Abstract
The beam cross-section optimization problems have been very important as beams are widely used as efficient load-carrying structural components. Most of the earlier investigations focus on the dimension and shape optimization or on the topology optimization along the axial direction. An important problem in beam section design is to find the location and direction of stiffeners, for the introduction of a stiffener in a closed beam section may result in a topologically different configuration from the original; the existing section shape optimization theory cannot be used. The purpose of this paper is to formulate a section topology optimization technique based on an anisotropic beam theory considering warping of sections and coupling among deformations. The formulation and corresponding solving method for the topology optimization of beam cross-sections are proposed. In formulating the topology optimization problem, the minimum averaged compliance of the beam is taken as objective, and the material density of every element is used as design variable. The schemes to determine the rigidity matrix of the cross-sections and the sensitivity analysis are presented. Several kinds of topologies of the cross-section under different load conditions are given, and the effect of load condition on the optimum topology is analyzed.
Similar content being viewed by others
References
Banichuk NV, Karihaloo BL (1976) Minimum-weight design of multipurpose cylindrical bars. Int J Solids Struct 12:267–273
Banichuk NV, Ragnedda F, Serra M (2002) Optimum shapes of bar cross-sections. Struct Multidisc Optim 23:222–232
Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1:193–202
Bendsøe MP, Sigmund O (1999) Material interpolation schemes in topology optimization solid mechanics. Ing -Arch 69:635–654
Bensoe MP, Kikuchi N (1988) Generating optimal topologies in structural design using a homogenization method. Comput Methods Appl Mech Eng 71:197–224
Dems K (1980) Multiparameter shape optimization of elastic bars in torsion. Int J Numer Methods Eng 15:1517–1539
Frecker MI, Ananthasuresh GK, Nishiwaki S, Kikuchi N, Kota S (1997) Topological synthesis of compliant mechanisms using multi-criteria optimization. J Mech Des ASME 119:238–245
Giavotto V, Borri M, Mantegazza P, Ghiringhelli G (1983) Anisotropic beam theory and applications. Comput Struct 16:403–413
Gracia L, Doblare M (1988) Shape optimization of elastic orthotropic shafts under torsion by using boundary elements. Comput Struct 30:1281–1291
Kim YY, Kim TS (2000) Topology optimization of beam cross sections. Int J Solids Struct 37:477–493
Mota SC, Rodrigues HC, Oliveira F, LM, Haug EJ (1984) Optimization of the geometry of shafts using boundary elements. J Mech Transm Autom Des 106:199–202
Rietz A (2001) Sufficiency of a finite exponent in SIMP (power law) methods. Struct Multidiscipl Optim 21:159–163
Rosen DW, Peter TJ (1996) The role of topology in engineering design research. Springer, London, pp 81–98
Sakata S, Ashida F, Zako M (2002) Topology and detail geometry optimization for beam structures using homotopy modeling. Comput Methods Appl Mech Eng 191:4279–4293
Suzuki K, Kikuchi N (1991) A homogenization method for shape and topology optimization. Comp Methods Appl Mech Eng 93:291–318
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, S., An, X. & Jia, H. Topology optimization of beam cross-section considering warping deformation. Struct Multidisc Optim 35, 403–411 (2008). https://doi.org/10.1007/s00158-007-0138-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-007-0138-y