Abstract
The pig iron nugget process is gaining in importance as an alternative to the traditional blast furnace. Throughout the process, self-reducing-fluxing dried greenballs composed of iron ore concentrate, reducing-carburizing agent (coal), flux (limestone) and binder (bentonite) are heat-treated. During the heat treatment, dried greenballs are first transformed into direct reduced iron (DRI), then to transition direct reduced iron (TDRI) and finally to pig iron nuggets. The furnace temperature and/or residence time and the corresponding levels of carburization, reduction and metallization dictate these transformations. This study involved the determination of threshold furnace temperatures and residence times for completion of all of the transformation reactions and pig iron nugget production. The experiments involved the heat treatment of self-reducing-fluxing dried greenballs at various furnace temperatures and residence times. The products of these heat treatments were identified by utilizing optical microscopy, apparent density and microhardness measurements.
This is a preview of subscription content, access via your institution.
References
Anameric, B., and Kawatra, S.K., 2004, “A laboratory study relating to the production and properties of pig iron nuggets,” Preprint number 04-098, presented at the SME Annual Meeting, Feb. 23–25, 2004, Denver, Colorado.
Anameric, B, Kawatra S.K., and Rundman K.B., 2005, Carburization Effects on Pig Iron Nugget Production, Preprint number 05-040, presented at the SME Annual Meeting, Feb. 28-March 2, 2005, Salt Lake City.
ASTM E 3, 2001, “Standard Guide for Preparation of Metallographic Specimens,” Annual Book of ASTM Standards, Vol. 03.01, Metals Test Methods and Analytical Procedures, Metals, Mechanical testing, elevated and Low-temperature Tests, Metallography, pp. 1–11.
ASTM B 311-93, 2002, “Density Determination for Power Metallurgy (P/ M)Materials Containing Less Than Two Percent Porosity,” Annual Book of ASTM Standards, Vol. 02.05, Nonferrous Metal Products, Metallic and Inorganic Coatings, Metal Powders, Sintered P/M Structural Parts, pp. 86–89.
ASTM E 92-82, 1997, “Standard Test Method for Vickers Hardness of Metallic Materials,” Annual Book of ASTM Standards, Vol. 03.01, Metals Test Methods and Analytical Procedures, Metals, Mechanical Testing, Elevated and Low-temperature Tests, Metallography, pp. 229–237.
ASTM E 384, 1999a, “Standard Test Method for Microindentation Hardness of Materials,” Annual Book of ASTM Standards, Vol. 03.01, Metals Test Methods and Analytical Procedures, Metals, Mechanical Testing, Elevated and Low-temperature Tests, Metallography, pp. 418–427.
ASTM E 407, 1999b Standard Practice for Microetching Metals and Alloys, Annual Book of ASTM Standards, Vol. 03.01, Metals Test Methods and Analytical Procedures, Metals, Mechanical Testing, Elevated and Low-temperature Tests, Metallography, pp. 474–493.
Ashby, M.F., and Jones, D.R., 1986, Engineering Materials 2, An Introduction to Microstructures, Processing and Design, Pergamon Press, pp. 10.
Blomgren, S., and Tholander, E., 1986, “Influence of the Ore Smelting Course on the Slag Microstructures at Early Ironmaking, Usable as Identification Basis for the Furnace Process Employed, Scandinavian Journal of Metallurgy, Vol. 15, pp. 151–160.
Callister, W.D., 1997, Materials Science and Engineering, An Introduction, 4th Edition, John Wiley and Sons, Inc., New York.
Chatterjee, A., 1994, Beyond the Blast Furnace, CRC Press, Inc.
Davis, J.R., 1990, Metals Handbook, Properties and Selection: Irons, Steels, and High Performance Alloys, ASTM International, 10th Edition, Vol. 1, 1990, pp. 93.
Davis, M.E., and Davis, R.J., 2003, Fundamentals of Chemical Reaction Engineering.
Heine, R.W., and Barton, J.E., 1977, “Eutectic solidification of white iron and its effects on malleable iron castings,” Transactions of the American Foundarymen’s Society, Vol. 85, pp. 379–388.
Kawatra, S.K., and Ripke, S.J., 2001, “Developing and understanding the bentonite fiber bonding mechanism,” Minerals Engineering, Elsevier Press, Vol. 14, No. 6, pp. 647–659.
Krauss G., 1990, “Microstructures, processing and properties of steels,” Metals Handbook, Properties and Selection: Irons, Steels, and High Performance Alloys, ASTM International, 10th Edition, Vol. 1, pp.126, and 127,132.
Kobayashi, I., Tanigahi, Y, and Uragami, A., 2001, “A new process to produce iron directly from fine ore and coal,” Iron and Steelmaker, Vol. 28, No. 9, pp. 19–22.
Lankford, W.T., Samways, N.L., Craven, R.F., and McGannon, H.E., 1985, The Making, Shaping and Treating of Steel, United States Steel Press, 10th Edition.
Lide, D.R., 2001, Handbook of Chemistry and Physics, CRC Press, 82nd Edition, 2001–2002, pp. 4–62, 4–63.
Maddin, R., 1975, “Early iron metallurgy in the Near East,” Transactions of the Iron and Steel Institute of Japan, Vol. 15, No. 2, pp. 38–68.
Mampaey, F., 2001, “Cast iron, Div. 5–Solidification morphology of white cast iron,” Transactions of the American Foundarymen’s Society, Vol. 109, pp. 1049–1059.
Mehl, F.R., 1999, “Microstructure of cast irons,” Metals Handbook, Atlas of Microstructures of Industrial Alloys, ASTM International, 8th Edition, Vol. 7, pp. 95–99.
Morton, G., and Wingrove, J., 1969, “Constitution of bloomery slags: Part I: Roman,” Journal of The Iron and Steel Institute, Vol. 207, No. 12, pp.1556–1969.
Park, J.S., and Verhoeven, J.D., 1996, “Directional solidification of white cast iron,” Metallurgical and Materials Transactions A, Vol. 27A, No. 8, pp. 2328–2337.
Peacey, J.G., and Davenport, W.G., 1979, The Blast Furnace Theory and Practice, Pergamon Press, 1st Edition.
Radzikowska, J., and Voort, G.V., 1998, “The Basics of Cast Iron Metallography,” Modern Casting, pp. 46–48.
Smith, W.F., 1993, Structure and Properties of Engineering Alloys, McGraw-Hill Materials Science and Engineering Series, 2nd Edition, pp. 1–41, 82.
Shackelford, J.F., Alexander, W., and Park, J.S., 1994, Materials Science Engineering Handbook, CRC Press, 2nd Edition, pp. 46–49.
Tsuge, O., Kikukuchi S., and Tokuda K., 2002, “Successful iron nugget production at ITmk3 pilot plant,” 61st Ironmaking Proceedings, Nashville, Tennessee.
Weiss, N.L., 1985, SME Mineral Processing Handbook, pp. 37–8.
Zervas, T., McMullan, J.T., and Williams, B.C., 1996, “Developments in iron and steel making,” International Journal of Energy Research, Vol. 20, pp. 69–91.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Anameric, B., Kawatra, S.K. Conditions for making direct reduced iron, transition direct reduced iron and pig iron nuggets in a laboratory furnace — Temperature-time transformations. Mining, Metallurgy & Exploration 24, 41–50 (2007). https://doi.org/10.1007/BF03403357
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03403357
Key words
- Pig iron nuggets
- Direct reduced iron
- Reduction
- Carburization
- Slag separation