Advertisement

Structural and Multidisciplinary Optimization

, Volume 57, Issue 4, pp 1679–1694 | Cite as

Topology optimization for staged construction

  • Oded Amir
  • Yoram Mass
RESEARCH PAPER
  • 309 Downloads

Abstract

This paper presents a topology optimization formulation that accounts for construction in stages. Unlike in common topology optimization procedures, the loading and support conditions during construction are considered in addition to the final situation for which the structure is intended. The main purpose is to generate optimized layouts that can be built without temporary supports or scaffolds, as required for example in the design of segmental bridges. Another field of application which can benefit from this formulation is the design for manufacturing by layers, for which the staged construction is interpreted as a layer-by-layer fabrication process. By slicing the design domain and considering several fabrication stages, we obtain optimized designs that are influenced by the building direction and by the excessive deformation of unsupported layers. Demonstrative examples in 2-D and 3-D show that the amount of temporary scaffolds which are required for supporting during construction can be reduced significantly. Finally, we apply the layered approach to the design of hybrid void-support-solid layouts that can exhibit superior balance between performance and constructability compared to void-solid topologies.

Keywords

Topology optimization Staged construction Support structure 

Notes

Acknowledgements

The authors are thankful to Oded Rabinovitch for a fruitful discussion on the relations between additive manufacturing and staged construction. This work has been carried out as part of AATiD – Advanced Additive Titanium Development Consortium. The authors wish to thank all of AATiD members for numerous discussions and fruitful interactions. Additional funding was provided by the European Commission Research Executive Agency, grant agreement PCIG12-GA-2012-333647. This financial support is gratefully acknowledged.

