Skip to main content
SpringerLink
Log in

Topology optimization of electrostatically actuated microsystems

  • Research Paper
  • Published:
Structural and Multidisciplinary Optimization Aims and scope Submit manuscript

Abstract

This study addresses the design of electrostatically actuated microelectromechanical systems by topology optimization. The layout of the structure and the electrode are simultaneously optimized. A novel, continuous, material-based description of the interface between the structural and electrostatic domains is presented that allows the optimization of the interface topology. The resulting topology optimization problem is solved by a gradient-based algorithm. The electromechanical system response is determined by a coupled high-fidelity finite element model and a staggered solution procedure. An adjoint formulation of the coupled electromechanical design sensitivity analysis is introduced, and the global sensitivity equations are solved by a staggered method. The proposed topology optimization method is applied to the design of mechanisms. The optimization results show the significant advantages of varying the interface topology and the layout of the electrode versus conventional approaches optimizing the structural layout only.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. abdalla03 Abdalla MM, Reddy CK, Faris W, Gürdal Z (2003) Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage. In: AIAA/ASME/AHS/AISC 43rd conference on structures, structural dynamics and materials, Norfolk, VA

  2. bend89 Bendsøe MP (1989) Optimal shape design as a material distribution problem. Struct Optim 1:193–202

  3. bend02 Bendsøe MP, Sigmund O (2002) Topology optimization, theory, methods and applications. Springer, Berlin Heidelberg New York

  4. bochobza04 Bochobza-Degani O, Nemirovsky Y (2004) Experimental verification of a design methodology for torsion actuators based on a rapid pull-in solver. J Microelectromech Syst 13(1):121–130

  5. bourdin03 Bourdin B, Chambolle A (2003) Design-dependent loads in topology optimization. ESAIM Control Optimisat Calculus Variat 9:19–48

  6. brun98 Bruns TE, Tortorelli DA (1998) Topology optimization of geometrically nonlinear structures and compliant mechanisms. In: Proceedings of the 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, St. Louis, MO, pp 1874–1882

  7. bustillo98 Bustillo JM, Howe RT, Muller RS (1998) Surface micromachining for microelectromechanical systems. Proc IEEE 86(8):1552–1574

  8. byun2 Byun JK, Park IH, Hahn SY (2002) Topology optimization of electrostatic actuator using design sensitivity. IEEE Trans Magnet 38(2):1053–1056

  9. bcchen01 Chen B-C, Kikuchi N (2001) Topology optimization with design-dependent loads. Finite Elements Anal Des 37:57–70

  10. chen04 Chen K-S, Ou K-S, Li L-M (2004) Development and accuracy assessment of simplified electromechanical coupling solvers for mems applications. J Micromech Microeng 14:159–169

  11. du04a Du J, Olhoff N (2004) Topological optimization of continuum structures with design-dependent surface loading—Part I: new computational approach for 2d problems. Struct Multidisc Optim 27:151–165

  12. du04b Du J, Olhoff N (2004) Topological optimization of continuum structures with design-dependent surface loading—Part II: algorithm and examples for 3d problems. Struct Multidisc Optim 27:166–177

  13. esch01 Eschenauer HA, Olhoff N (2001) Topology optimization of continuum structures: a review. Appl Mech Rev 54(4):331–389

  14. farh98 Farhat C, Degand C, Koobus B, Lesoinne M (1998) Torsional springs for two-dimensional dynamic unstructured fluid meshes. Comput Methods Appl Mech Eng 163:231–245

  15. farh98c Farhat C, Lesoinne M, LeTallec P (1998) Load and motion transfer algorithms for fluid/structure interaction problems with non-matching discrete interfaces: momentum and energy conservation, optimal discretization and application to aeroelasticity. Comput Methods Appl Mech Eng 157:95–114

  16. giun98 Giunta AA, Sobieszczanski-Sobieski J (1998) Progress towards using sensitivity derivatives in a high-fidelity aeroelastic analysis of a supersonic transport. In: AIAA 98–4763, 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, St. Louis, MO, September 1998, pp 441–453

  17. hammer00 Hammer VB, Olhoff N (2000) Topology optimization of continuum structures subjected to pressure loading. Struct Multidisc Optim 19:85–92

  18. johnsonA94 Johnson AA, Tezduyar TE (1994) Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces. Comput Methods Appl Mech Eng 119:73–94

  19. maute04 Maute K, Allen M (2004) Conceptual design of aeroelastic structures by topology optimization. Struct Multidisc Optim 27:27–42

