Abstract
To improve the flame retardancy of wood, an ammonium phytate-based flame retardant (APFR) system was prepared via the reaction between phytic acid and urea without organic solvent purification. Loblolly pine (Pinus taeda) wood was impregnated by the APFR (APFR-W), and the flame retardancy and thermal degradation behaviors of APFR-W were studied. Compared with untreated wood (W), the total heat release and total smoke production of APFR-W (weight% gain = 27.8 ± 0.7%) were decreased by 81.5% and 43.2%, respectively. During decomposition, APFR produced noncombustible gases and phosphoric acid, which diluted the combustible volatiles and facilitated the charring reaction of cellulose. The excess urea in the system melted to absorb heat and might act as a solvent or medium to catalyze the phosphorylation of cellulose, and accordingly reduced the formation of levoglucosan and further increased the char yield. An intumescent structure was formed to protect the underlying wood. More importantly, analysis of the chemical structure of char residue indicated that a graphitized char with nitrogen and phosphorus doping was formed. This char layer acted as a highly thermally stable barrier and effectively impeded the transfer of heat and mass, leading to improved flame retardancy and smoke suppression performance.
Similar content being viewed by others
References
Alongi J, Carletto RA, Di Blasio A et al (2013) DNA: a novel, green, natural flame retardant and suppressant for cotton. J Mater Chem A 1:4779–4785. https://doi.org/10.1039/c3ta00107e
Brack W, Heine B, Birkhold F et al (2014) Kinetic modeling of urea decomposition based on systematic thermogravimetric analyses of urea and its most important by-products. Chem Eng Sci 106:1–8. https://doi.org/10.1016/j.ces.2013.11.013
Browne FL (1958) Theories of the combustion of wood and its control. Department of Agriculture Forest Service, Madsion, Wisconsin
Burnard MD, Kutnar A (2015) Wood and human stress in the built indoor environment: a review. Wood Sci Technol 49:969–986. https://doi.org/10.1007/s00226-015-0747-3
Canan C, Cruz FTL, Delaroza F et al (2011) Studies on the extraction and purification of phytic acid from rice bran. J Food Compos Anal 24:1057–1063. https://doi.org/10.1016/j.jfca.2010.12.014
Chen Z, Zhang S, Ding M et al (2021) Construction of a phytic acid–silica system in Wood for highly efficient flame retardancy and smoke suppression. Mater (Basel) 14:4164. https://doi.org/10.3390/ma14154164
Choi CH, Park SH, Woo SI (2012) Binary and ternary doping of nitrogen, boron, and phosphorus into carbon for enhancing electrochemical oxygen reduction activity. ACS Nano 6:7084–7091. https://doi.org/10.1021/nn3021234
Costes L, Laoutid F, Brohez S et al (2017) Phytic acid–lignin combination: a simple and efficient route for enhancing thermal and flame retardant properties of polylactide. Eur Polym J 94:270–285. https://doi.org/10.1016/j.eurpolymj.2017.07.018
Daneluti ALM, Matos J, do R (2013) Study of thermal behavior of phytic acid. Brazilian J Pharm Sci 49:275–283. https://doi.org/10.1590/S1984-82502013000200009
Dawson CJ, Hilton J (2011) Fertiliser availability in a resource-limited world: production and recycling of nitrogen and phosphorus. Food Policy 36:S14–S22. https://doi.org/10.1016/j.foodpol.2010.11.012
Dong Y, Hou L, Wu P (2020) Exploring the diffusion behavior of urea aqueous solution in the viscose film by ATR-FTIR spectroscopy. Cellulose 27:2403–2415. https://doi.org/10.1007/s10570-020-02997-y
Feng Y, He C, Wen Y et al (2018) Superior flame retardancy and smoke suppression of epoxy-based composites with phosphorus/nitrogen co-doped graphene. J Hazard Mater 346:140–151. https://doi.org/10.1016/j.jhazmat.2017.12.019
Feng Y, Zhou Y, Li D et al (2017) A plant-based reactive ammonium phytate for use as a flame-retardant for cotton fabric. Carbohydr Polym 175:636–644. https://doi.org/10.1016/j.carbpol.2017.06.129
Gebke S, Thümmler K, Sonnier R et al (2020) Flame retardancy of wood fiber materials using phosphorus-modified wheat starch. Molecules 25. https://doi.org/10.3390/molecules25020335
Graf E, Eaton JW (1990) Antioxidant functions of phytic acid. Free Radic Biol Med 118:61–69. https://doi.org/10.1016/0891-5849(90)90146-A
Hassan MA, Kozlowski R, Obidzinski B (2008) New fire-protective intumescent coatings for wood. J Appl Polym Sci 110:83–90. https://doi.org/10.1002/app.28518
