Abstract
The solidification mechanism of experimental steel ingots (7x7x20 in.) was studied by thermal analysis. It was determined that solidification proceeds in wave-like fashion at rates which are determined by the carbon level, superheat, and mold thickness. The thermal cycles of the mold walls were related to the course of solidification.
Similar content being viewed by others
References
J. Chipman and C. R. Fondersmith: Rate of Solidification of Rimming Ingots. Trans. AIME (1937) 125, pp. 370–377.
B. Matuschka: The Solidification and Crystallization of Steel Ingots: The Influence of Casting Temperature and Undercooling Capacity of the Steel. Journal Iron and Steel Inst. (1931) 124, pp. 361–386.
B. Matuschka: Solidification in Open Topped and Closed Topped Ingot Molds. Journal Iron and Steel Inst. (1938) 137, No. 1, pp. 109–126.
J. W. Spretnak: Kinetics of Solidification in Killed Steel Ingots. Trans. A.S.M. (1947) 38, pp. 569–676.
L. H. Nelson: Solidification of Steel in Ingot Molds. Trans. A.S.M. (1934) 22, pp. 193–226.
V. Paschkis: Studies on Solidification of Castings. American Foundryman (December 1945) 8, pp. 26–37.
V. Paschkis: Theoretical Thermal Studies of Steel Ingot Solidification. Trans. A.S.M. (1947)38, pp. 117–147.
R. Jackson, R. Sarjant, J. Wagstaff, N. Eares, D. Hartree, and J. Ingham: Variable Heat Flow in Steel. Journal Iron and Steel Inst. (1944) 150, No. 2, pp. 211–268.
B. Matuschka: Heat Equilibrium Between Ingot and Ingot Mold Wall. Archiv. f. Das Eisenhuttenwesen (1929) 2, pp. 405–411.
H. F. Bishop, F. A. Brandt, and W. S. Pellini: Solidification of Steel from Sand and Chill Walls. Trans. Amer. Foundrymen Soc. AFS Preprint No. 51–21. (1951).
Author information
Authors and Affiliations
Additional information
Discussion on this paper, TP 3208E, may be sent, 2 copies, to AIME by April 1, 1952. Manuscript, Aug. 13, 1951. New York Meeting, February 1952.
Rights and permissions
About this article
Cite this article
Bishop, H.F., Brandt, F.A. & Pellini, W.S. Solidification Mechanism of Steel Ingots. JOM 4, 44–54 (1952). https://doi.org/10.1007/BF03397648
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397648