  20. maut00a Maute K, Lesoinne M, Farhat C (2000) Optimization of aeroelastic systems using coupled analytical sensitivities. In: AIAA 2000–0560, 38th Aerospace Science Meeting and Exhibit, Reno, NV, 10–13 January 2000

  21. maute03b Maute K, Frangopol D (2003) Reliability-based design of mems mechanisms by topology optimization. Comput Struct 81:813–824

  22. maut03a Maute K, Nikbay M, Farhat C (2003) Sensitivity analysis and design optimization of three-dimensional non-linear aeroelastic systems by the adjoint method. Int J Numer Methods Eng 56(6):911–933

  23. mili91 Militello C, Felippa C (1991) The first andes elements: 9-dof plate bending triangles. Comput Methods Appl Mech Eng 91:217–246

  24. pede01 Pedersen CBW, Buhl T, Sigmund O (2001) Topology optimization of large displacement compliant mechanism. Int J Numer Methods Eng 50:2683–2705

  25. rodri95 Rodriques H, Fernandes P (1995) A material based model for topology optimization of thermoelastic structures. Int J Numer Methods Eng 38:1951–1965

  26. senturia92 Senturia S, Harris R, Johnson B, Kim S, Nabors K, Shulman M, White J (1992) A computer-aided design system for microelectromechanical systems (memcad). J Microelectromech Syst 1(1):3–13

  27. shaul04 Shaul D, Sumner T (2004) Estimating accuracy of electrostatic finite element models. Communications Numer Methods Eng 20:313–321

  28. shi95 Shi F, Ramesh P, Mukherjee S (1995) Simulation methods for micro-electro-mechanical structures (MEMS) with application to a microtweezer. Comput Struct 56:769–783

  29. sigm94 Sigmund O (1994) Design of material structures using topology optimization. PhD thesis, Danish Center for Applied Mathematics and Mechanics, Technical University of Denmark, Lyngby, Denmark

  30. sigm97 Sigmund O (1997) On the design of compliant mechanisms. Mech Struct Mach 25:493–524

  31. sigm98 Sigmund O (1998) Topology optimization in multiphysics problems. In: AIAA 98–4905, Proceedings of the 7th AIAA/USAF/NASA/ISSMO symposium on multidisciplinary analysis and optimization, St.Louis, MO, pp 1492–1500

  32. sigm01a Sigmund O (2001) Design of multiphysics actuators using topology optimization—Part I: One-material structures. Comput Methods Appl Mech Eng 190(49–50):6577–6604

  33. sigm01b Sigmund O (2001) Design of multiphysics actuators using topology optimization—Part II: Two-material structures. Comput Methods Appl Mech Eng 190(49–50):6605–6627

  34. sobi90 Sobieszczanski-Sobieski J (1990) Sensitivity of complex, internally coupled systems. AIAA J 28:153–160

  35. svan87 Svanberg K (1987) The method of moving asymptotes—a new method for structural optimization. Int J Numer Methods Eng 24:359–373

  36. yin02 Yin L, Ananthasuresh GK (2002) A novel topology design scheme for the multi-physics problems of electro-thermally actuated compliant micromechanisms. Sensors Actuators A 97–98:599–609

  37. younis03 Younis M, Abdel-Rahman E, Nayfeh A (2003) A reduced-order model for electrically actuated microbeam-based mems. J Microelectromech Syst 12(5):672–680

  38. zhou91 Zhou M, Rozvany GIN (1991) The coc algorithm, Part II: Topological, geometrical and generalized shape optimization. Comput Methods Appl Mecha Eng 89(1–3):309–336

  39. zhulin00 Zhulin VI, Owen SJ, Ostergard DF (2000) Finite element based electrostatic-structural coupled analysis with automated mesh morphing. In: Technical Proceedings of the 2000 international conference on modeling and simulation of microsystems, pp 501–504. Computational Publications, Boston

Download references

Author information

Authors and Affiliations

  1. Dept. of Mechanical Engineering, Villanova University, 800 Lancaster Avenue, Villanova, PA, 19085, USA

    M. Raulli

  2. Dept. of Aerospace Engineering Sciences, University of Colorado, Campus Box 429, Boulder, CO, 80309, USA

    K. Maute

Authors
  1. M. Raulli
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. K. Maute
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to K. Maute.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Raulli, M., Maute, K. Topology optimization of electrostatically actuated microsystems. Struct Multidisc Optim 30, 342–359 (2005). https://doi.org/10.1007/s00158-005-0531-3

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00158-005-0531-3

Keywords

Search

Navigation