Abstract
Many optimization and coordination methods for multidisciplinary design optimization (MDO) have been proposed in the last three decades. Suitable MDO benchmark problems for testing and comparing these methods are few however. This article presents a new MDO benchmark problem based on the design optimization of an ADXL150 type lateral capacitive micro-accelerometer. The behavioral models describe structural and dynamic effects, as well as electrostatic and amplification circuit contributions. Models for important performance indicators such as sensitivity, range, noise, and footprint area are presented. Geometric and functional constraints are included in these models to enforce proper functioning of the device. The developed models are analytical, and therefore highly suitable for benchmark and educational purposes. Four different problem decompositions are suggested for four design cases, each of which can be used for testing MDO coordination algorithms. As a reference, results for an all-in-one implementation, and a number of augmented Lagrangian coordination algorithms are given.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agte JS, Sobieszczanski-Sobieski J, Sandusky RR Jr (1999) Supersonic business jet design through bi-level integrated system synthesis. In: Proceedings of the world aviation conference, San Fransisco, CA, MCB Press, SAE paper 1999-01-5622
Alexandrov NM, Lewis RM (1999) Comparative properties of collaborative optimization and other approaches to MDO. In: ASMO UK/ISSMO conference on engineering design optimization. MCB University Press, Bradford, pp 39–46
Analog Devices Inc (1998) Adxl150/adxl250 data sheet
Balling RJ, Sobieszczanski-Sobieski J (1996) Optimization of coupled systems: a critical overview of approaches. AIAA J 34(1):6–17
Balling RJ, Wilkinson CA (1997) Execution of multidisciplinary design optimization approaches on common test problems. AIAA J 35(1):178–186
Boser BE, Howe RT (1995) Surface micromachined accelerometers. In: Proceedings of the IEEE custom integrated circuit conference, pp 337–344
Braun RD (1996) Collaborative optimization: an architecture for large-scale distributed design. PhD thesis, Stanford University
Cho Y, Pisano AP, Howe RT (1994) Viscous damping model for laterally oscillating microstructures. Journal of Microelectromechanical Systems 3(2):81–87
Cramer EJ, Dennis JE, Frank PD, Lewis RM, Shubin GR (1994) Problem formulation for multidisciplinary optimization. SIAM J Optim 4(4):754–776
DeMiguel AV, Murray W (2006) A local convergence analysis of bilevel decomposition algorithms. Optimization and Engineering 7(2):99–133
Haftka RT, Watson LT (2005) Multidisciplinary design optimization with quasiseparable subsystems. Optimization and Engineering 6(1):9–20
Leondes CT (2006) MEMS/NEMS handbook: techniques and applications. Design methods in MEMS/NEMS, vol 1. Springer, New York
Mathworks (2008) Matlab user guide, version 7. Mathworks, Natick
Michalek J, Papalambros PY (2006) BB-ATC: analytical target cascading using branch and bound for mixed integer nonlinear programming. In: Proceedings of the ASME design engineering technical conferences, Philadelphia, PA
Michelena N, Kim HM, Papalambros PY (1999) A system partitioning and optimization approach to target cascading. In: Proceedings of the 12th international conference on engineering design, Munich, Germany
Mukherjee T (2003) MEMS design and verification. In: Proceedings of the IEEE international test conference, Charlotte, NC
Mukherjee T, Iyer S, Fedder GK (1998) Optimization-based synthesis of microresonators. Sens Actuators A Phys 70(1–2):118–127
Mukherjee T, Zhou Y, Fedder GK (1999) Automated optimal synthesis of microaccelerometers. In: Proceeding of the 12th annual IEEE international micro electro mechanical system conference, Orlando, FL, pp 326–331
Padula SL, Alexandrov NM, Green LL (1996) MDO test suite at nasa langley research center. In: Proceedings of the 6th AIAA/USAF/NASA/ISSMO multidisciplinary analysis and optimization conference, Bellevue, WA. AIAA paper 1996-4028
Papila M, Haftka RT, Nishida T, Sheplak M (2006) Piezoresistive microphone design pareto optimization: tradeoff between sensitivity and noise floor. Journal of Microelectromechanical Systems 15(6):1632–1643
Pedersen CBW, Seshia AA (2004) On the optimization of compliant force amplifier mechanisms for surface micromachined resonant accelerometers. J Micromechanics Microengineering 14:1281–1293
Perez RE, Liu HHT, Behdinan K (2004) Evaluation of multidisciplinary optimization approaches for aircraft conceptual design. In: Proceedings of the 10th AIAA/ISSMO multidisciplinary analysis and optimization conference, Albany, NY. AIAA paper 2004-4537
Samuels H (1996) Single- and dual-axis micromachined accelerometers adxl150 & adxl250: new complete low-noise 50-g accelerometers. Analog Dialogue 30(4)
Senturia SF (2001) Microsystem design. Springer
Sobieszczanski-Sobieski J, James BB, Dovi AR (1983) Structural optimization by multilevel decomposition. AIAA paper 1983-0832
Sobieszczanski-Sobieski J, Altus TD, Phillips M, Sandusky RR Jr (2003) Bilevel integrated system synthesis for concurrent and distributed processing. AIAA J 41(10):1996–2003
Tosserams S, Etman LFP, Papalambros PY, Rooda JE (2006) An augmented Lagrangian relaxation for analytical target cascading using the alternating direction method of multipliers. Struct Multidiscipl Optim 31(3):176–189
Tosserams S, Etman LFP, Rooda JE (2007) An augmented Lagrangian decomposition method for quasi-separable problems in MDO. Struct Multidiscipl Optim 34(3):211–227
Tosserams S, Etman LFP, Rooda JE (2008) Augmented Lagrangian coordination for distributed optimal design in MDO. Int J Numer Methods Eng 73(13):1885–1910
Tosserams S, Etman LFP, Rooda JE (2009a) Block-separable linking constraints in augmented Lagrangian coordination. Struct Multidiscipl Optim 37(5):521–527
Tosserams S, Etman LFP, Rooda JE (2009b) A classification of methods for distributed system optimization based on formulation structure. Struct Multidiscipl Optim. doi:10.1007/s00158-008-0347-z
University of Buffalo (2009) Multidisciplinary optimization and engineering laboratory. http://www.eng.buffalo.edu/Research/MODEL/. Accessed 25 March 2009
Veijola T, Pursula A, Råback P (2005) Extending the validity of squeezed-film damper models with elongations of surface dimensions. J Micromechanics Microengineering 15:1624–1636
Yi SI, Shin MK, Park GJ (2008) Comparison of MDO methods with mathematical examples. Struct Multidiscipl Optim 35(5):391–402
Yuan W, Chang H, Li W, Ma B (2006) Application of an optimization methodology for multidisciplinary system design of microgyroscopes. Microsyst Technol 12(4):315–323
Zhou Y (1998) Layout synthesis of accelerometers. Master’s thesis, Carnegie Mellon University
Author information
Authors and Affiliations
Corresponding author
Additional information
This work is funded by MicroNed, grant number 10005898.
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
Tosserams, S., Etman, L.F.P. & Rooda, J.E. A micro-accelerometer MDO benchmark problem. Struct Multidisc Optim 41, 255–275 (2010). https://doi.org/10.1007/s00158-009-0422-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-009-0422-0