Abstract
Based on the equilibrium method of plasticity, the theoretical explanation of the bearing strengths of locally loaded timber blocks is given in the Appendices. The result of the numerical construction of the slip-lines can precisely be represented by an analytical function of a logarithmic spiral that can be shown to be the exact solution. This function in one variable can be given in the power law form leading to a theoretical and experimental value of that power of 0.5.
This power representation of the stress spreading model of the strength increase, by confined dilatation, provides simple rules for the code and a simple design method that precisely matches to the data in all circumstances and loading cases and explains the apparent contradictory test results of Suenson, the Eurocode, the French rules, Graf, Korin and Augustin et al. and, as shown before, explains other comparable loading cases as e.g. by pin dowel connections (see literature).
Zusammenfassung
In den Anhängen wird auf Grundlage des Traglastverfahrens die Erklärung für die Querdruckfestigkeit von Holz bei Schwellendruck theoretisch hergeleitet. Die numerisch hergeleiteten Gleitlinien können analytisch als Funktion einer logarithmischen Spirale beschrieben werden. Es lässt sich zeigen, dass dies eine exakteLösung darstellt. Diese Funktion mit einer Variablen kann als Exponentialfunktion beschrieben werden, wobei sich der Exponent theoretisch und experimentell zu 0,5 ergibt.
Dieses Modell der Festigkeitssteigerung und Spannungsverteilung durch begrenzte Dilatation erlaubt eine einfache Normierung und liefert einfache Berechnungsregeln, die in allen Fällen und Belastungsarten genau mit den experimentellen Daten übereinstimmen, und die scheinbar widersprüchlichen Versuchsergebnisse von Suenson, des Eurocodes, der französischen Regeln, von Graf, Korin und Augustin et al. sowie andere vergleichbare Belastungsarten, wie zum Beispiel bei Stabdübelverbindungen (siehe Literatur), erklären.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Augustin M, Ruli A, Brandner R, Schickhofer G (2006) Behaviour of glulam in compression perpendicular to grain in different strength grades and load configurations. CIB-W18/39-12-6, Florence
Ballerini M (1999) A new set of tests on beams loaded perpendicular to the grain by dowel joints, CIB-W18/32-7-2, Graz, Austria
Kollmann F (1984) Principles of wood science and technology, vol. I. Springer-Verlag, Berlin (reprint from 1951)
Korin U (1990) Compression perpendicular to grain. CIB-W18/23-6-1, Lisbon
Larsen HJ (1975) The design of timber beams. CIB-W18/5-10-1, Karlsruhe
van der Put TACM (1982) A general failure criterion for wood, Proc. IUFRO S5.02 paper 23, Boras, Sweden and the extension: The tensor-polynomial failure criterion for wood polymers. www.dwsf.nl/downloads.htm, Delft, 2005
Schwartz H (1969) Die Grenztragfähigkeit des Baugrundes bei Einwirkung vertikal gezogener Ankerplatten als zweidimensionales Bruchproblem. PhD dissert. University of Stuttgart
van der Put TACM (2007) A new fracture mechanics theory of orthotropic materials like wood. Eng Fract Mech 74:771–781
van der Put TACM (1988) Explanation of the embedding strength of particle board, EC-project MA1B-0058-NL, 1988 or Res. Report TU-Delft 25-88-63/09-HSC-6
See also the theoretical explanation of the strength of nailed particle board to wood connections in: Res. Reports 4-79-6/HSC-3; 4-80-3/HSC-4; and 4-81-7/HSC-5
van der Put TACM (1991) Discussion of the failure criterion for combined bending shear and compression. CIB-W18/24-6-1, Oxford
van der Put TACM, Leijten AJM (2000) Evaluation of perpendicular to the grain failure of beams by concentrated loads of joints. CIB-W18/33-7-7, NL
van der Put TACM (2006a) Derivation of the shear strength of continuous beams, www.dwsf.nl/downloads.htm, Delft and CIB-W18/41. Date of access: May 2008
van der Put TACM (2006b) Determination of the bearing strength etc., DWSF-report www.dwsf.nl/downloads.htm. Date of access: May 2008
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
About this article
Cite this article
van der Put, T.A.C.M. Derivation of the bearing strength perpendicular to the grain of locally loaded timber blocks . Holz Roh Werkst 66, 409–417 (2008). https://doi.org/10.1007/s00107-008-0258-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-008-0258-0