Skip to main content

Derivation of buckling design curves via FE modelling for in-plane compressed timber log-walls in accordance with the Eurocode 5


In ‘Blockhaus’ systems the structural capacity derives from surface interactions and friction mechanisms between multiple timber logs stacked horizontally one upon each other. Unlike masonry or concrete walls, timber log-walls are characterized by the absence of a full structural interaction between the basic components, hence resulting in ‘assembled’ rather than ‘fully monolithic’ structural systems characterized by high flexibility of timber and usually high slenderness ratios. The current Eurocode 5 for timber structures, however, does not provide formulations for the prediction of the critical load of log-haus walls under in-plane compressive loads. In this work, based on past experimental tests and detailed Finite-Element (FE) models, extended numerical investigations are performed on timber log-walls. A wide number of configurations (more than 900) characterized by different geometrical properties, timber log cross-sections, number and position of door and window openings, presence of in-plane rigid (RF) or fully flexible (FF) inter-storey floors, as well as initial curvatures and/or load eccentricities, are analyzed under monotonic in-plane compressive load. Careful consideration is also given to the influence of additional out-of-plane pressures (e.g., wind pressures) combined with the in-plane compressive load. In accordance with the buckling design approach proposed by the Eurocode 5 for timber columns, non-dimensional buckling curves are then proposed for timber log-walls under in-plane compression. These curves are based on an accurate calibration of the k c buckling coefficient and the related imperfection factors on the results of the numerical parametric study. The developed simple and conservative approach for the design of log-walls can be proposed for implementation in the new generation of the Eurocode 5.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13


  • Baláž I (2005) Lateral torsional buckling of timber beams. Wood Research 50(1):52–58

    Google Scholar 

  • Bedon C, Fragiacomo M (2015) Numerical and analytical assessment of the buckling behaviour of Blockhaus log-walls under in-plane compression. Eng Struct 82:134–150

    Article  Google Scholar 

  • Bedon C, Rinaldin G, Izzi M, Fragiacomo M, Amadio C (2015) Assessment of the structural stability of Blockhaus timber log-walls under in-plane compression via full-scale experiments. Constr Build Mater 78:474–490

    Article  Google Scholar 

  • Bouras F, Chaplain M, Nafa Z (2010) Experimental and modeling buckling of wood-based columns under repeated loading, Proceedings of the 14th International Conference on Experimental Mechanics, Poitiers, France, 4–9 July 2010, code 110074

  • Bouras F, Chaplain M, Nafa Z, Breysse D, Tran H (2012) Experimental behavior of wood columns under extreme loading: cyclic buckling. Proceedings of the World Conference on Timber Engineering WCTE 5:545–550

    Google Scholar 

  • Eilering S, Beißner E (2011) On the stability of circular curved beams of glue-laminated timber [Zur Stabilität von BSH-Kreisbogenbindern]. Bauingenieur 86(2):76–83

    Google Scholar 

  • EN 1993-1-1: 2005—Eurocode 3—Design of steel structures—Part 1-1: general rules and rules for buildings. European Committee for Standardization (CEN), Brussels, Belgium

  • EN 1995-1-1-2005—Eurocode 5—Design of timber structures—Part 1-1: General and rules for buildings. European Committee for Standardization (CEN), Brussels, Belgium

  • EN 1996-1-1:2005—Eurocode 6—Design of masonry structures—Part 1-1: General rules for reinforced and unreinforced masonry structures, European Committee for Standardization (CEN), Brussels, Belgium

  • EN 338 (2009). Structural timber-strength classes. European Committee for Standardization (CEN), Brussels, Belgium

  • EuroWood Construction (NZ) (2016) Accessed July 2015

  • Haller P, Hartig J, Wehsener K (2014) Application of moulded wooden tubes as structural elements, Proceedings of the World Conference on Timber Engineering WCTE2014, Quebec City, Canada, 10–14 August 2014; Code 110957

