Abstract
A two-dimensional Green’s function suitable for a coated isotropic thermoelastic semi-infinite plane with a line heat source above the surface has been obtained using the method of images. Firstly, based on the control equations of the isotropic thermoelastic materials and the two-dimensional heat conduction equations, the general solutions to three harmonic functions have been obtained. Secondly, six potential function equations have been acquired using the method of images. Finally, three equations that are expressed by three harmonic functions have been obtained by substituting six series of harmonic functions into the boundary conditions of the coated surface. In this way, nine recursive equations have been determined. By taking Green’s function of the isotropic semi-infinite thermoelastic plane with a line heat source above the surface as the first term, the thermoelastic coupling field for the coated semi-infinite plane has been calculated using the recursive formula. The interface temperature increment component and the interface stress components of the coating structures have been calculated numerically. By analyzing the thermal stress of different coated materials, valuable conclusions such as the interface effect, tensile failure, and shear delamination have been obtained, which can provide a reliable basis for the design and analysis of thermal barrier coating structures.
Similar content being viewed by others
References
Zhuang, J.J., Guo, Y.Q., Xiang, N.: A study on microstructure and corrosion resistance of ZrO\(_{2}\)-containing PEO coatings formed on AZ31 Mg alloy in phosphate-based electrolyte. Appl. Surf. Sci. 357, 1463–1471 (2015)
Kumar, U.P., Kennady, C.J., Zhou, Q.Y.: Effect of salicylaldehyde on microstructure and corrosion resistance of electrodeposited nanocrystalline Ni-W alloy coatings. Surf. Coat. Technol. 283, 148–155 (2015)
Moridi, A., Azadi, M., Farrahi, G.H.: Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects. Surf. Coat. Technol. 243, 91–99 (2014)
Zhang, X.F., Zhou, K.S., Xu, W.: Reaction mechanism and thermal insulation property of Al-deposited 7YSZ thermal barrier coating. Surf. Coat. Technol. 31, 1006–1010 (2015)
Daroli, R.: Thermal barrier coatings technology: critical review, progress, update, remaining challenges and prospects. Int. Mater. Rev. 58(6), 315–348 (2013)
Lejcek, J.: The Green’s function of the theory of elasticity in anisotropic hexagonal medium. Czech. J. Phys. B19(6), 799–803 (1969)
Ernian, P., Fulvio, T.: Three-dimensional Green’s functions in anisotropic piezoelectric solids. Int. J. Solids Struct. 37(6), 943–958 (2000)
Ding, H.J., Chen, B., Liang, J.: General solutions for coupled equations for piezoelectric media. Int. J. Solids Struct. 33(16), 2283–2298 (1996)
Dang, H.Y., Zhao, M.H., Fan, C.Y., et al.: Analysis of arbitrarily shaped planar cracks in three-dimensional isotropic hygrothermoelastic media. J. Therm. Stresses. 41(6), 776–803 (2018)
Zhao, M.H., Dang, H.Y., Fan, C.Y.: Analysis of an arbitrarily shaped interface cracks in a three-dimensional isotropic thermoelastic bi-material. Part 1: Theoretical solution. Int. J. Solids Struct. 97–98, 168–181 (2016)
Hou, P.F., Tong, J., Zhao, M.: Two-dimensional steady-state general solution for isotropic thermoelastic materials with applications I: General solutions and fundamental solutions. Appl. Math. Model. 37(23), 9786–9797 (2013)
Hou, P.F., Jiang, H.Y., Li, Q.H.: Three-dimensional steady-state general solution for isotropic thermoelastic materials with applications I: general solutions. J. Therm. Stresses. 36(8), 9786–9797 (2013)
Wu, Z.G., Liu, Y.H.: Analytical solution for the singular stress distribution due to V-notch in an orthotropic plate material. Eng. Fract. Mech. 75(8), 2367–2384 (2008)
