Abstract
This paper investigates the design optimisation of a fuel flow vent hole (FFVH) located in the wing pivot fitting (WPF) of an F-111 aircraft assuming a damage tolerance design philosophy. The design of the vent hole shape is undertaken considering the basic durability based design objectives of stress, residual (fracture) strength, and fatigue life. Initially, a stress based optimised shape is determined. Damage tolerance based design optimisation is then undertaken to determine the shape of the cutout so as to maximise its residual strength and fatigue life. For stress optimisation, the problem is analysed using the gradient-less biological algorithm and the gradient-based nonlinear programming methods. The optimum designs predicted by the two fundamentally different optimisation algorithms agree well. The optimum shapes of the vent hole are subsequently determined considering residual strength and fatigue life as the distinct design objectives in the presence of numerous 3D cracks located along the vent hole boundary. A number of crack cases are considered to investigate how the crack size affects the optimal shapes. A semi-analytical method is employed for computation of the stress intensity factors (SIF), and an analytical crack closure model is subsequently used to evaluate the fatigue life. The 3D biological algorithm is used for designing the cutout profiles that optimise residual strength and fatigue life of the component. An improved residual strength/fatigue life (depending on the optimisation objective) is achieved for the optimal designs. The variability in SIF/fatigue life around the cutout boundary is reduced, thereby making the shape more evenly fracture/fatigue critical. The vent hole shapes optimised for stress, residual strength, and fatigue life are different from each other for a given nature and size of the flaws. This emphasises the need to consider residual strength and/or fatigue life as the explicit design objective. The durability based optimal vent hole shapes depend on the initial and final crack sizes. It is also shown that a damage tolerance optimisation additionally produces a reduced weight WPF component, which is highly desirable for aerospace industries. The design space near the ‘optimal’ region is found to be flat. This allows us to achieve a considerable enhancement in fatigue performance without precisely identifying the local/global optimum solution, and also enables us to select a reduced weight ‘near optimal’ design rather than the precise optimal shape.
Similar content being viewed by others
References
Aerospaceweb.org. General dynamics, F-111 Aardvark, Medium Tactical/ Strategic Bomber. http://www.aerospaceweb.org/aircraft/bomber/f111/ Accessed 5 June 2005
Atluri SN, Sampath SG, Tong P (ed) (1991) Structural integrity of aging airplanes. Springer
Barter SA, Clayton JQ, Clark G (1993) Aspects of fatigue affecting the design and maintenance of modern military aircraft. Int J Fatigue 15(3):325–332
Broydon CG (1970) The convergence of class of double rank minimization algorithms, parts I and II. J Inst Math Appl 6:76–90
Burchill M, McDonald M, Heller M, Watters K (2002) Shape optimisation of fatigue prone holes in the Wing Pivot Fitting of the RAAFs F-111 aircraft. In: Proceedings of the third Australasian congress on applied mechanics, Sydney, Australia, pp. 129–134
Cherkayev AV, Grabovsky Y, Movchan AB, Serkov SK (1998) The cavity of the optimal shape under the shear stresses. Int J Solids Struct 35(33):4391–4410
Das R (2006) Structural optimisation: damage tolerance based formulation and implementation. PhD thesis, Monash University
Das R, Jones R, Peng D (2005a) Optimal shape design with fatigue life as design constraint using a 3D biological method. In: Proceedings of the 11th international conference on fracture, Turin, Italy
Das R, Jones R, Xie YM (2005b) Design of structures for optimal static strength using ESO. Eng Fail Anal 12(1):61–80
Das R, Jones R, Peng D (2006) Optimisation of damage tolerant structures using a 3D biological algorithm. Eng Fail Anal 13(3):362–379
Das R, Jones R, Chandra S (2007) Damage tolerance based shape design of a stringer cutout using evolutionary structural optimisation. Eng Fail Anal 14(1):118–137
Elber W (1971) The significance of fatigue crack closure. In: Damage tolerance in aircraft structures—ASTM STP 486, pp. 230–242
Fanni M, Schnack E, Grunwald J (1994) Shape optimization of dynamically loaded machine parts. Int J Press Vessels Piping 59(1–3):281–297
Fletcher R (1970) A new approach to variable metric algorithms. Comput J 13:317–322
Fletcher R, Reeves CM (1964) Function minimization by conjugate gradients. Comput J 7(2):149–154
