Advertisement

European Journal of Wood and Wood Products

, Volume 76, Issue 3, pp 1029–1035 | Cite as

Effect of seawater wetting on the weathering of wood

  • André Klüppel
  • Carsten Mai
Original
  • 115 Downloads

Abstract

This study examines individual and interactive effects of seawater wetting and UV irradiation on the tensile strength of Scots pine (Pinus sylvestris) micro-veneers. In a first experiment, veneers were cyclically wetted with demineralized water or synthetic seawater and dried at 40 °C. In a second experiment, veneers were exposed to artificial weathering including UV irradiation and spray of seawater or of demineralized water. Cyclic wetting with seawater severely decreased finite-span tensile strength (f-strength) but did not affect zero-span tensile strength (z-strength). Cyclic wetting with demineralized water decreased neither f-strength nor z-strength. During artificial weathering, type of water had no significant effect on f-strength loss. However, FTIR measurements showed that seawater-weathered veneers contained more lignin than those weathered with demineralized water. Repeated wetting with seawater is assumed to damage the cell wall matrix, because salt crystals, which grow inside the cell wall nanopores during drying, exert stress on the adjacent material. At the same time, seawater inhibits delignification resulting from photodegradation. Therefore, seawater wetting changes nature and mode of weathering but not necessarily the degradation rate measured as f-strength loss of micro-veneers.

Notes

Acknowledgements

We thank Michael Altgen, Bernd Lütkemeier and Kim Krause for their constructive and critical comments that helped to improve the manuscript.