Hendrix JE, Bostic JE, Olson ES, Barker RH (1970) Pyrolysis and combustion of cellulose. I. Effects of triphenyl phosphate in the presence of nitrogenous bases. J Appl Polym Sci 14:1701–1723. https://doi.org/10.1002/app.1970.070140705
Hill CAS (2006) Wood Modification. Chemical, Thermal and Other Processes
Horowitz HH, Metzger G (1963) A New Analysis of Thermogravimetric traces. Anal Chem 35:1464–1468. https://doi.org/10.1021/ac60203a013
Jiang J, Li J, Gao Q (2015) Effect of flame retardant treatment on dimensional stability and thermal degradation of wood. Constr Build Mater 75:74–81. https://doi.org/10.1016/j.conbuildmat.2014.10.037
Johns WE, Niazi KA (1980) Effect of pH and buffering capacity of wood on the relation time of urea formaldehyde resin. Wood Fiber Sci 12:255–263
Kandola BK, Horrocks AR, Price D, Coleman GV (1996) Flame-retardant treatments of cellulose and their influence on the mechanism of cellulose pyrolysis. J Macromol Sci Part C 36:721–794. https://doi.org/10.1080/15321799608014859
Li L, Chen Z, Lu J et al (2021) Combustion Behavior and Thermal Degradation Properties of Wood impregnated with intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and glycerol. ACS Omega 6:3921–3930. https://doi.org/10.1021/acsomega.0c05778
Li Y, Wang Z, Li L et al (2016) Preparation of nitrogen-and phosphorous co-doped carbon microspheres and their superior performance as anode in sodium-ion batteries. Carbon N Y 99:556–563. https://doi.org/10.1016/j.carbon.2015.12.066
Lim MT, Phan A, Roddy D, Harvey A (2015) Technologies for measurement and mitigation of particulate emissions from domestic combustion of biomass: a review. Renew Sustain Energy Rev 49:574–584. https://doi.org/10.1016/j.rser.2015.04.090
Lin D, Hu C, Chen H et al (2018) Microporous N,P-Codoped Graphitic Nanosheets as an efficient Electrocatalyst for Oxygen reduction in whole pH range for Energy Conversion and Biosensing dissolved Oxygen. Chem - A Eur J 24:18487–18493. https://doi.org/10.1002/chem.201802040
Liu X, Zhang Q, Cheng B et al (2018) Durable flame retardant cellulosic fibers modified with novel, facile and efficient phytic acid-based finishing agent. Cellulose 25:799–811. https://doi.org/10.1007/s10570-017-1550-0
Lowden L, Hull T (2013) Flammability behaviour of wood and a review of the methods for its reduction. Fire Sci Rev 2:4. https://doi.org/10.1186/2193-0414-2-4
Lu J, Jiang P, Chen Z et al (2021) Flame retardancy, thermal stability, and hygroscopicity of wood materials modified with melamine and amino trimethylene phosphonic acid. Constr Build Mater 267:121042. https://doi.org/10.1016/j.conbuildmat.2020.121042
Mačiulaitis R, Jefimovas A, Zdanevičius P (2012) Research of natural wood combustion and charring processes. J Civ Eng Manag 18:631–641. https://doi.org/10.3846/13923730.2012.720935
Nam S, Condon BD, Parikh DV et al (2011) Effect of urea additive on the thermal decomposition of greige cotton nonwoven fabric treated with diammonium phosphate. Polym Degrad Stab 96:2010–2018. https://doi.org/10.1016/j.polymdegradstab.2011.08.014
Nam S, Condon BD, White RH et al (2012) Effect of urea additive on the thermal decomposition kinetics of flame retardant greige cotton nonwoven fabric. Polym Degrad Stab 97:738–746. https://doi.org/10.1016/j.polymdegradstab.2012.02.008
Nuessle AC, Ford FM, Hall WP, Lippert AL (1956) Some aspects of the cellulose-phosphate-urea reaction. Text Res J 26:32–39. https://doi.org/10.1177/004051755602600105
Park M-S, Lee J, Lee J-W et al (2013) Tuning the surface chemistry of natural graphite anode by H3PO4 and H3BO3 treatments for improving electrochemical and thermal properties. Carbon N Y 62:278–287. https://doi.org/10.1016/j.carbon.2013.05.065
Puziy AM, Poddubnaya OI, Socha RP et al (2008) XPS and NMR studies of phosphoric acid activated carbons. Carbon N Y 46:2113–2123. https://doi.org/10.1016/j.carbon.2008.09.010
Puziy AM, Poddubnaya OI, Ziatdinov AM (2006) On the chemical structure of phosphorus compounds in phosphoric acid-activated carbon. Appl Surf Sci 252:8036–8038. https://doi.org/10.1016/j.apsusc.2005.10.044
Sandoval S, Kumar N, Oro-Solé J et al (2016) Tuning the nature of nitrogen atoms in N-containing reduced graphene oxide. Carbon N Y 96:594–602. https://doi.org/10.1016/j.carbon.2015.09.085
Saurel D, Orayech B, Xiao B et al (2018) From charge storage mechanism to performance: a Roadmap toward High Specific Energy Sodium-Ion Batteries through Carbon Anode optimization. Adv Energy Mater 8:1–33. https://doi.org/10.1002/aenm.201703268
