References
S. I. Liu, J. J. Lynch, E. J. Ripling, and G. Sachs: Low Cycle Fatigue of the Aluminum Alloy 24ST Under Direct Stress. Trans. AIME (1948) 175, pp. 469–490; Metals Technology (Feb. 1948).
S. I. Liu and G. Sachs: The Flow and Fracturing Characteristics of the Aluminum Alloy 24ST after Alternating Tension and Compression. Trans. AIME (1949) 180, pp. 193–204; Metals Technology (June 1948).
J. J. Lynch, E. J. Ripling and G. Sachs: Effect of Various Stress Histories on the Flow and Fracture Characteristics of the Aluminum Alloy 24ST. Trans. AIME (1948) 175, pp. 435–458; Metals Technology (Jan. 1948).
H. F. Moore and J. B. Kommers: An Investigation of Fatigue of Metals. Univ. Ill. Engineering Exp. Stat. Bulletin 124 (1921).
D. J. MacAdam: Effect of Cold Working on Endurance and Other Properties of Metals. Trans. ASST (1925) 8, pp. 566–572.
J. R. Townsend and Charles H. Greenall: Fatigue Studies of Non-ferrous Sheet Metals. Proc. ASTM (1929) 29, Part 2, pp. 353–370.
B. P. Haigh and T. S. Robertson: Plastic Strain in Relation to Fatigue in Mild Steel. Engineering (1931) 132, pp. 389–390.
P. Ludwik: The Behavior of Metals under Repeated Straining. V.D.I. Ztsch. (1923) 67, pp. 122–126.
P. Ludwik: The Change in Strength Properties of Metals Under Repeated Straining. Ztsch. Metallkunde (1919) II, pp. 157–168.
G. Sachs and K. Laute: What is Fatigue? V.D.I. Ztsch. (1928) 72, No. 34, p. 1188.
G. Sachs, J. D. Lubahn and L. J. Ebert: Notched Bar Tensile Test Characteristics of Heat-Treated Low Alloy Steels. Trans. ASM (1944) 33, pp. 340–395.
Author information
Authors and Affiliations
Additional information
Discussion on this paper, TP 3065E may be sent, 2 copies, to AIME by Aug. 1, 1951. Manuscript, March 28, 1949; revision, Nov. 15, 1950. Detroit Meeting, October 1951.
This investigation is one of a series of reports in a research program conducted at the Metals Research Laboratory, Case Institute of Technology, Cleveland, in cooperation with The Office of Naval Research, U. S. Navy.
Rights and permissions
About this article
Cite this article
Liu, S.I. Effects of Precompression on the Behavior of the Aluminum Alloy 24ST4 During Cyclic Direct Stressing. JOM 3, 452–456 (1951). https://doi.org/10.1007/BF03397329
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397329