References

  1. Biblis EJ (1970) Effect of thickness of microtome sections on their tensile properties. Wood Fiber Sci 2:19–30Google Scholar
  2. Blanchette RA, Held BW, Farrell RL (2002) Defibration of wood in the expedition huts of Antarctica: an unusual deterioration process occurring in the polar environment. Polar Record 38:313–322CrossRefGoogle Scholar
  3. Buchelt B, Pfriem A (2011) Influence of wood specimen thickness on its mechanical properties by tensile testing: solid wood versus veneer. Holzforschung 65:249–252CrossRefGoogle Scholar
  4. Cragg SM (1996) Timber in the marine environment. Timber Trades J 376:26–28Google Scholar
  5. Crossman M, Simm J (2004) Manual on the use of timber in coastal and river engineering. Thomas Telford, LondonCrossRefGoogle Scholar
  6. Derbyshire H, Miller ER (1981) The photodegradation of wood during solar irradiation. 1. Effects on the structural integrity of thin wood strips. Holz Roh-Werkst 39:341–350CrossRefGoogle Scholar
  7. Derbyshire H, Miller ER, Turkulin H (1995) Investigations into the photodegradation of wood using microtensile testing. 1. The application of microtensile testing to measurement of photodegradation rates. Holz Roh-Werkst 53:339–345CrossRefGoogle Scholar
  8. Derbyshire H, Miller ER, Turkulin H (1997) Investigations into the photodegradation of wood using microtensile testing—Part 3: The influence of temperature on photodegradation rates. Holz Roh-Werkst 55:287–291CrossRefGoogle Scholar
  9. Evans PD (1988) A note on assessing the deterioration of thin wood veneers during weathering. Wood Fiber Sci 20:487–492Google Scholar
  10. Evans PD, Banks WB (1988) Degradation of wood surfaces by water—changes in mechanical properties of thin wood strips. Holz Roh-Werkst 46:427–435CrossRefGoogle Scholar
  11. Evans PD (2008) Weathering and photoprotection of wood. In: Schultz TP, Militz H, Freeman MH et al (eds) Development of commercial wood preservatives. American Chemical Society, Washington D.C., pp 69–120CrossRefGoogle Scholar
  12. Faix O (1991) Classification of lignins from different botanical origins by FT-IR spectroscopy. Holzforschung 45:21–27CrossRefGoogle Scholar
  13. Flatt RJ, Steiger M, Scherer GW (2007) A commented translation of the paper by C.W. Correns and W. Steinborn on crystallization pressure. Environ Geol 52:187–203CrossRefGoogle Scholar
  14. Gurnagul N, Page DH (1989) The difference between dry and rewetted zero-span tensile strength. Tappi J 72:164–167Google Scholar
  15. Gutierrez MI, Criado S, Garcia NA (1998) Salt effect on sensitized photooxidations. A kinetic approach to environmental decomposition of marine contaminants. Sci Mar 62:217–223CrossRefGoogle Scholar
  16. Harrington KJ, Higgins HG, Michell AJ (1964) Infrared spectra of Eucalyptus regnans F.Muell. and Pinus radiata D. Don. Holzforschung 18:108–113CrossRefGoogle Scholar
  17. Highley TL (1997) Decay in waterfront structures: recognition, prevention, and remedial treatment. Wood Design Focus 7:14–21Google Scholar
  18. Hon DNS (1975) Formation of free radicals in photoirradiated cellulose. VI. Effect of lignin. J Polym Sci Polym Chem Edn 13:2641–2652CrossRefGoogle Scholar
  19. Hon DNS (1994) Degradative effects of ultraviolet light and acid rain on wood surface quality. Wood Fiber Sci 26:185–191Google Scholar
  20. Hon DNS (2001) Weathering and photochemistry of wood. In: Hon DNS, Shiraishi N (eds) Wood and cellulosic chemistry. Dekker, New York, pp 513–546Google Scholar
  21. Hon DNS, Chang S-T, Feist WC (1982) Participation of singlet oxygen in the photodegradation of wood surfaces. Wood Sci Technol 16:193–201CrossRefGoogle Scholar
  22. Johnson BR, Ibach RE, Baker AJ (1992) Effect of salt water evaporation on tracheid separation from wood surfaces. Forest Prod J 42:57–59Google Scholar
  23. Jones PD, Shmulsky R, Kitchens S, Barnes M (2011) What is salt killed wood? Publication 2662. Extension Service of Mississippi State UniversityGoogle Scholar
  24. Kirker GT, Glaeser J, Lebow ST et al (2011) Physical deterioration of preservative treated poles and pilings exposed to salt water. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, MadisonCrossRefGoogle Scholar
  25. Klüppel A, Mai C (2012) Effect of lignin and hemicelluloses on the tensile strength of micro-veneers determined at finite span and zero span. Holzforschung 66:493–496CrossRefGoogle Scholar
  26. Kollmann F (1951) Technologie des Holzes und der Holzwerkstoffe. Band 1, 2nd edn. Springer, BerlinGoogle Scholar
  27. Morrell JJ, Helsing GG, Graham RD (1984) Marine wood maintenance manual: a guide for proper use of Douglas-fir in marine exposures. Oregon State University, Forest Research Lab, CorvallisGoogle Scholar
  28. Norgren M, Edlund H (2003) Ion specific differences in salt induced precipitation of kraft lignin. Nordic Pulp Pap Res J 18:400–403CrossRefGoogle Scholar
  29. Pandey KK (2005) Study of the effect of photo-irradiation on the surface chemistry of wood. Polym Degrad Stab 90:9–20CrossRefGoogle Scholar
  30. Parameswaran N (1981) Micromorphology of spruce timber after long-term service in a potash store house. Holz Roh-Werkst 39:149–156CrossRefGoogle Scholar
  31. R Development Core Team (2010) R: a language and environment for statistical computing. R Foundation for Statistical Computing, ViennaGoogle Scholar
  32. Rowell RM, Pettersen R, Han JS et al (2005) Cell wall chemistry. In: Rowell RM (ed) Handbook of wood chemistry and wood composites. CRC, Boca RatonGoogle Scholar
  33. Schulz U (2009) Accelerated testing: nature and artificial weathering in the coatings industry, 1. Aufl. Vincentz Network, HannoverGoogle Scholar
  34. Seeger M, Otto W, Flick W, Bickelhaupt F, Akkerman O (2005) Magnesium compounds, Chap. 3, Ullmann’s Encyclopedia of Industrial Chemistry. Wiley-VCH, WeinheimGoogle Scholar
  35. Senft JF, Bendtsen BA (1985) Measuring microfibrillar angles using light microscopy. Wood Fiber Sci 17:564–567Google Scholar
  36. Stamm AJ (1934) Effect of inorganic salts upon the swelling and the shrinking of wood. J Am Chem Soc 56(5):1195–1204CrossRefGoogle Scholar
  37. Steiger M (2005) Crystal growth in porous materials—I: the crystallization pressure of large crystals. J Cryst Growth 282:455–469CrossRefGoogle Scholar
  38. Turkulin H, Derbyshire H, Miller ER (2004) Investigations into the photodegradation of wood using microtensile testing - Part 5: The influence of moisture on photodegradation rates. Holz Roh-Werkst 62:307–312CrossRefGoogle Scholar
  39. Westphal G, Kristen G, Wegener W, Ambatiello P, Geyer H, Epron B, Bonal C, Steinhauser G (2005) Sodium chloride, Ullmann’s Encyclopedia of Industrial Chemistry. Wiley-VCH, WeinheimGoogle Scholar
  40. Wilcox WW, Botsai EE, Kubler H (1991) Wood as a building material: a guide for designers and builders. Wiley, New YorkGoogle Scholar
  41. Williams RS (2005) Weathering of wood. In: Rowell RM (ed) Handbook of wood chemistry and wood composites. CRC, Boca RatonGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2017

Authors and Affiliations

  1. 1.University of Goettingen, Wood Biology and Wood ProductsGöttingenGermany

Personalised recommendations