Abstract
The determination of cutting conditions may help to control design and manufacturing processes. The machining database is important in wood machining. It is specific for each tool-machine. For each kind of wood piece, particular machining conditions are needed to reach a properly surface roughness and a safe work. The Couple Tool Material (COM) method is applied as a new methodology in wood working, centered in secondary wood processing industry, defining the working field of cutting tools taking in mind cutting parameters and limiting the number of experiments. Working perspectives are wide with the appearance of new cutting materials and high speed cutting processes, thus to create better working conditions in wood cutting will be easier with COM data utilization.
Zusammenfassung
Die Bestimmung von Schnittbedingungen kann helfen Design und Verarbeitungsprozesse zu kontrollieren. Die maschinelle Datenbank in der Holzwirtschaft ist von großer Wichtigkeit und spezifisch für jede Werkzeugmaschine. So werden auch für jede Art von Holzstück besondere Maschinenbedingungen benötigt, um eine saubere Oberflächenrauhigkeit und eine sichere Arbeit zu erzielen. Die Couple-Tool-Material-Methode (COM) wird (wie ein) als ein neues Verfahren in der Holzwirtschaft angewandt, zentral in der sekundären Holzverarbeitungs-Industrie, indem das Arbeitsfeld der Schnittwerkzeuge definiert wird und man die Schnittparameter sowie das Limitieren der Zahl der Experimente beachtet. Ein breites Spektrum von Arbeitsperspektiven eröffnet sich mit dem Aufkommen neuer Schnittmaterialien und Hochgeschwindigkeits-schnittprozessen. Durch die Verwendung von COM-Daten wird es einfacher den Bedürfnissen für bessere Arbeitsbedingungen beim Holzschneiden gerecht zu werden.
Similar content being viewed by others
References
AFNOR (1995) Domaine de fonctionnement des outils coupants. Couple Outil Matière. Partie 6: mode d'obtention du Couple Outil Matière en fraisage. Indice de classement: E 66-520-6, 57 pp
Bagur F (1996) Couple Outil Matière: une méthode de conception et de choix des outils de coupe. Colloque International sur l'évolution des matériaux pour outils de coupe, Cercle d'Etudes des Métaux, E.N.S.M. St. Etienne, Nov 1996, 10 pp
Garro O (1992) Conception d'éléments physiques de système de production: application aux machines outils à architecture parallèle. Thèse Université de Nancy I
Lefur E, Mathieu L (1990) Méthodes d'optimisation sous contraintes appliquées à la détermination des conditions de coupe. In: La gamme automatique en usinage, Groupe GAMA, pp 143–159
Levaillant G (1996) La prédétermination des conditions et paramètres d'usinage: nécessité, méthodes, moyens. Journée PRIMECA: coupe et usinage, Nantes, pp 103–110
Martin P (1980) Commande adaptative de machines-outils. Etude d'un système d'optimisation de l'opération de tournage avec mesure de l'usure de l'outil. Thèse Docteur en Sciences, Université de Nancy I
Rigal JF, Mehdi K (1996) Modèles dynamiques du comportement des tubes minces en tournage. Journée PRIMECA: coupe et usinage, Nantes, pp 17–22
Société TOOL (1996) Le Couple Outil Matière. Usinage par outils coupants. Société TOOL, Annecy, 11 pp
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aguilera, A., Méausoone, P.J. & Martin, P. A new methodology for wood cutting optimization in the secondary manufacturing processes. Holz Roh Werkst 61, 358–362 (2003). https://doi.org/10.1007/s00107-003-0403-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-003-0403-8