Abstract
Briefly reviewed in this paper is the development of an expert system for the fixture set-up and for gearbox casings to be machined on machining centres. The set-up and fixture planning involves the definitions of operation sequence, workpiece orientation, locating type, locating surfaces, clamping type, and clamping surfaces. In this paper, the development of the system and a more detailed description of the locating solution is presented.
Similar content being viewed by others
References
Ma W, Rong Y (1999) Development of automated fixture planning systems. Int J Adv Manuf Technol 15:171–181
Cecil J (2001) A clamping design approach for automated fixture design. Int J Adv Manuf Technol 18:784–789
Kayacan MC, Celik SA (2003) Process planning system for prismatic parts. Integr Manuf Syst 14(2):75–86
Kaya N, Öztürk F (2003) The application of chip removal and frictional contact analysis for workpiece-fixture layout verification. Int J Adv Manuf Technol 21:411–419
Estrems M, Sánchez HT, Faura F (2003) Influence of fixtures on dimensional accuracy in machining processes. Int J Adv Manuf Technol 21:384–390
Thyer GE (1996) Computer numerical control of machine tools. Butterworth-Heinemann, Oxford
Stampfer M, Hodolic J (1998) Reduction of technological operations to particular cuts within a process-planning expert system for gearbox casings. Proceedings of the IEEE International Conference on Intelligent Engineering Systems (INES ’98), Vienna, Austria, pp 385–390
Nee JG (1998) Fundamentals of tool design. SME, Dearborn, MI
Ewersheim W, Neitzel R (1988) Ein expertensytem für die vorrichtungskonstruktion. Konstruktion 40:97101
Kettner H (1986) Maßbestimmung von aufnahmebolzen in vorrichtungen. Z Ind Fertigung 76:563–565
Milacic VR (1985) SAPT-Expert system for manufacturing process planning, Proceedings of the Winter Annual Meeting of the ASME, Florida, 1985
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Stampfer, M. Integrated set-up and fixture planning system for gearbox casings. Int J Adv Manuf Technol 26, 310–318 (2005). https://doi.org/10.1007/s00170-003-1997-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-003-1997-z