References
R. F. Mehl: Recrystallization. Metals Handbook (1948) p. 261. Cleveland. A.S.M.
Taira Suzuki: The Release of Energy Associated with Crystal Restoration Process in Cold-Worked Polycrystalline Copper. Science Reports of the Research Institutes, Tohoku Univ. (1949) 1, p. 55.
W. A. Wood: The Lower Limiting Crystallite Size and Internal Strains in Some Cold-Worked Metals. Proc. Royal Soc., London (1939) 172, p. 231.
W. A. Wood, G. H. Wilms, and W. A. Rachinger: Three Basic Stages in the Mechanism of Deformation of Metals at Different Temperatures and Strain Rates. Journal Inst. Metals (1951) 79, p. 159.
R. W. Cahn: Recrystallization of Single Crystals after Plastic Bending. Journal Inst. Metals (1949) 76, p. 121.
R. D. Heidenreich: Electron Transmission Through Thin Metal Sections. Bell System Technical Journal (1951) 30, p. 867.
J. N. Kellar, P. B. Hirsch, and J. S. Thorp: An X-ray Micro-Beam Examination of a Plastically Deformed Metal. Nature (1950) 165, p. 554; and personal communication from Dr. P. B. Hirsch.
P. B. Hirsch: A Study of Cold-Worked Aluminum by an X-ray Micro-Beam Technique III. The Structure of Cold-Worked Aluminum. Acta Cryst. (1952) 5, p. 172.
B. E. Warren and B. L. Averbach: The Separation of Cold-Worked Distortion and Particle Size Broadening in X-ray Patterns. Journal of Applied Physics (1952) 23, p. 497.
A. Guinier and J. Tennevin: Researches on the Polygonization of Metals. Progress in Metal Physics II (1951) p. 177. New York and London.
C. G. Dunn and F. W. Daniels: Formation and Behavior of Subboundaries in Silicon Iron Crystals. Trans. AIME (1951) 191, p. 147; Journal of Metals (February 1951).
Paul A. Beck and Hsun Hu: Annealing Textures in Rolled Face Centered Cubic Metals. Journal of Metals (January 1952), Trans. AIME, p. 83.
C. Crussard: Etude de Recuit de 1’Aluminium. Revue Metallurgie (1944) 41, p. 118.
A. Smigelskas and C. S. Barrett: Preferred Orientation in Rolled and Recrystallized Beryllium. Trans. AIME (1949) 185, p. 145; Journal of Metals (February 1949).
M. Semchyshen and G. A. Timmons: Preferred Orientation of Arc Cast Molybdenum Sheet. Journal of Metals (March 1952), Trans. AIME, p. 279.
B. F. Decker and David Harker: Relations Between Initial and Final Orientations in Rolling and Annealing of Silicon Ferrite. Journal of Applied Physics (1951) 22, p. 900.
Paul A. Beck and Philip R. Sperry: Effect of Recrystallization Texture on Grain Growth. Trans. AIME (1949) 185, p. 240; Journal of Metals (March 1949).
C. S. Smith, in discussion: The Physics of Powder Metallurgy (1951) p. 50. New York. McGraw-Hill Book Co.
Author information
Authors and Affiliations
Additional information
TN 122E. Manuscript, May 28, 1952.
Rights and permissions
About this article
Cite this article
Beck, P.A. Do Metals Recrystallize?. JOM 4, 979–980 (1952). https://doi.org/10.1007/BF03397756
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397756