Goldfarb D (1970) A family of variable metric methods derived by variational means. Math Comput 24:23–36
Grunwald J, Schnack E (1997) Fatigue model for shape optimization. Struct Optim 14(1):36–44
Heller M, McDonald M, Burchill M, Watters KC (2002a) Shape optimization of critical stiffener runouts for F-111 airframe life extension. Fatigue Fract Eng Materials Struct 25(2):151–172
Heller M, McDonald M, Burchill M, Watters KC (2002b) F-111 airframe life extension through rework shape optimisation of critical features in the wing pivot fitting. In: Proceedings of the 6th joint FAA/DoD/NASA aging aircraft conference, San Francisco, CA
Heller M, Braemar R, Waldman W, Evans R, McDonald M, Kaye R (2005) Local Shape Optimization for Airframe Life Extension. In: Proceedings of the 6th world congress of structural and multidisciplinary optimization, in Rio de Janeiro, Brazil, June
Heywood RB (1945) Photo-elasticity and design problems (part II). Aircr Eng 17:226–228
Hudson CM, Hardrath HF (1963) Investigation of the effects of variable amplitude loadings on fatigue crack propagation patterns. NASA, Report No. TN-D-1803
Jones R, Peng D, Pitt S, Wallbrink C (2004) Weight functions, CTOD, and related solutions for cracks at notches. Eng Fail Anal 11(1):79–114
Kaye R, Heller M (2000) Investigation of shape optimisation for the design of life extension options for an F/A-18 airframe FS 470 bulkhead. J Strain Anal 35(6):493–505
Kaye R, Heller M (2002) Through-thickness shape optimisation of bonded repairs and lap-joints. Int J Adhes Adhes 22:7–21
Kaye R, Heller M (2005) Through-thickness shape optimisation of typical double lap-joints including effects of differential thermal contraction during curing. Int J Adhes Adhes 25(3):227–238
Kristensen ES, Madsen NF (1976) On the optimum shape of fillets in plates subjected to multiple in plane loading cases. Int J Numer Methods Eng 10:1007–1019
Lu PC (1996) Shape optimization of a connecting rod with fatigue life constraint. Int J Mater Prod Technol 11(5–6):357–370
Mattheck CHL (1991) Effect of loading on the optimized shape of a kinked bar. Materialwiss Werkstofftech 22(6):236–244
Mattheck C, Burkhardt S, Erb D (1990) Shape optimization of engineering components by adaptive biological growth. In: Lecture notes in engineering—Proceedings of the international conference on engineering optimization in design process, in Karlsruhe, Germany. Springer, Berlin, pp. 15–24
Mattheck C, Erb D, Bethge K, Begemann U (1992) Three-dimensional shape optimization of a bar with a rectangular hole. Fatigue Fract Eng Mater Struct 15(4):347–351
Newman JC (1976) Crack-opening displacements in center-crack compact, and crack-line wedge-loaded specimens. NASA, Report No. TN D-8268
Newman JC (1984) A crack-opening stress equation for fatigue crack growth. Int J Fract 24:131–135
Newman JC (1992) FASTRAN-II—a fatigue crack growth structural analysis program. NASA Langley Research Center, Report No. NASA Technical Memorandum 104159
Nishioka T, Atluri SN (1983) Analytical solutions for embedded elliptical cracks, and finite element alternating method for elliptical surface cracks, subjected to arbitrary loadings. Eng Fract Mech 17(3):247–268
Pedersen P, Laursen CL (1983) Design for minimum stress concentration by finite elements and linear programming. J Struct Mech 10:375–391
Redmond G (2000) F-111 aircraft cold temperature proof testing at RAAF. RAAF Base Amberley, Queensland, Australia
Schnack E (1979) An optimization procedure for stress concentrations by the finite element technique. Int J Numer Methods Eng 14:124–151
Shanno DF (1970) Conditioning of quasi-Newton methods for function minimization. Math Comput 24:647–656
Vanderplaats GN (1984) Numerical optimization techniques for engineering design: with application. McGraw-Hill, New York
Vanderplaats GN (2000) Very large scale optimization. In: Proceedings of the of AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, in Long Beach, CA. AIAA
Vigdergauz SB, Cherkayev AV (1986) A hole in a plate, optimal for its biaxial extension-compression. J Appl Math Methods 50(3):401–404
Watters K (1997) Strain surveys of fuel flow vent hole number 13 and stiffener runout number 2 in the F-111 Wing Pivot Fitting for a range of rework shapes. DSTO—Aeronautical and Maritime Research Laboratory, Melbourne, Australia
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Das, R., Jones, R. Damage tolerance based design optimisation of a fuel flow vent hole in an aircraft structure. Struct Multidisc Optim 38, 245–265 (2009). https://doi.org/10.1007/s00158-008-0278-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-008-0278-8