Abstract
Tensile, hardness and density properties are presented for a new 18-8 stainless steel powder for the —50, —100, and —140 mesh cuts and also for a prepared blend containing 62 pet —325 mesh powder. The data were obtained for sintering temperatures of 2100° to 2350°F and for compacting pressures of 30 to 50 tons per sq in.
Similar content being viewed by others
References
John D. Dale: Stainless Steel Powder. Proc. Metal Powder Assn. (1947) III, p. 4.
G. Stern: A New Type of Stainless Powder. Proc. Metal Powder Assn. (1950) VI, p. 49.
U. S. Patent 2,384,892.
H. W. Gillett: Present Knowledge of Low-Carbon 18-8. Symposium on Evaluation Tests for Stainless Steel. Amer. Soc. for Testing Materials. Special Technical Publication 93 (1941) 41 pp.
Author information
Authors and Affiliations
Additional information
Discussion of this paper, TP 3007 E, may be sent (2 copies) to AIME by April 1, 1951. Manuscript, Oct. 17, 1950. St. Louis Meeting, February 1951.
Rights and permissions
About this article
Cite this article
Grobe, A.H., Roberts, G.A. Mechanical Properties of Stainless Steel Powder. JOM 3, 125–130 (1951). https://doi.org/10.1007/BF03397286
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397286