Abstract
Composite stiffened panel optimization is typically a mixed discrete-continuous design problem constrained by buckling and material strength. Previous work applied a bi-level optimization strategy to the problem by decomposing the mixed problem to continuous and discrete levels to reduce the optimization search space and satisfy manufacturing constraints. A fast-running optimization package, VICONOPT, was used at the continuous optimization level where the buckling analysis was accurately and effectively performed. However, the discrete level was manually adjusted to satisfy laminate design rules. This paper develops the strategy to application on continuously long aircraft wing panels subjected to compression and lateral pressure loading. The beam-column approach used to account for lateral loading for analysis during optimization is reported. A genetic algorithm is newly developed and applied to the discrete level for automated selection of laminated designs. The results that are presented show at least 13% weight saving compared with an existing datum design.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Anderson MS, Stroud WJ (1979) General panel sizing computer code and its application to composite structural panels. AIAA J 17:892–897
Anderson MS, Williams FW, Wright CJ (1983) Buckling and vibration of any prismatic assembly of shear and compression loaded anisotropic plates with an arbitrary supporting structure. Int J Mech Sci 25:585–596
Bushnell D (1987) PANDA2—program for minimum weight design of stiffened, composite, locally buckled panels. Comput Struct 25:469–605
Cheung YK (1976) Finite strip methods in structural analysis. Pergamon, Oxford
Dawe DJ (1977) Finite strip buckling analysis of curved plate assemblies under biaxial loading. Int J Solids Struct 13:1141–1155
Giles GL, Anderson MS (1972) Effects of eccentricities and lateral pressure on the design of stiffened compression panels. NASA Langley, Hampton, VA
Goldberg DE (1989) Genetic algorithms in search, optimization and machine learning. Addison-Wesley, Boston
Graves-Smith TR, Sridharan SA (1978) Finite strip method for the buckling of plate structures under arbitrary loading. Int J Mech Sci 20:685–693
Herencia JE, Weaver PM, Friswell MI (2006) Local optimisation of long anisotropic laminated fibre composite panels with T shape stiffeners. AIAA-06-2171-CP. AIAA, Reston, VA
Kassapoglou C (1997) Simultaneous cost and weight minimization of composite-stiffened panels under compression and shear. Compos Part A Appl Sci Manuf 28:419–435
Kollár LP (2002) Buckling of unidirectionally loaded composite plates with one free and one rotationally restrained unloaded edge. J Struct Eng 128:1202–1211
Kollár LP, Springer GS (2003) Mechanics of Composite Structures. Cambridge University Press, Cambridge
Le Riche R, Haftka RT (1993) Optimization of laminate stacking sequence for buckling load maximisation by genetic algorithm. AIAA J 31:951–956
Liu B, Haftka RT, Akgün MA (2000) Two-level composite wing structural optimization using response surfaces. Struct Multidiscipl Optim 20:87–96
Liu W, Butler R, Mileham AR, Green AJ (2005) Optimum design, experimental testing and post-buckling analysis of thick composite stiffened panels. AIAA-05-1826-CP. AIAA, Reston, VA
Liu W, Butler R, Mileham AR, Green AJ (2006) Bi-level optimization and post-buckling of highly strained composite stiffened panels. AIAA J 44:2562–2570
Liu W, Butler R (2007) Optimum buckling design of composite wing cover panels with manufacturing constraints. AIAA-07-2215-CP. AIAA, Reston, VA
Nagendra S, Haftka, RT, Gürdal Z (1993) Design of a blade stiffened composite panel by a genetic algorithm. AIAA-93-1584-CP. AIAA, Reston, VA
Nagendra S, Jestin D, Gürdal Z, Haftka RT, Watson LT (1996) Improved genetic algorithm for the design of stiffened composite panels. Comput Struct 58:543–555
Niu MCY (1992) Composite airframe structures: practical design information and data. Conmilit, Hong Kong, pp 440
Timoshenko SP, Gere JM (1963) Theory of elastic stability. McGraw-Hill, London
Vanderplaats GN (1973) CONMIN—a FORTRAN program for constrained function minimization. User’s manual, NASA TM X-62,282, NASA Ames, CA
Vitali R, Park O, Haftka RT, Sankar BV, Rose CA (2002) Structural optimization of a hat-stiffened panel using response surfaces. J Aircr 39:158–166
Williams FW, Kennedy D, Butler R, Anderson MS (1991) Viconopt: program for exact vibration and buckling analysis or design of prismatic plate assemblies. AIAA J 29:1927–1928
Wittrick WH, Williams FW (1971) A general algorithm for computing natural frequencies of elastic structures. Q J Mech Appl Math 24:263–284
Wittrick WH, Williams FW (1973) An algorithm for computing critical buckling loads of elastic structures. J Struct Mech 1:497–518
Wittrick WH, Williams FW (1974) Buckling and vibration of anisotropic of isotropic plate assemblies under combined loading. Int J Mech Sci 16:209–239
Yamazaki K (1996) Two-level optimization technique of composite laminate panels by genetic algorithms. AIAA-96-1539-CP. AIAA, Reston, VA
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, W., Butler, R. & Kim, H.A. Optimization of composite stiffened panels subject to compression and lateral pressure using a bi-level approach. Struct Multidisc Optim 36, 235–245 (2008). https://doi.org/10.1007/s00158-007-0156-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0156-9