Abstract
This paper proposes a novel approach for standard component reuse in die design. In this approach, a standard component, or a subassembly of standard components, is represented by a unique name called the order name. The order name is derived by combining a manufacturer or supplier's name with the catalogue name used for ordering components from the supplier. In this system, the standard components are classified according to their generic information, i.e. their functions and the geometrical characteristics of their mating relationships with other components. When a user designs a particular die structure for a certain function, some design options and requirements are inputted. Using this information, the generic information of the standard component is derived and the order name is selected. The rules required for the selection procedures are stored in a knowledge-base shell. The shell is able to search data tables and retrieve parameters regarding the standard components. In this approach, the catalogue data and selection procedure are independent of the design system. It is concise and consistent with industry practice.
Similar content being viewed by others
References
Sivaloganathan S, Shahin TMM (1999) Design reuse: overview. P I Mech Eng B-J Eng 213(B1):pp. 641–654
Duffy AHB, Smith JS, Duffy SM (1998) Design reuse research: a computational perspective. In: Sivaloganathan S, Shahin TMM (eds) Proceedings of Engineering Design Conference '98 on Design Reuse, Professional Engineering Publishing Limited, London, June 1998, pp 43–56
Culley SJ (1999) Classification approaches for standard parts to aid design reuse. P I Mech Eng B-J Eng 213(B2):203–207
Culley SJ, Theobald G (1997) Dealing with standard components for knowledge intensive CAD. In: Mantyla M, Finger S, Tomiyama T (eds) Knowledge Intensive CAD, vol II. Chapman Hall, pp 235-255
FACE standard components for press dies, 1998.5–2000.4, MISUMI Corp.
Culley SJ (1998) Design reuse of standard parts. In: Sivaloganathan S, Shahin TMM (eds) Proceedings of Engineering Design Conference '98 on Design Reuse, Professional Engineering Publishing Limited, London, June 1998, pp 77–88
Culley SJ, Webber S (1992) The implementation requirements for electric standard component catalogues. P I Mech Eng B-J Eng 206(B1):253–260
Huang K, Ismail HS, Hon KKB (1996) Automated design of progressive dies. P I Mech Eng B-J Eng 210(B4):367–376
Cheok BT, Foong KY, Nee AYC (1996) An intelligent planning aid for the design of progressive dies. P I Mech Eng B-J Eng 210(B1):25–35, 1996
Cheok BT, Nee AYC (1998) Configuration of progressive dies. AI EDAM 12(5):405–418
Guide elements. V 01/92, V 02/94, AGATHON Ltd, Solothurn, Switzerland
Die set components. (1989) LEMPCO Industries Inc., Revised October 1989
Vogwell J, Culley SJ (1991) A strategy for selecting engineering components. P I Mech Eng B-J Eng 205(B1):11–17
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, W.Z., Wang, G.X., Cheok, B.T. et al. A functional approach for standard component reuse. Int J Adv Manuf Technol 22, 141–149 (2003). https://doi.org/10.1007/s00170-002-1455-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-002-1455-3