Abstract
This paper deals with the design of compliant mechanisms in a continuum-based finite-element representation. Because the displacements of mechanisms are intrinsically large, the geometric nonlinearity is essential for designing such mechanisms. However, the consideration of the geometric nonlinearity may cause some instability in topology optimization. The problem is in the analysis part but not in the optimization part. To alleviate the analysis problem and eventually stabilize the optimization process, this paper proposes to apply the Levenberg–Marquardt method to the nonlinear analysis of compliant mechanisms.
References
Ananthasuresh GK, Kota S, Kikuchi N (1994) Strategies for systematic synthesis of compliant MEMS. Dyn Syst Control 2:677–686
Bendsøe MP, Sigmund O (2003) Topology optimization—theory, methods, and applications. Springer, Berlin Heidelberg New York
Bruns TE, Tortorelli DA (2001) Topology optimization of non-linear elastic structures and compliant mechanisms. Comput Methods Appl Mech Eng 190(26–27):3443–3459
Bruns TE, Sigmund O, Tortorelli DA (2002) Numerical methods for the topology optimization of structures that exhibit snap-through. Int J Numer Methods Eng 55:1215–1237
Bruns TE, Tortorelli DA (2003) An element removal and reintroduction strategy for the topology optimization of structures and compliant mechanisms. Int J Numer Methods Eng 57:1413–1430
Buhl T, Pedersen CBW, Sigmund O (2000) Stiffness design of geometrically nonlinear structures using topology optimization Struct Multidisc Optim 19(2):93–104
Conn AR, Gould NIM, Toint PL (2000) Trust-region methods. SIAM, Philadelphia
Crisfield MA (1997) Non-linear finite element analysis of solid and structure, vol 1. Wiley, New York
Kawamoto A (2005) Path-generation of articulated mechanisms by shape and topology variations in non-linear truss representation. Int J Numer Methods Eng 64(12):1557–1574
Levenberg K (1944) A method for the solution of certain problems in least squares. Q Appl Math 2:164–168
Marquardt D (1963) An algorithm for least-squares estimation of nonlinear parameters. SIAM J Appl Math 11:431–441
Nielsen HB (1999) Damping parameter in Marquardt’s method. Technical Report IMM-REP-1999-05. http://www.imm.dtu.dk/∼hbn/publ/
Pedersen CBW, Buhl T, Sigmund O (2001) Topology synthesis of large-displacement compliant mechanisms. Int J Numer Methods Eng 50(12):2683–2705
Sigmund O (1997) On the design of compliant mechanisms using topology optimization. Mech Struct Mach 25(4):493–524
Svanberg K (1987) The method of moving asymptotes—a new method for structural optimization. Int J Numer Methods Eng 24(2):359–373
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kawamoto, A. Stabilization of geometrically nonlinear topology optimization by the Levenberg–Marquardt method. Struct Multidisc Optim 37, 429–433 (2009). https://doi.org/10.1007/s00158-008-0236-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-008-0236-5