Abstract
The bamboo-wood composite container floor (BWCCF) plays an increasingly important role in the transportation area in recent years. However, the conventional mechanical testing methods are conducted in a time-consuming and resource-wasting way. Therefore, this study is aimed to provide a frugal and high-efficiency method to predict the concentrated load of BWCCF, by comparing models with two sets of parameters. First, three artificial neural network (ANN) models were developed by taking the characteristic parameters of the end face extracted by image processing as input and concentrated load as output. Then, the other three ANN models were presented by taking the vertical density profile (VDP) as input. Of the six models, the two ANN models constructed using all characteristic parameters of cross and vertical sections and all VDP parameters had the strongest generalization. The mean absolute percentage errors were determined as 3.393 and 6.196%, respectively, and the absolute percentage errors were all within 10.000%. The result indicates that the designed model has the potential to be a useful, reliable and effective tool for predicting concentrated load.
Similar content being viewed by others
References
Caselles V, Kimmel R, Sapiro G (1997) Geodesic active contours. Int J Comput Vis 22:61–79. https://doi.org/10.1023/A:1007979827043
Chen F, Deng J, Li X et al (2017) Effect of laminated structure design on the mechanical properties of bamboo-wood hybrid laminated veneer lumber. Eur J Wood Prod 75:439–448. https://doi.org/10.1007/s00107-016-1080-8
Chung MJ, Wang SY (2019) Physical and mechanical properties of composites made from bamboo and woody wastes in Taiwan. J Wood Sci 65:1–10. https://doi.org/10.1186/s10086-019-1833-1
Cohen A, Daubechies I, Feauveau J-C (1992) Biorthogonal bases of compactly supported wavelets. Commun Pure Appl Math 45:485–560. https://doi.org/10.1002/cpa.3160450502
Daubechles I (2006) Orthonormal bases of compactly supported wavelets. In: Fundamental papers in wavelet theory. Princeton University Press, pp 564–652. https://doi.org/10.1515/9781400827268.564
Delhommelle J (2018) Machine learning. Mol Simul 44:865–865. https://doi.org/10.1080/08927022.2018.1471777
Fernandes A, Lousada J, Morais J et al (2013) Comparison between neural networks and partial least squares for intra-growth ring wood density measurement with hyperspectral imaging. Comput Electron Agric 94:71–81. https://doi.org/10.1016/j.compag.2013.03.010
Fernández FG, De Palacios P, Esteban LG et al (2012) Prediction of MOR and MOE of structural plywood board using an artificial neural network and comparison with a multivariate regression model. Compos Part B Eng 43:3528–3533. https://doi.org/10.1016/j.compositesb.2011.11.054
Forestry Industry Standards of the People’s Republic of China (LY) (2016) Method for determination of the vertical density profile of wood-based panels. LY/T 2718-2016. State for Adm People’s Republic of China. http://hbba.sacinfo.org.cn/stdDetail/161938349521030ff2650ae4351e6447
Gamage N, Setunge S (2015) Modelling of vertical density profile of particleboard, manufactured from hardwood sawmill residue. Wood Mater Sci Eng 10:157–167. https://doi.org/10.1080/17480272.2014.923043
Guo N, Chen H, Zhang P, Zuo H (2016) The research of parallel to the grain compression performance test of laminated glued bamboo-wood composites. Teh Vjesn Tech Gaz 23:129–135. https://doi.org/10.17559/TV-20160108190015
Haralick RM, Dinstein I, Shanmugam K (1973) Textural features for image classification. IEEE Trans Syst Man Cybern SMC-3:610–621. https://doi.org/10.1109/TSMC.1973.4309314
International Maritime Organization (2014) International convention for safe containers (CSC). American Nautical Services. https://www.amnautical.com/collections/all/imo-digital-publications
Iskra P, Hernández RE (2012) Toward a process monitoring of CNC wood router. Sensor selection and surface roughness prediction. Wood Sci Technol 46:115–128. https://doi.org/10.1007/s00226-010-0378-7
Islam R, Uddin J, Kim JM (2018) Texture analysis based feature extraction using Gabor filter and SVD for reliable fault diagnosis of an induction motor. Int J Inf Technol Manag 17:20. https://doi.org/10.1504/IJITM.2018.089452
ISO (2013) ISO 1496–1:2013 Series 1 freight containers—specification and testing—part 1: general cargo containers for general purposes. International Standards Organization. https://www.iso.org/standard/59672.html
Jin J, Dai C, Hsu WE, Yu C (2009) Properties of strand boards with uniform and conventional vertical density profiles. Wood Sci Technol 43:559–574. https://doi.org/10.1007/s00226-009-0248-3
