Skip to main content
SpringerLink
Log in

Dynamic analysis of the 2-DOF planar parallel manipulator of a heavy duty hybrid machine tool

  • Original Article
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

This paper focuses on the dynamic characteristics of the two degree-of-freedom (DOF) planar parallel manipulator of a heavy duty hybrid machine tool. The Newton-Euler approach is employed to derive the inverse dynamic equation of the parallel manipulator. According to the motion planning of the cutting tool, dynamic simulation without cutting force is performed, and the ratio of the masses of counterweights to that of moving parts (not including the counterweight) is optimized. It demonstrates that the manipulator which is designed with over constraint can improve the dynamic behaviour. Furthermore, the cutting force model for face milling is introduced and the dynamic simulation with the dynamic cutting force is carried out. Simulation shows that the oscillation of cutting force is one cause of the vibration of the machine tool in the milling process. In the detailed design, some modification in the structure of the machine tool is made to suppress the vibration.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Dasgupta B, Mruthyunjaya TS (1998) Closed-form dynamic equations of the general Stewart platform through the Newton-Euler approach. Mech Mach Theory 33(7):993–1012

    Article  Google Scholar 

  2. Tsai LW (2000) Solving the inverse dynamics of a Stewart-Gough manipulator by the principle of virtual work. ASME J Mech Des 122(1):3–9

    Article  Google Scholar 

  3. Ting Y, Chen YS, Jar HC (2004) Modeling and control for a Gough-Stewart platform CNC machine. J Robot Syst 21(11):609–623

    Article  MATH  Google Scholar 

  4. Li JF, Wang JS, Liu XJ (2002) An efficient method for inverse dynamics of kinematically defective parallel platforms. J Robot Syst 19(2):45–61

    Article  MATH  Google Scholar 

  5. Choi HB, Konno A, Uchiyama M (2004) Inverse dynamic analysis of a 4-DOF parallel robot H4. Proceedings of the IEEE international conference on intelligent robots and systems, Sendai, Japan, 28 Sep–2 Oct 2004, pp 3501–3506

  6. Kock S, Schumacher W (1998) A parallel x-y manipulator with actuation redundancy for high-speed and active stiffness applications. Proceedings of the IEEE international conference on robotics and automation, Leuven, Belgium, 16–20 May 1998, pp 2295–2300

  7. Dong J, Yuan C, Stori JA, Ferreira PM (2004) Development of a high-speed 3-axis machine tool using a novel parallel-kinematics X-Y table. Int J Mach Tools Manuf 44(12):1355–1371

    Article  Google Scholar 

  8. Cheng H, Yiu YK, Li ZX (2003) Dynamics and control of redundantly actuated parallel manipulators. IEEE Trans Mechatronics 8(4):483–491

    Article  Google Scholar 

  9. Yiu YK, Cheng H, Xiong ZH, Liu GF, Li ZX (2001) On the dynamics of parallel manipulators. Proceedings of the IEEE international conference on robotics and automation, Seoul, Korea, 21–26 May 2001, pp 3766–3771

  10. Nakamura Y, Ghodoussi M (1989) Dynamics computation of closed-link robot mechanisms with nonredundant and redundant actuators. IEEE Trans Robot Autom 5(3):294–302

    Article  Google Scholar 

  11. Dasgupta B, Choudhury P (1999) A general strategy based on the Newton-Euler approach for the dynamic formulation of parallel manipulators. Mech Mach Theory 34(6):801–824

    Article  MATH  Google Scholar 

  12. Geike T, McPhee J (2003) Inverse dynamic analysis of parallel manipulators with full mobility. Mech Mach Theory 38(6):549–562

    Article  MATH  Google Scholar 

  13. Li YW, Wang JS, Wang LP, Liu XJ (2003) Inverse dynamics and simulation of a 3-dof spatial parallel manipulator. Proceedings of the IEEE international conference on robotics and automation, Taipei, Taiwan, 14–19 Sep 2003, pp 4092–4097

  14. Russo A, Sinatra R, Xi FF (2005) Static balancing of parallel robots. Mech Mach Theory 40(2):191–202

    Article  MATH  Google Scholar 

  15. Wang JG, Gosselin CM (2000) Static balancing of spatial four-degree-of-freedom parallel mechanisms. Mech Mach Theory 35(4):563–592

    Article  MATH  Google Scholar 

  16. Heikkala J (1995) Determining of cutting of cutting-force components in face milling. J Mater Process Technol 52(1):1–8

    Article  Google Scholar 

  17. Zheng HQ, Li XP, Wong YS, Nee AYC (1999) Theoretical modelling and simulation of cutting forces in face milling with cutter runout. Int J Mach Tools Manuf 39(12):2003–2018

    Article  Google Scholar 

  18. Kozak K, Ebert-Uphoff I, Singhose W (2004) Locally linearized dynamic analysis of parallel manipulators and application of input shaping to reduce vibrations. ASME J Mech Des 126(1):156–168

    Article  Google Scholar 

  19. Kang B, Mills JK (2001) Dynamic modeling and vibration control of high speed planar parallel manipulator. Proceedings of the IEEE international conference on intelligent robots and systems, Maui, HI, 29 Oct–3 Nov 2001, pp 1287–1292

Download references

Acknowledgements

This work is supported by the National Nature Science Foundation of China (Grant No.50305016), the 863 High-Tech Scheme (Grant No. 2004AA424120 and No. 2004AA424210), the “973” basic research project of China (Grant No. 2004CB318007) and the Scientific and Technical Essential Program (Grant No. 2001BA203B20).

Author information

Authors and Affiliations

  1. Manufacturing Engineering Institute, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing, 100084, People’s Republic of China

    Jun Wu, Jinsong Wang, Tiemin Li & Liping Wang

Authors
  1. Jun Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jinsong Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Tiemin Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Liping Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Jun Wu.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Wu, J., Wang, J., Li, T. et al. Dynamic analysis of the 2-DOF planar parallel manipulator of a heavy duty hybrid machine tool. Int J Adv Manuf Technol 34, 413–420 (2007). https://doi.org/10.1007/s00170-006-0605-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-006-0605-4

Keywords

Search

Navigation