Abstract
In this study, kiri wood (Paulownia spp.) is assessed as potential core layer material for blockboards. Blockboards with core layers made of kiri and spruce (Picea abies) were produced using Anthocephalus cadamba as crossband veneer and beech (Fagus sylvatica) as face veneer. With spruce as core layer material, higher values for bending strength and modulus of elasticity, tested in grain direction, and screw withdrawal resistance were obtained. In return, blockboards with kiri as core layer material were 31% lighter and showed a more homogeneous core layer material with regard to density.
Similar content being viewed by others
References
Barton IL, Nicholas ID, Ecroyd CE (2007) Paulownia. For Res Bull 231:71
DIN EN 636 (2015) Plywood—specifications; German version EN 636:2012 + A1:2015. DIN-Normenausschuss Holzwirtschaft und Möbel (NHM), Berlin
EN 310 (1993) Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version. European Committee for Standardisation, Brussels
EN 320 (2011) Particleboards and fibreboards—determination of resistance to axial withdrawal of screws; German version. European Committee for Standardisation, Brussels
EN 323 (1993) Wood-based panels; determination of density; German version. European Committee for Standardisation, Brussels
Marutzky R, Sauerwein P, Schwab H (2008) Sperrholz. Informationsdienst Holz, Reihe Informationsdienst Holz spezial. Fraunhofer-Institut für Holzforschung; Verband der Deutschen Holzwerkstoffindustrie e.V. (in English: Plywood. Informationsdienst Holz, series Informationsdienst Holz spezial)
Nelis PA, Michaelis F, Krause KC, Mai C (2018) Kiri wood (Paulownia tomentosa): can it improve the performance of particleboards? Eur J Wood Wood Prod 76:445–453. https://doi.org/10.1007/s00107-017-1222-7
Rao AN (1986) Paulownia in China: cultivation and utilization. Asian Network for Biological Sciences (ANBS) and International Development Research Centre (IDRC), Singapore
Acknowledgements
The authors wish to acknowledge funding by the AiF Projekt GmbH (project no. KF2454610WZ4).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Nelis, P.A., Henke, O. & Mai, C. Comparison of blockboards with core layers made of kiri (Paulownia spp.) and of spruce (Picea abies) regarding mechanical properties. Eur. J. Wood Prod. 77, 323–326 (2019). https://doi.org/10.1007/s00107-019-01381-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-019-01381-3