Skip to main content

Advertisement

SpringerLink
Log in

Active vibration control of circular saw blades

  • Original
  • Published:
European Journal of Wood and Wood Products Aims and scope Submit manuscript

Abstract

Specific conditions are very frequently established in mechanical systems that contain rotating thin disk-shaped tools, causing undesirable transverse deflections or even vibrations. The excitation mode of rotating tools is mechanical, external loads change with time and in certain cases even self-excitation can occur. The problem can be eliminated by a more rigid design of a disk tool, but because of numerous technological requirements this is unacceptable. It is necessary to combine the basic structure with a system, the operation of which reduces most of the energy produced by the rotating and transversely vibrating tool. An active electromagnetic system for damping lateral vibrations of circular saw blades is presented. This electromagnetic system consists of two electromagnets, mounted transversely to the body that carries a ferromagnetic saw blade. The current running through the two electromagnets is controlled by a robust algorithm, which takes into account the static deformation of the saw blade. An experimental model was used to test the efficiency and operation stability of this system. The results show that the developed system represents a very efficient tool for reducing lateral vibrations of rotating disk tools.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14

Similar content being viewed by others

References

  • Bučar B, Merhar M (2008) Modelling of response of aerodynamic excited idling circular saw blade with geometrical imperfection. Wood Res 53:111–120

    Google Scholar 

  • Chen Y, Wang XG, Sun C, Devine F, De Silva CW (2003) Active vibration control with state feedback in woodcutting. J Vib Control 9:645–664

    Article  Google Scholar 

  • Ellis RW, Mote CD Jr (1978) Increased lateral saw stiffness and vibration damping with feedback control. Wood Sci 11:56–64

    Google Scholar 

  • Gospodarič B, Vončina D, Bučar B (2007) Active electromagnetic damping of laterally vibrating ferromagnetic cantilever beam. Mechatronics 17:291–298

    Article  Google Scholar 

  • Kopecky Z, Rousek M, Hlaskova L, Vesely P, Svoboda E (2011) Quality of the workpiece surface at cutting by a circular-saw blade with the irregular tooth pitch. For Wood Technol 74:192–198

    Google Scholar 

  • Lin CL, Liu VT, Hao PS (2000) Robust neuro control for rotating disc vibration. Proc Inst Mech Eng Part C J Mech Eng Sci 214:1529–1544

    Article  Google Scholar 

  • Ma R, Sinha A (1996) A neural network based active vibration absorber with state feedback control. J Sound Vib 190:121–128

    Article  Google Scholar 

  • Mote CD Jr, Rahimi A (1984) Real time vibration control of rotating circular plates by temperature control and system identification. J Dyn Syst Meas Contr 106:123–128

    Article  Google Scholar 

  • Qiu JB, Huang XQ, Wang DQ (2001) Experiments on the active control of circular disk vibration. In: Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, pp 165–167

  • Sinn G, Sandak J, Ramananantoandro T (2009) Properties of wood surfaces—characterisation and measurement. a review. cost action e35 2004-2008: wood machining—micromechanics and fracture. Holzforschung 63:196–203

    Article  CAS  Google Scholar 

  • Sun JC, Wang XG, Xi FJ (2000) Sliding mode active vibration control of circular saws. In: Proceedings of the 2000 IEEE International Conference on Control Applications, pp 953–958

  • Tian J, Hutton SG (1999) Traveling-wave modal identification based on forced or self-excited resonance for rotating discs. J Vib Control 7:3–18

    Article  Google Scholar 

  • Wang XG, Xi FJ, Li D, Qin Z (1999) Estimation and control of vibrations of circular saws. In: Proceedings of the 1999 IEEE, International conference on control applications 1:514–520

    Article  Google Scholar 

  • Xi F, Wang XG, Qin Z (2000) Modelling and analysis for active control of circular saw vibrations. J Vib Control 6:1225–1241

    Article  Google Scholar 

  • Yilmaz NG (2013) Process efficiency comparison of a sandwich-core sawblade and a conventional sawblade used in stone-machining. J Clean Prod 47:26–31

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Wood Science and Technology, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000, Ljubljana, Slovenia

    B. Gospodarič, B. Bučar & G. Fajdiga

Authors
  1. B. Gospodarič
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. B. Bučar
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. G. Fajdiga
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to G. Fajdiga.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Gospodarič, B., Bučar, B. & Fajdiga, G. Active vibration control of circular saw blades. Eur. J. Wood Prod. 73, 151–158 (2015). https://doi.org/10.1007/s00107-014-0874-9

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00107-014-0874-9

Keywords

Search

Navigation