Schartel B, Hull TR (2007) Development of fire-retarded materials—interpretation of cone calorimeter data. Fire Mater 31:327–354. https://doi.org/10.1002/fam.949
Shree R, Naik RB, Gunasekaran G (2022) Phytic acid based novel optically transparent intumescent fire-retardant coating for protection of combustible substrates with retention of aesthetic appearance. J Coat Technol Res 19:509–525. https://doi.org/10.1007/s11998-021-00537-2
Slopiecka K, Bartocci P, Fantozzi F (2012) Thermogravimetric analysis and kinetic study of poplar wood pyrolysis. Appl Energy 97:491–497. https://doi.org/10.1016/j.apenergy.2011.12.056
Soula M, Samyn F, Duquesne S, Landry V (2021) Innovative polyelectrolyte treatment to flame-retard wood. Polym (Basel) 13:1–16. https://doi.org/10.3390/polym13172884
Stec A, Hull R (2010) Fire toxicity. Woodhead Publishing Limited
Sykam K, Försth M, Sas G et al (2021) Phytic acid: a bio-based flame retardant for cotton and wool fabrics. Ind Crops Prod 164:113349. https://doi.org/10.1016/j.indcrop.2021.113349
van der Veen I, de Boer J (2012) Phosphorus flame retardants: Properties, production, environmental occurrence, toxicity and analysis. Chemosphere 88:1119–1153. https://doi.org/10.1016/j.chemosphere.2012.03.067
Velencoso MM, Battig A, Markwart JC et al (2018) Molecular firefighting—how modern Phosphorus Chemistry can help solve the challenge of Flame Retardancy. Angew Chemie - Int Ed 57:10450–10467. https://doi.org/10.1002/anie.201711735
Wang K, Meng D, Wang S et al (2022) Impregnation of phytic acid into the delignified wood to realize excellent flame retardant. Ind Crops Prod 176:114364. https://doi.org/10.1016/j.indcrop.2021.114364
Wang R, Li Y, Wang Y, Fang Z (2020) Phosphorus-doped graphite felt allowing stabilized electrochemical interface and hierarchical pore structure for redox flow battery. Appl Energy 261:114369. https://doi.org/10.1016/j.apenergy.2019.114369
Xiong Z, Zhang Y, Du X et al (2019) Green and Scalable Fabrication of Core-Shell Biobased Flame Retardants for reducing flammability of Polylactic Acid. ACS Sustain Chem Eng 7:8954–8963. https://doi.org/10.1021/acssuschemeng.9b01016
Xu W, Zhang B, Wang X et al (2018) The flame retardancy and smoke suppression effect of a hybrid containing CuMoO4 modified reduced graphene oxide/layered double hydroxide on epoxy resin. J Hazard Mater 343:364–375. https://doi.org/10.1016/j.jhazmat.2017.09.057
Yan L, Xu Z, Wang X (2017) Influence of nano-silica on the flame retardancy and smoke suppression properties of transparent intumescent fire-retardant coatings. Prog Org Coatings 112:319–329. https://doi.org/10.1016/j.porgcoat.2017.07.017
Yang W, Tawiah B, Yu C et al (2018) Manufacturing, mechanical and flame retardant properties of poly(lactic acid) biocomposites based on calcium magnesium phytate and carbon nanotubes. Compos Part A Appl Sci Manuf 110:227–236. https://doi.org/10.1016/j.compositesa.2018.04.027
Yoo S, Kelley SS, Tilotta DC, Park S (2018) Structural characterization of Loblolly Pine Derived Biochar by X-ray diffraction and Electron Energy loss spectroscopy. ACS Sustain Chem Eng 6:2621–2629. https://doi.org/10.1021/acssuschemeng.7b04119
Yuan B, Xing W, Hu Y et al (2016) Boron/phosphorus doping for retarding the oxidation of reduced graphene oxide. Carbon N Y 101:152–158. https://doi.org/10.1016/j.carbon.2016.01.080
Zhang L, Yi D, Hao J, Gao M (2021) One-step treated wood by using natural source phytic acid and uracil for enhanced mechanical properties and flame retardancy. Polym Adv Technol 32:1176–1186. https://doi.org/10.1002/pat.5165
Acknowledgements
The study was financially supported by the Fundamental Research Funds for the Central Universities in China (No. 2018ZY04, 2019JQ03013).
Author information
Authors and Affiliations
Contributions
All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflicts of interest.
Supporting information
Modulus of rupture (MOR) of untreated and untreated wood (Fig. S1), thermal decomposition behavior of APFR treated wood (APFR-W) and ethanol-washed APFR treated wood (Fig. S2), distribution of APFR in wood (Fig. S3), and fire retardancy tests for different wood samples (Fig. S4).
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, S., Yang, W., Yang, T. et al. Thermal degradation, flame retardancy, and char analysis of ammonium phytate-based flame retardant treated loblolly pine wood. Eur. J. Wood Prod. 81, 957–971 (2023). https://doi.org/10.1007/s00107-023-01927-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-023-01927-6