Martínez-Martínez V, del Alamo-Sanza M, Menéndez-Miguélez M, Nevares I (2018) Method to estimate the medullar rays angle in pieces of wood based on tree-ring structure: application to planks of Quercus petraea. Wood Sci Technol 52:519–539. https://doi.org/10.1007/s00226-017-0979-5
Meng F, Yu Y, Yu Y (2016) Manufacturing technology and application of bamboo-wood composite. China Wood Based Panels 23:23–26
Naderpour H, Rafiean AH, Fakharian P (2018) Compressive strength prediction of environmentally friendly concrete using artificial neural networks. J Build Eng 16:213–219. https://doi.org/10.1016/j.jobe.2018.01.007
Ravanidi SAH, Pan N (2011) The influence of gray-level co-occurrence matrix variables on the textural features of wrinkled fabric surfaces. J Text Inst 102:315–321. https://doi.org/10.1080/00405001003737540
Wu R (2012) The quantification of sensory evaluation of the famous green tea quality using modern instruments (in Chinese). Dissertation, University of Jiangsu
Sain SR, Vapnik VN (1996) The nature of statistical learning theory. Technometrics 38:409. https://doi.org/10.2307/1271324
Schubert M, Kläusler O (2020) Applying machine learning to predict the tensile shear strength of bonded beech wood as a function of the composition of polyurethane prepolymers and various pretreatments. Wood Sci Technol 54:19–29. https://doi.org/10.1007/s00226-019-01144-6
Sun F (2001) Model theory and strength prediction of mechanical properties of bamboo wood composite container floor structure (in Chinese). Dissertation, Nanjing Forestry University
Tiryaki B (2008) Application of artificial neural networks for predicting the cuttability of rocks by drag tools. Tunn Undergr Space Technol 23:273–280. https://doi.org/10.1016/j.tust.2007.04.008
Tiryaki S, Hamzaçebi C (2014) Predicting modulus of rupture (MOR) and modulus of elasticity (MOE) of heat treated woods by artificial neural networks. Meas J Int Meas Confed 49:266–274. https://doi.org/10.1016/j.measurement.2013.12.004
Tiryaki S, Özşahin Ş, Yildirim I (2014) Comparison of artificial neural network and multiple linear regression models to predict optimum bonding strength of heat treated woods. Int J Adhes Adhes 55:29–36. https://doi.org/10.1016/j.ijadhadh.2014.07.005
Wang H, Qi H, Wang X-F (2013) A new Gabor based approach for wood recognition. Neurocomputing 116:192–200. https://doi.org/10.1016/j.neucom.2012.02.045
Xian G (2012) Test and research of a new-style honeycomb structure floor used on dry cargo container (in Chinese). Dissertation, South China University of Technology
Xu W (1999) Influence of vertical density distribution on bending modulus of elasticity of wood composite panels: a theoretical consideration. Wood Fiber Sci 31:277–282
Xu M, Ping X (2003) An improved fast Fourier transform in polar coordinate system. In: Proceedings of the 2003 IEEE international conference on intelligent transportation systems. IEEE, pp 1735–1739. https://doi.org/10.1109/ITSC.2003.1252780
Yang P, Yang G (2016) Feature extraction using dual-tree complex wavelet transform and gray level co-occurrence matrix. Neurocomputing 197:212–220. https://doi.org/10.1016/j.neucom.2016.02.061
Zhang J (2001) Try to analysis the ISO standard of series 1 freight containers rationale for structure test criteria (second section) (in Chinese). Commun Stand 06:31–33
Zhang Q, Sun F, Li Y (1997) A study on the properties in service of bamboo and wood composite container floor—contrasting and analyzing with Apitong plywood floor (in Chinese). J Nanjing for Univ (nat Sci) 01:29–34
Zhang Y, Liu S, Cao J et al (2016) Wood board image processing based on dual-tree complex wavelet feature selection and compressed sensing. Wood Sci Technol 50:297–311. https://doi.org/10.1007/s00226-015-0776-y
Zheng Z, Yu Y, Lin S (2016) Discussion about the use of OSB boards to produce bamboo/wood composite container floors (in Chinese). For Mach Woodwork Equip 44:29–32
Zhou C, Dai C, Smith GD (2011) Modeling vertical density profile formation for strand-based wood composites during hot pressing: part 1. Model Dev Compos Part B Eng 42:1350–1356. https://doi.org/10.1016/j.compositesb.2011.05.036
Funding
This research was supported by National Natural Science Foundation of China (Project no. 31660174), Guangxi Innovation-Driven Development Special Fund Project of China (Project no. AA17204087-16).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they do not have any conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Liang, Y., Cheng, F., Jiang, Z. et al. Concentrated load simulation analysis of bamboo-wood composite container floor. Eur. J. Wood Prod. 79, 1183–1193 (2021). https://doi.org/10.1007/s00107-021-01726-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-021-01726-x