Abstract
A non-linear programming method is developed for optimization of inelastic cylindrical shells with internal ring supports. The shells under consideration are subjected to internal pressure loading and axial tension. The material of shells is a composite which is considered as an anisotropic inelastic material obeying the yield condition suggested by Lance and Robinson. Taking geometrical non/linearity of the structure into account optimal locations of internal ring supports are determined so that the cost function attains its minimum value. A particular problem of minimization of the mean deflection of the shell with weakened singular cross sections is treated in a greater detail.
Similar content being viewed by others
References
Åkersson B, Olhoff N (1988) Minimum stiffness of optimally located supports for maximum value of beam eigenfrequencies. J Sound Vib 120:457–463
Anderson T (2005) Fracture mechanics. CRC, Boca Raton
Bojczuk D, Mroz Z (1998) On optimal design of supports in beam and frame structures. Struct Optim 16(1):47–57
Broberg KB (1999) Cracks and fracture. Academic, New York
Broek D (1988) The practical use of fracture mechanics. Kluwer, Dordrecht
Chen FL, Yu TX (1999) Dynamic behavior of a clamped plastic beam with cracks at supporting ends under impact. Trans ASME J Press Vessel Technol 121:406–412
Cinquini C, Kouam M (1983) Optimal plastic design of stiffened shells. Int J Solids Struct 19(9):773–783
Daniel IM, Ishai O (1994) Engineering mechanics of composite materials. Oxford Univ Press, Oxford
Garstecki A, Mroz Z (1987) Optimal design of supports of elastic structures subjected to loads and initial distortions. J Struct Mech 15:47–68
Jones R (1999) Mechanics of composite materials. Taylor and Francis, Philadelphia
Kaliszky S, Logo J (2003) Layout optimization of rigid-plastic structures under high intensity, short-time dynamic pressure. Mech Des Struct Mach 31(2):131–150
Kaliszky S, Logo J (2006) Optimal design of elasto-plastic structures subjected to normal and extremal loads. Comput Struct 84:1770–1779
Kumar S, Petroski HJ (1985) Plastic response to impact of a simply supported beam with a stable crack. Int J Impact Eng 3(1):27–40
Lance RH, Robinson DN (1973) Plastic analysis of filled reinforced circular cylindrical shells. Int J Mech Sci 15(1):65–79
Lellep J (1984) Optimal location of additional supports for plastic cylindrical shells subjected to impulsive loading. Int J Non-Linear Mech 19(4):323–330
Lellep J (1985a) Optimal location of additional supports for a geometrically non-linear plastic cylindrical shell. Prikl Meh 1:60–66
Lellep J (1985b) Parametrical optimization of plastic cylindrical shells in the post-yield range. Int J Eng Sci 23(12):1289–1303
Lellep J, Mürk A (2008) Optimization of inelastic annular plates with cracks. Struct Multidiscipl Optim 35(1):1–10
Lellep J, Puman E (2007) Optimization of inelastic conical shells with cracks. Struct Multidiscipl Optim 33(3):189–197
Lepik Ü (1978) Optimal design of beams with minimum compliance. Int J Non-Linear Mech 13:33–42
Mroz Z, Lekszycki T (1981) Optimal support reaction in elastic frame structures. Comput Struct 14:179–185
Mroz Z, Rozvany GIN (1975) Optimal design of structures with variable support positions. J Optim Theory Appl 15:85–101
Olhoff N, Åkesson B (1991) Minimum stiffness of optimally located supports for minimum value of column buckling loads. J Struct Optim 3:163–175
Petroski HJ (1981) Simple static and dynamic models for the cracked elastic beam. Int J Fract 17:R71–R76
Prager W, Rozvany GIN (1975) Plastic design of beams: optimal locations of supports and steps in yield moment. Int J Mech Sci 17(10):627–631
Rozvany GIN (1976) Optimal design of flexural systems. Pergamon, Oxford
Szelag D, Mroz Z (1978) Optimal design of elastic beams with unspecified support positions. ZAMM 58:501–510
Yu TX, Chen FL (2000) Failure of plastic structures under intense dynamic loading: modes, criteria and thresholds. Int J Mech Sci 42:1537–1554
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lellep, J., Paltsepp, A. Optimization of inelastic cylindrical shells with internal supports. Struct Multidisc Optim 41, 841–852 (2010). https://doi.org/10.1007/s00158-009-0465-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-009-0465-2