Abstract
The effects of pressing in the fabrication of modern powder metallurgy parts is examined through literature of historical and practical significance. A theory of pressing and its effects, consistent with experimental results, is presented. A thorough list of references is included.
Similar content being viewed by others
References
W. D. Jones: Fundamental Principles of Powder Metallurgy, Arnold, London, 1960.
R. P. Seelig: Trans. AIME, 1947, p. 506.
M. F. Burr and M. J. Donachie, Jr.: The Fall Meeting of The Metallurgical Society, 1963, submitted to Trans. ASM.
M. F. Burr: M.S. Thesis; Rensselaer Polytechnic Institute, 1961.
R. W. Heckel: Trans. Met. Soc., AIME, 1961, p. 1001.
R. P. Seelig and J. Wulff: Trans. AIME, 1946, p. 492.
W. Barlow: Nature, 1883, pp. 186–188, 205–207.
T. T. Horsfield: J. Soc. Chem. Ind., 1934, p. 107.
J. A. Brown: Senior Thesis: Dept. Met. Eng., Carnegie Institute of Technology, 1950.
R. J. MacDonald: Senior Thesis; Dept. Met. Eng., Carnegie Institute of Technology, 1951.
W. D. Jones: Principles of Powder Metallurgy; Arnold, London, 1937.
E. Pelzel: Z. f. Metallk., 1955, p. 813.
E. E. Walker: Trans. Faraday Soc., 1923–24, p. 73.
M. Yu. Bal’shin: Vestnik Metalloprom, 1938, p. 124.
M. Yu. Bal’shin: Poroshkovoye Metallovedenie; Moscow, 1948.
M. Yu. Bal’shin. Pulvermetallurgie; Wilhelm Knapp, Halle, 1954.
L. F. Athy: Bull. Am. Assn. Petrol. Geologists, 1930, p. 1.
I. Shapiro: Ph. D. Thesis, Univ. of Minnesota, 1944.
C. Torre: Berg.u. Huttenmannische Monatshefte, 1948, p. 62.
K. Konopicky: as quoted in Refs. 1 and 5.
R. W. Heckel: Proc. Metal Powder Assn., Metal Powder Industries Federation, N. Y., 1961, p. 66.
R. W. Heckel: Trans. Met. Soc. AIME, 1961, p. 671.
R. W. Heckel: Trans. Met. Soc. AIME, 1962, p. 1073.
E. Voce: as quoted in Ref. 1.
C. Balhausen: Archiv. f. d. Eisen., 1955, p. 185.
G. B. Smith: Proc. Metal Powder Assn., 1948, p. 29.
M. Yu. Bal’shin: Vestnik Metalloprom., 1936, p. 87.
F. Sauerwald: Z. f. Metallk., 1924, p. 41.
F. Sauerwald: Z. f. Metallk., 1928, p. 227.
F. Sauerwald: Metallwirstschaft, 1941, p. 649.
C. G. Goetzel: Treatise on Powder Metallurgy, vol. 2; Interscience, N. Y., 1950, p. 813.
R. J. Sharan, D. S. Eppelsheimer, and D. Swarup: Eastern Metals Review, Feb. 6, 1961, p. 113.
E. Wretblad and J. Wullf: Powder Metallurgy; ASM, Cleveland, 1942, p. 36.
J. Heuberger: Discussion of A. Smekal; Proc. Intnl. Powder. Met. Conf., Graz, 1948.
F. N. Rhines: Trans. AIME, 1947, p. 506.
M. F. Burr and M. J. Donachie, Jr.: to be published.
J. J. Early and F. V. Lenel: private communication.
J. Wullf, ed.: Powder Metallurgy; ASM, Cleveland, 1942.
Proc. Metal Powder Assn., 1945–61.
H. H. Hausner and I. Sheinhartz: Proc. Metal Powder Assn., 1954, p. 6.
Iron Powder Handbook; Hoganas Co., Sweden, 1959.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Donachie, M.J., Burr, M.F. Effects of Pressing on Metal Powders. JOM 15, 849–854 (1963). https://doi.org/10.1007/BF03397262
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397262