  • Heimeshoff B, Kneidl R (1992a) Zur Abtragung vertikaler Lasten in Blockwänden—Experimentelle Untersuchungen (Carrying of vertical loads by walls of log houses) (In German). Holz Roh- Werkst 50:173–180

    Article  Google Scholar 

  • Heimeshoff, B, Kneidl, R (1992b) Bemessungsverfahren zur Abtragung vertikaler Lasten in Blockwänden. (Methods of calculation for walls of log houses under vertical loads) (In German) Holz Roh-Werkst 50:441–448

  • Hofmann R, Kuhlmann U (2014) Simplified design of glued laminated timber girders for the torsional moment caused by stability effects, materials and joints in timber structures, pp. 823–830, ISBN 978-94-007-8710-8

  • Kessel MH (2012) Imperfections of pitched timber trusses [Imperfektionen von satteldachförmigen Fachwerkträgern aus Holz]. Bauingenieur 87(1):277–287

    Google Scholar 

  • Leicester RH (2009) Buckling strength of timber structures. Aust J Struct Eng 9(3):249–256

    Google Scholar 

  • LogHomeScotland (United Kingdom) (2016). Accessed July 2015

  • Malhotra SK (1989) Recent developments relating to design of solid and built-up timber compression members. Int J Hous Sci Appl 13(1):35–44

    Google Scholar 

  • Namiki H, Nasu H (2014) Study on prevention for buckling of combined pillar with fiber materials or screws, proceedings of the world conference on timber engineering WCTE2014, Quebec City, Canada, 10–14 August 2014; Code 110957

  • PERR Blockhäuser (Germany) (2016). Accessed July 2015

  • Polar Life Haus® (Finland) (2016). Accessed July 2015

  • Rodman U, Saje M, Planinc I, Zupan D (2013) The lateral buckling of timber arches. Int J Struct Stab Dyn 13(08):16. doi:10.1142/S0219455413500405

    Article  Google Scholar 

  • Rubner Haus AG Spa (Italy) (2016) Accessed July 2015

  • Rusticasa Construções Lda (Portugal) (2016).

  • Satterwhite Log Homes (TX, USA) (2016). Accessed July 2015

  • Schnabl S, Turk G, Planinc I (2011) Buckling of timber columns exposed to fire. Fire Saf J 46(7):431–439

    Article  Google Scholar 

  • Simulia (2012) ABAQUS v.6.12 Computer Software, Dassault Systems, Providence, RI, USA

  • Taheri F, Nagaraj M, Khosravi P (2009) Buckling response of glue-laminated columns reinforced with fiber-reinforced plastic sheets. Compos Struct 88(3):481–490

    Article  Google Scholar 

  • The Original Lincoln Logs© (NY, USA) (2016). Accessed July 2015

  • Theiler M, Frangi A, Steiger R (2013) Strain-based calculation model for centrically and eccentrically loaded timber columns. Eng Struct 53(11):1103–1116

    Article  Google Scholar 

  • Xiao Q, Doudak G, Mohareb M (2014) Lateral torsional buckling of wood beams: FEA-modelling and sensitivity analysis, proceedings of the world conference on timber engineering WCTE2014, Quebec City, Canada, 10–14 August 2014; Code 110957

  • Zahn JJ (1973) Lateral stability of wood beam-and-deck systems. ASCE J Struct Div 99(ST7):1391–1408

    Google Scholar 

Download references


DPC-ReLUIS is gratefully acknowledged for partially funding the research activity within the framework of the “PR4-Timber structures” project.

Author information

Authors and Affiliations


Corresponding author

Correspondence to Chiara Bedon.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary material 1 (PDF 17 kb)

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Bedon, C., Fragiacomo, M. Derivation of buckling design curves via FE modelling for in-plane compressed timber log-walls in accordance with the Eurocode 5. Eur. J. Wood Prod. 75, 449–465 (2017).

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI:


  • Timber
  • Slenderness Ratio
  • Initial Curvature
  • Timber Structure
  • Initial Imperfection