References

  1. Allaire G, Dapogny C, Estevez R, Faure A, Michailidis G (2017) Structural optimization under overhang constraints imposed by additive manufacturing technologies. J Comput Phys . http://www.sciencedirect.com/science/article/pii/S0021999117307015
  2. Amir O, Aage N, Lazarov B (2014) On multigrid-CG for efficient topology optimization. Struct Multidiscip Optim 49(5):815–829.  https://doi.org/10.1007/s00158-013-1015-5 MathSciNetCrossRefGoogle Scholar
  3. Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struc Optim 1(4):193–202CrossRefGoogle Scholar
  4. Bendsøe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71(2):197–224MathSciNetCrossRefzbMATHGoogle Scholar
  5. Bendsøe MP, Sigmund O (1999) Material interpolation schemes in topology optimization. Arch Appl Mech 69(9-10):635–654CrossRefzbMATHGoogle Scholar
  6. Bendsøe MP, Sigmund O (2003) Topology optimization - theory methods and applications. Springer, BerlinzbMATHGoogle Scholar
  7. Bourdin B (2001) Filters in topology optimization. Int J Numer Methods Eng 50:2143–2158MathSciNetCrossRefzbMATHGoogle Scholar
  8. Brackett D, Ashcroft I, Hague R (2011) Topology optimization for additive manufacturing. In: Proceedings of the solid freeform fabrication symposium. University of Texas at Austin, Austin, pp 348–362Google Scholar
  9. Bruns TE, Tortorelli DA (2001) Topology optimization of non-linear elastic structures and compliant mechanisms. Comput Methods Appl Mech Eng 190:3443–3459CrossRefzbMATHGoogle Scholar
  10. Childs T, Hauser C, Badrossamay M (2005) Selective laser sintering (melting) of stainless and tool steel powders: experiments and modelling. Proc Inst Mech Eng B J Eng Manuf 219(4):339–357CrossRefGoogle Scholar
  11. Deaton J, Grandhi R (2014) A survey of structural and multidisciplinary continuum topology optimization: post 2000. Struct Multidiscip Optim 49(1):1–38.  10.1007/s00158-013-0956-z MathSciNetCrossRefGoogle Scholar
  12. Fleck N, Deshpande V, Ashby M (2010) Micro-architectured materials: past, present and future. Proc Inst Mech Eng B J Eng Manuf 466(2121):2495–2516Google Scholar
  13. Gaynor AT (2015) Topology optimization algorithms for additive manufacturing. PhD thesis, The Johns Hopkins UniversityGoogle Scholar
  14. Gaynor AT, Guest JK (2016) Topology optimization considering overhang constraints: eliminating sacrificial support material in additive manufacturing through design. Struct Multidiscip Optim 54(5):1157–1172MathSciNetCrossRefGoogle Scholar
  15. Gibson I, Rosen D, Stucker B (2015) Additive manufacturing technologies: 3D printing rapid prototyping and direct digital manufacturing. Springer, New YorkCrossRefGoogle Scholar
  16. Guest JK, Prévost JH, Belytschko T (2004) Achieving minimum length scale in topology optimization using nodal design variables and projection functions. Int J Numer Methods Eng 61:238–254MathSciNetCrossRefzbMATHGoogle Scholar
  17. Guo X, Zhang W, Zhong W (2014) Doing topology optimization explicitly and geometricallya new moving morphable components based framework. J Appl Mech 81(8):081,009CrossRefGoogle Scholar
  18. Guo X, Zhou J, Zhang W, Du Z, Liu C, Liu Y (2017) Self-supporting structure design in additive manufacturing through explicit topology optimization. Computer Methods in Applied Mechanics and Engineering. ElsevierGoogle Scholar
  19. Hashin Z, Shtrikman S (1963) A variational approach to the theory of the elastic behaviour of multiphase materials. J Mech Phys Solids 11(2):127–140MathSciNetCrossRefzbMATHGoogle Scholar
  20. Kolossov S, Boillat E, Glardon R, Fischer P, Locher M (2004) 3d fe simulation for temperature evolution in the selective laser sintering process. Int J Mach Tools Manuf 44(2):117–123CrossRefGoogle Scholar
  21. Langelaar M (2016) Topology optimization of 3D self-supporting structures for additive manufacturing. Addit Manuf 12:60–70CrossRefGoogle Scholar
  22. Langelaar M (2017) An additive manufacturing filter for topology optimization of print-ready designs. Struct Multidiscip Optim 55(3):871–883MathSciNetCrossRefGoogle Scholar
  23. Lazarov BS, Wang F, Sigmund O (2016) Length scale and manufacturability in density-based topology optimization. Arch Appl Mech 86(1-2):189–218CrossRefGoogle Scholar
  24. Leary M, Merli L, Torti F, Mazur M, Brandt M (2014) Optimal topology for additive manufacture: a method for enabling additive manufacture of support-free optimal structures. Mater Des 63:678–690CrossRefGoogle Scholar
  25. Mass Y, Amir O (2017) Topology optimization for additive manufacturing: Accounting for overhang limitations using a virtual skeleton. Addit Manuf 18(Supplement C):58–73.  10.1016/j.addma.2017.08.001  10.1016/j.addma.2017.08.001. http://www.sciencedirect.com/science/article/pii/S2214860417301045 CrossRefGoogle Scholar
  26. Matsumoto M, Shiomi M, Osakada K, Abe F (2002) Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing. Int J Mach Tools Manuf 42(1):61–67CrossRefGoogle Scholar
  27. Mirzendehdel AM, Suresh K (2016) Support structure constrained topology optimization for additive manufacturing. Comput Aided Des 81:1–13CrossRefGoogle Scholar
  28. Mlejnek H (1992) Some aspects of the genesis of structures. Struc Optim 5(1-2):64–69CrossRefGoogle Scholar
  29. Qian X (2017) Undercut and overhang angle control in topology optimization: a density gradient based integral approach. International Journal for Numerical Methods in Engineering, Wiley Online LibraryGoogle Scholar
  30. Sigmund O, Bendsøe MP (2004) Topology optimization: from airplanes to nano-optics. In: Stubkjær K, Kortenbach T (eds) Bridging from technology to society. Technical University of Denmark. Lyngby, DenmarkGoogle Scholar
  31. Sigmund O, Maute K (2013) Topology optimization approaches. Struct Multidiscip Optim 48(6):1031–1055MathSciNetCrossRefGoogle Scholar
  32. Sigmund O, Torquato S (1997) Design of materials with extreme thermal expansion using a three-phase topology optimization method. J Mech Phys Solids 45(6):1037–1067MathSciNetCrossRefGoogle Scholar
  33. Svanberg K (1987) The method of moving asymptotes - a new method for structural optimization. Int J Numer Methods Eng 24:359–373MathSciNetCrossRefzbMATHGoogle Scholar
  34. Thomas D (2009) The development of design rules for selective laser melting. PhD thesis, University of WalesGoogle Scholar
  35. Wang F, Lazarov BS, Sigmund O (2011) On projection methods, convergence and robust formulations in topology optimization. Struct Multidiscip Optim 43:767–784CrossRefzbMATHGoogle Scholar
  36. Wu J, Aage N, Westermann R, Sigmund O (2016) Infill optimization for additive manufacturing–approaching bone-like porous structures. arXiv:160804366
  37. Xu S, Cai Y, Cheng G (2010) Volume preserving nonlinear density filter based on heaviside functions. Struct Multidiscip Optim 41(4):495–505.  10.1007/s00158-009-0452-7 MathSciNetCrossRefzbMATHGoogle Scholar
  38. Zaeh MF, Branner G (2010) Investigations on residual stresses and deformations in selective laser melting. Prod Eng 4(1):35–45CrossRefGoogle Scholar
  39. Zhang W, Chen J, Zhu X, Zhou J, Xue D, Lei X, Guo X (2017) Explicit three dimensional topology optimization via moving morphable void (mmv) approach. Comput Methods Appl Mech Eng 322:590–614MathSciNetCrossRefGoogle Scholar
  40. Zhou M, Rozvany G (1991) The coc algorithm, part ii: topological, geometrical and generalized shape optimization. Comput Methods Appl Mech Eng 89(1):309–336CrossRefGoogle Scholar
  41. Zhu J-H, Zhang W-H, Xia L (2016) Topology optimization in aircraft and aerospace structures design. Arch Comput Methods Eng 23(4):595–622MathSciNetCrossRefzbMATHGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany 2017

Authors and Affiliations

  1. 1.Faculty of Civil and Environmental EngineeringTechnion – Israel Institute of TechnologyHaifaIsrael

Personalised recommendations