Wu, Z.G., Liu, Y.H., Zhan, C.X., et al.: Analytical solution for a concentrated force on the free surface of a coated material. J. Mech. Mater. Struct. 5(6), 875–886 (2011)
Xu, J.Q.: Mirror point method for stress analysis of bonded dissimilar materials. Acta Mech. Sinica. 36(1), 106–111 (2004)
Yang, Z., Li, H.B., Xu, J.Q.: Concentrated forces on free surface of coating materials with two same thickness coating Layers. Chin. Q. Mech. 25, 457–462 (2004)
Li, H.B., Xu, J.Q., Yang, Z.: Three dimensional theoretical solution of a normal force on the surface of two coating materials with the same thickness. J. Shanghai Jiaotong Univ. 39(5), 795–800 (2005)
Li, H.B., Xu, J.Q., Yang, Z.: Three-dimensional theoretical solution of a tangential force on the surface of two coating materials with the same thickness. Eng. Mech. 23, 45–51 (2006)
Yang, Z., Xu, J.Q.: 3D fundamental solution for a concentrated force acted at the interior of a thin-film coating layer. Chin. J. Solid Mech. 30(1), 15–20 (2009)
Hou, P.F., Jiang, H.Y., Li, J.R.: A method for the orthotropic coating-substrate system: Green’s function for a normal line force on the surface. Int. J. Mech. Sci. 96–97, 172–181 (2015)
Hou, P.Y., Jiang, H.Y., Tong, J., et al.: Study on the coated isotropic thermoelastic material based on the three-dimensional Green’s function for a point heat source. Int. J. Mech. Sci. 83, 155–162 (2014)
Hou, P.F., Zhang, W.H., Tang, J.P., et al.: Three-dimensional exact solutions of elastic transversely isotropic coated structures under conical contact. Surf. Coat. Technol. 369, 280–310 (2019)
Hou, P.F., Zhang, W.H., Chen, J.Y.: Three-dimensional exact solutions of transversely isotropic coated structures under tilted circular flat punch contact. Int. J. Mech. Sci. 151, 471–497 (2019)
Hou, P.F., Zhang, W.H., Chen, J.Y.: Three-dimensional exact solutions of homogeneous transversely isotropic coated structures under spherical contact. Int. J. Mech. Sci. 161, 136–173 (2019)
Hou, P.F., Zhang, Y.: Study on the piezoelectric coated devices based on the 2D Green’s functions under a tangential line force. Z. Angew. Math. Phys. 69(2), 1 (2018)
Hou, P.F., Zhang, Y., Chen, B.J.: Study on the interactions between the coatings of electric conductor or dielectric media and piezoelectric substrate in the piezoelectric functional devices. Aip. Adv. 7(9), 095109 (2017)
Hou, P.F., Zhang, Y.: An accurate and efficient method for the piezoelectric coated functional devices based on the two-dimensional Green’s functions for a normal line force and a line charge. Smart. Mater. Struct. 26, 095045 (2017)
Hou, P.F., Chen, B.J., Zhang, Y.: An accurate and efficient analytical method for 1D hexagonal quasicrystal coating under the tangential force based on the Green’s function. Int. J. Mech. Sci. 131–132, 982–1000 (2017)
Tong, J., Xu, Z.L., Li, J.P., et al.: Green’s function for a line heat source acting on the surface of a coated isotropic thermoelastic material. J. Therm. Stresses. 42(2), 279–293 (2019)
Hou, P.F., Chen, J.Y.: 2D accurate solutions for the orthotropic plate under normal load. Int. J. Mech. Sci. 145, 1–8 (2018)
Xu, J.Q., Chen, Y.Q., Yang, Z.: Theoretical solution for an infinite plate with a normal for on the surface. Chin. J. Solid Mech. 25, 394–398 (2004)
Acknowledgements
The authors extend sincere gratitude to Guangzhou Science, Technology and Innovation Commission of China (Nos. 201904010204, 202102021291), Department of Education of Guangdong Province of China (Nos. 2019GKTSCX031, 2019GKTSCX032, 2021GCZX018), and Hunan Province Natural Science Foundation of China (No. 2019JJ50633) for the fiscal sponsorship.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tong, J., Su, J., Liu, Yj. et al. Two-dimensional Green’s function for isotropic thermoelastic coating structure. Z. Angew. Math. Phys. 72, 199 (2021). https://doi.org/10.1007/s00033-021-01634-3
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00033-021-01634-3