Abstract
Finely-ground hematitic ore, too high in silica (quartz) to be commercially viable, was treated by emulsion flotation. A three-component emulsion mixture was used at temperatures ranging from ambient (22° C) to 30° C, 40° C, 49° C, 59° C and 68° C. The optimal emulsion dosage and composition at ambient temperature were used to determine that dosage for higher-temperature flotation tests.
The crushed ore (100%, −8 mesh) was repeatedly washed with tap water, and the filtrate’s ionic content was analyzed. The separation efficiency values (a measure of the selective separation and concentration of hematite from gangue minerals) demonstrated temperature dependence, with marked increases at temperatures above ambient. The optimal separation efficiency occurred within the range from 30° C to 60° C.
The improved separation efficiencies at temperatures exceeding ambient are explained by quartz depression. This depression is attributed to:
-
the precipitation of quartz-activating cations, principally calcium and magnesium, at increasing temperature; and
-
temperature’s effect on the collector’s solubility and attachment to the aqueous hematite surface.
Similar content being viewed by others
References
Cooke, S.R.B., Iwasaki, I., and Choi, H.S., 1960, “Effect of temperature on soap flotation of iron ore,” Trans. AIME, Vol. 217, pp. 76–83.
Cooke, S.R.B., Iwasaki, I., and Choi, H.S., 1960, “Flotation characteristics of hematite, goethite and activated quartz with 18-carbon aliphatic acids and related compounds,” Trans. AIME, Vol. 217, pp. 237–244.
Davies, E., 1964, “Determination of the magnetic separation characteristics with the Davies magnetic tube,” Trans. SME-AIME, Vol. 229, pp. 211–216.
DeMunk, V.C., 1956, “Iron deposits in Montana,” Information Circular 13, Montana Bureau of Mines and Geology, pp. 41–45.
Fuerstenau, D.W., 1971, “The adsorption of surfactants at solid-water interfaces,” Chemistry of Biosurfaces, Vol. 1, M.L. Hair, ed., Marcel Dekker Inc., New York, pp. 143–175.
Houwing, R., and Salomon, C., eds., 1965, Adhesion and Adhesives, 2nd Ed., Vol. 1, Elsevier Publishing Co., New York, p. 125.
McGlashan, D.W., and Beebe, R.R., 1957, “Flotation of manganese oxides by selective flocculation,” Unpublished Manuscript, Montana School of Mines, Butte, MT.
Ofor, O., 1990, “Emulsion flotation of hematite: Optimum emulsion quantity and composition at ambient temperature,” Journal of Mining and Geology, Vol. 26, No. 2, pp. 237–242.
Peck, A.S., Raby, L.H., and Wadsworth, M.E., 1966, “An infrared study of the flotation of hematite with oleic acid and sodium oleate,” Trans. SME-AIME, Vol. 238, pp. 301–307.
Schulmann, R., Jr., and Prakash, B., 1950, “Effect of BaCl2 and other activators on soap flotation of quartz,” Trans. AIME, Vol. 187, pp. 591–600.
Schulz, N.F., 1970, “Separation efficiency,” Trans. SME-AIME, Vol. 247, pp. 81–87.
Shergold, H.L., and Mellgren, O., 1966, “Methods for recovering ultrafine mineral particles by extraction with an organic phase,” Mining Magazine, Vol. 75, p. 124.
Zipperian, C., 1960, “A study of emulsion flotation of non-magnetic taconite ore,” M.S. Thesis, Montana College of Mineral Science and Technology, p. 17.
Author information
Authors and Affiliations
Additional information
SME nonmeeting paper 91-629.
Discussion of this paper must be submitted, in duplicate, prior to Nov. 30, 1992.
Rights and permissions
About this article
Cite this article
Ofor, O. Effect of temperature on the emulsion flotation of hematite. Mining, Metallurgy & Exploration 9, 115–118 (1992). https://doi.org/10.1007/BF03402982
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03402982