Eng 18:105–110
Hutchinson J, Leog K, Snade D, Ward P (1991) Scheduling approaches for random job shop flexible manufacturing systems. Int J Prod Res 29:1053–1067
Kelton WD, Sadowski RP, Sadowski DA (2002) Simulation with ARENA, Second edn. McGraw- Hill, New York, USA
Kim S, Park J, Leachman RC (2001) A supervisory control approach for execution control of an FMC. Int J Flex Manuf Sys 13(1):5–31
Koulamas CP (1992) A stochastic model for a machining cell with tool failure and tool replacement considerations. Comput Oper Res 19:717–729
Lashkari RS, Balakrishnan B, Dutta SP (2002) A multi-objective model for the allocation of pallets in a flexible manufacturing cell. Int J Ind Eng 9(3):287–300
Ratmirov VA, Snaksarev AM (1986) A mathematical model of a flexible manufacturing cell. Sov Eng Res 57(6):2–3
Savsar M, Cogun C (1993) Stochastic modeling and comparisons of two flexible manufacturing cells with single and double gripper robots. Int J Prod Res 31:633–645
Savsar M (2000) Reliability analysis of a flexible manufacturing cell. Reliab Eng Syst Saf 67:132–147
Savsar M. Production rate of a flexible manufacturing module. The 12th International Conference on Machine Design and Production, 5–8 September, 2006, Kusadasi, Turkey
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Savsar, M. Calculating production rate of a flexible manufacturing module. Int J Adv Manuf Technol 37, 760–769 (2008). https://doi.org/10.1007/s00170-007-1016-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-007-1016-x