Abstract
Flotation columns and their variations are increasingly replacing conventional cells in mineral-processing circuits. While the operational characteristics of columns differ from those of conventional cells, the same scale-up methodologies are being employed. This practice may be attributed to a poor understanding of the factors that control throughput. The use of tall flotation columns is frequently justified because of the need for an increased particle residence time. However, it is shown that longer particle residence times alone do not translate into increased recoveries. In this paper, throughput data from several industrial flotation-column installations is presented. Also, an attempt is made at using dimensional analysis to provide a scale-up methodology for the factors controlling column throughput.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Anon., 1965, “Flotation Column Due for Mill Tests in Canada,” Eng. Min. J., 166, pp. 76–80.
Bensley, C.N., Roberts, T., and Nicol, S.K., 1985, “Column flotation for the treatment of fine coal,” Proc. 3rd. Australian Coal Prep. Conf., Wollong, NSW, Australia, November 18–21, pp. 87–103.
Clingan, B.V., and McGregor, D.R., 1987, “Column flotation experience at Magma Copper Company,” Mineral and Metallurgical Processing, 3, pp. 121–125.
Dobby, G.S., and Finch, J.A., 1986, “Flotation column scale-up and modeling,” CIM Bull., 78, pp. 89–96.
Espinosa-Gomez, R., Johnson, N.W., Pease, J.D., and Munro, P.D., 1989, “The commissioning of the first flotation column at Mount Isa Mine Limited,” G.S. Dobby and S.R. Rao, eds., Processing of Complex Ores, Pergamon Press, Oxford, pp. 293–302.
Gahl, R., 1916, “History of the flotation process at Inspiration,” Transactions, SME, 55, pp. 576–630.
Imhof, R., 1993, “Five years of ekoflot: Pneumatic flotation on the march,” Aufbereitungs Technik, 34, pp. 263–268.
Ityokumbul, M.T., 1992a, “A new modeling approach to flotation column design,” Minerals Engineering, 5, pp. 585–593.
Ityokumbul, M.T., 1992b, “A mass transfer approach to flotation column design,” Chem. Eng. Sci., 47, pp. 3605–3612.
Ityokumbul, M.T., 1993a, “Selection of recovery zone height in flotation column design,” Chem. Eng. Process, 32, pp. 87–92.
Ityokumbul, M.T., 1993b, “Maximum gas velocity in column flotation,” Minerals Engineering, 6, pp. 1,279–1,286.
Ityokumbul, M.T., 1994, “Design and scale-up issues in column flotation,” Innovations in Mineral Processing, Y. Yalcin, ed., pp. 187–199.
Ityokumbul, M.T., Salama, A.I.A., Mikhail, M.W., and Al Taweel, A.M., 1995, “A study of axial backmixing in a 0.76-m flotation column at CANMET’s Western Research Centre,” Minerals and Metallurgical Processing, 12, pp. 126–131.
Kho, C.-J., and Sohn, H.-J., 1989, “Column flotation of talc,” Int. J. Min. Proc., 27, pp. 157–167.
Luttrell, G.H., Weber, A.T., Adel, G.T., and Yoon, R.H., 1988, “Microbubble flotation of fine coal,” Column Flotation ’88, K.V.S. Sastry, ed., SME, Littleton, CO, Chapter. 21, pp. 205–211.
Luttrel, G.H., Mankosa, M.J., and Yoon, R.H., 1993, “Design and scale-up criteria for column flotation,” Proceedings XVIII Int. Mineral Process Congress, Sydney, Australia, pp. 785–791.
MacLeod, N.A., 1941, “Bubble action in the deep flotation cell,” Eng. Min. J., 141, p. 61.
Malozemoff, and Ramsey, R.H., 1942, “Operating characteristics of mechanical flotation machines,” Eng. Min. J., 142, pp. 45–50.
Maksimov, I.I., Borkin, A.D., Yemelyanov, M.F., and Koltunova, T.Y., 1994, “Industrial application of column flotation machines in sulphide concentrate cleaning operations” A. Sutulov Memorial Volume, Vol. II, S. Castro and J. Alvarez, eds., pp. 161–167.
O’Connor, C.T., Cilliers, J.J., and Mills, P.J.T., 1994, “Prediction of large scale column flotation cell performance using pilot plant data,” A. Sutulov Memorial Volume, Vol. II, S. Castro and J. Alvarez, eds., pp. 137–147.
Ounpuu, M., and Tremblay, R., 1991, “Investigation into the effect of column height on the 1,200 mm diameter column at Matagami,” Proceedings Int. Conf. on Column Flotation, Sudbury Ontario, Canada, pp. 303–316.
Parekh, B.K., Bland, A.E., Groppo, J.G., and Yingling, J., 1990, “A parametric study of column flotation for fine coal cleaning,” Coal Prep., 8, pp. 49–60.
Reddy, P.S.R., Kumar, S.G., Bhattacharyya, K.K., Sastri, S.R.I., and Narisimhan, K.S., 1988, “Flotation column for fine coal cleaning,” Int. J. Min. Proc., 24, pp. 161–171.
Shekhirev, D.V., Filipov, L.O., and Samyguin, V.D., 1993, “Mathematical modeling the process of separation of the raw materials in the column flotation machine,” Proceedings XVIII Int. Mineral Process Congress, Sydney, Australia, pp. 1357–1362.
Simkovich, G., 1952, “Bubble Column Flotation,” B.S. Thesis, Department of Mineral Engineering, The Pennsylvania State University, University Park, PA, 19 p.
Xu, M., and Finch, J.A., 1990, “Effect of sparger surface area on bubble diameter in flotation columns,” Can. Metall. Quart., 28, pp. 1–6.
Yiannatos, J.B., Espinosa-Gomez, R., Finch, J.A., Laplante, A.R., and Dobby, G.S., 1988, “Effect of column height on flotation column performance,” Minerals and Metallurgical Processing, 4, pp. 11–14.
Ynchausti, R.A., McKay, J.D., and Foot, D.G. Jr., 1988, “Column flotation parameters — Their effects,” Column Flotation ’88, K.V.S. Sastry, ed., SME, Littleton, CO, Chap 18, pp. 157–172.
Author information
Authors and Affiliations
Additional information
SME Preprint 95–206, SME Annual Meeting, March 6–9, 1995, Denver, CO. M&MP paper 95–621. Discussion of this peer-reviewed and approved paper is invited and must be submitted, in duplicate, prior to May 31, 1996.
Rights and permissions
About this article
Cite this article
Ityokumbul, M.T. What really determines the height in column flotation?. Mining, Metallurgy & Exploration 13, 36–40 (1996). https://doi.org/10.1007/BF03402715
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03402715