Abstract
Based on the analyses of the mechanical features of rotary kiln with multi-supports, a general mechanical model for indeterminate kiln with variable bending rigidities, arbitrary supports and complex loads is established. From this model, the equations of the rotational angle and the deformation are deduced, the general matrix and procedure are developed. The correlation between the roller forces and axis deflections of no. 2 rotary kiln is derived. To improve kiln performance by kiln axis alignment, taking roller forces equilibrium and relative axis deflection minimum as the optimization goal, considering the fuzzy constraints of axis alignment, the fuzzy optimization model of kiln axis alignment is set up. The optimization model is solved with the max–min approach. The results show that fuzzy optimization alignment of rotary kiln can make kiln axis as straight as possible and can distribute kiln loads equally.
Similar content being viewed by others
References
Andersen NK (1986) Mechanical monitoring and maintenance of rotary kilns and coolers. ZKG int 39(8):447–456
Andersen NK (1992) The choice of optimal methodology and procedure for the correct alignment of rotary kilns and parameters influencing such choice. ZKG int 45(1):7–10
Broberg DW (1995) FEA and FMA reveal weak spots in rotary kiln designs. World Cem 26(5):70–75
Gebhart WM (1989) Kiln alignment: A perspective. Rock Prod 92(10):42–47
Gebhart WM (2001) Kiln alignment analysis: an overview of the direct method. Global Cement and Lime Magazine (11):21–24
Geiger KA (1995) Available kiln seal technologies. World cem 26(12):18–22
Huang HZ, Gu YK, Du XP (2006) An interactive fuzzy multi-objective optimization method for engineering design. Eng Appl Artif Intell 19(5):451–460
Ross J (1994) Shell deformation. World Cem 25(12):20–26
Teskey WF, Bayly DA, Martell HE (1993) Use of laser targeting in precise machinery surveys. J Surv Eng 119(2):59–70
Xiao YG (2004) The mechanical property research of rotary kiln contact system with multi-supports and parameters optimization. PhD Thesis, School of Mechanical and Electrical Engineering, Central South University, Changsha (in Chinese).
Xiao YG, Liu YL, Li XL et al (2002) Research on portable system for monitoring and diagnosing mechanical running condition of rotary kiln. Instrument Technique and Sensor 21(10):21–23 (in Chinese)
Xiao YG, Liu YL, Li XL, Lei XM (2006) Finite element method of calculating reaction forces of large kiln shell with multi-supports. J Cent South Univ 37(2):300–305
Zhang Y (2001) Increasing plant availability by mechanical checking of the cement rotary kiln axis. Journal of Wuhan University of Technology 16(3):76–78
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xiao, Y., Li, X. & Chen, X. General solution to kiln support reactions and multi-objective fuzzy optimization of kiln axis alignment. Struct Multidisc Optim 36, 319–327 (2008). https://doi.org/10.1007/s00158-007-0164-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0164-9