References
L. D. Jaffe, E. L. Reed, and H. C. Mann: Discontinuous Crack Propagation. Trans. AIME 185, 526; Jnl. of Metals, Aug. 1949. TN No. 16.
M. Baeyertz, W. Craig, and E. S. Bumps: A Metallographic Description of Fracture in Impact Specimens of a Structural Steel. Trans. AIME, 185, 481; Jnl. of Met, Aug. 1949.
G. Irwin: Fracture Dynamics, Trans. ASM (1948) 40A, 147–166.
J. B. Cohen, A. Hurlich, and M. Jacobson: A Metallographic Etchant to Reveal Temper Brittleness in Steel. Trans. ASM. (1947), 39, 109–138.
J. R. Vilella: Metallographic Technique for Steel. Amer. Soc. for Metals, Cleveland. (1938) 40–45
F. Sauerwald, B. Schmidt, and G. Kramer: Uber den Sprodigkeits-bereich von Eisen bei Teifen Temperaturen. Ztsch. Phys. 1931. (67), 179, .
C. H. Mathewson and G. H. Edmunds: The Neumann Bands in Ferrite. Trans. AIME. (1928), 80, 311–333.
A. A. Griffith: The Phenomena of Rupture and Flow in Solids. Trans. Roy. Soc. (London) (1920) A221, 163–198.
P. Ludwik: Bestimmung der Reiss-festigkeit aus der gleichmässigen Dehnung. Ztsch. Metallkunde. (1926), 18, 269–272.
E. Orowan. Private communication.
E. Orowan: Notch Brittleness and Ductile Fracture in Metals. Trans. Inst. of Eng. and Shipbuilders in Scotland. (1946), 89, 165–204.
C. F. Tipper: Brittle Fracture in Mild-Steel Plates—II. Engineering (1948) 165, 594.
Author information
Authors and Affiliations
Additional information
Cleveland Meeting, October 1949.
TP 2682 E. Discussion of this paper (2 copies) may be sent to Transactions AIME before December 1, 1949.
Published by permission of the National Military Establishment.
Rights and permissions
About this article
Cite this article
Jaffe, L.D., Reed, E.L. & Mann, H.C. Discontinuous crack propagation—further studies. JOM 1, 683–687 (1949). https://doi.org/10.1007/BF03398920
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03398920