Abstract
The chief limitation in using beryllium as a structural material—brittleness—is analyzed on the basis of the preferred orientation of slip planes of single crystals. Solutions to overcome beryllium’s lack of ductility–alloying, texture and grain size control, and obtaining high-purity metal—are described and evaluated. Fabrication methods are listed and evaluated with specific regard to the brittleness problem of beryllium.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
R. A. Crawford, A. B. Burns, and L. A. Riedinger: Strength Efficiency and Design for Beryllium Structures; Report No. ASD TR-61-692.
H. T. Lee and R. M. Brick: Trans. ASM, vol. 48, p. 1003.
G. L. Tuer and A. R. Kaufmann: Ductility of Beryllium as Related to Single Crystal Deformation and Fracture; The Metal Beryllium, ASM, Cleveland, Ohio, 1955, p. 372.
P. Bastien and P. Pointu: Determination of the Slip Elements in Hexagonal Metals by the Asterism in Laue Photographs and Application to a Study of Beryllium Deformation at High Temperature; J. Nuclear Materials, vol. 5, p. 101.
A. K. Wolff, L. R. Aronin, and S. H. Gelles: Aging and Strain Aging in Beryllium; Technical Document Report No. ASD-TRD-62- 509, vol. 2, sec. 11.
J. Greenspan, G. Henrikson, and A. R. Kaufmann: Beryllium Research and Development in the Area of Composite Materials; WADD Technical Report 60–32, Nuclear Metals Inc., Apr. 1960.
F. M. Yans: Third Dimensional Ductility and Crack Propagation in Beryllium Sheet; NMI-1212, Mar. 18, 1959.
A. N. Stroh: A Theory of the Fracture of Metals; Advances in Physics, vol. 6, p. 418.
V. G. Macres: The Interdependence of Particle Size, Microstructure, and Orientation of the Ductility of Beryllium Rod and Sheet; Thesis, SM M.I.T., 1954.
W. W. Beaver and K. G. Wikle: Mechanical Properties of Beryllium Fabricated by Powder Metallurgy; Trans. AIME, vol. 200, p. 559.
J. G. Klein, L. M. Pereleman, and W. W. Beaver: Development of Wrought Beryllium Alloys of Improved Properties; WADC Technical Report 58–478, Part 1, Feb. 1959.
J. Greenspan: Ductility in Beryllium Related to Grain Orientation and Grain Size; Trans. AIME, vol. 215, p. 153.
M. Herman and J. E. Spangler: The Flow and Fracture Characteristic of Zone Melted Beryllium; Paper No. 40, International Conf. on the Metallurgy of Beryllium, London, Oct. 16–18, 1961.
E. D. Levine: personal communication, Aug. 1962.
F. A. Crossley and R. J. VanThyne: Ductile Beryllium Composites by Liquid Phase Sintering; Paper No. 23, International Conf. on the Metallurgy of Beryllium, London, Oct. 16–18, 1961.
B. M. MacPherson, R. B. Magalaski, and R. G. O’Rourke: The Brazing of Beryllium; Sec. 7, Beryllium Research and Development Program, Technical Document Report No. ASD-TDR-62-509, vol. 2.
L. R. Riedinger: Beryllium as a Structural Material for Air Craft, Missiles, and Space Craft; Paper No. 50, International Conf. on the Metallurgy of Beryllium, London, Oct. 16–18, 1961.
I. Perlmutter: Metallurgical Considerations in the Application of Beryllium for Airborne Structures; Paper No. 67, International Conf. on the Metallurgy of Beryllium, London, Oct. 16–18, 1961.
J. N. Krusos, et al: Beryllium Composite Structures; vol. 1, Design and Application, Technical Report No. ASD-TR-61-706, May 1962.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gelles, S., Nerses, V. & Siergiej, J.M. Beryllium as a Structural Material. JOM 15, 843–848 (1963). https://doi.org/10.1007/BF03397261
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03397261