References
M. Gombert and J. de Hedouville: Production results obtained in converters with cylindrical profile, shallow bath depth, and large diameter bottom. Paper read at the Congress of the Centennial Anniversary of the Société de l’Industrie Minérale, Paris, June 23, 1955; to be published.
P. Leroy, M. Gombert, B. Trentini: Methodical investigation, using the volume-debitgraphe, of the factors governing the blow-ability of the Thomas (basic Bessemer) converter charges, Fall Meeting 1952, Société francaise de Métallurgie; Revue de Metallurgie, June 1953, vol. 50, No. 6, pp. 433-444; July 1953, No. 7, pp. 500-520; August 1953, No. 8, pp. 579-595; September 1953, No. 9, pp. 642-664.
R. Michaux and P. Leroy: Adaption of the volume-debitgraphe for use on the basic Bessemer converter blown with oxygen-enriched air. Fall Meeting 1952, S.F.M., Revue de Métallurgie, March 1953, vol. 50, No. 3, pp. 215-228.
B. Trentini, P. Leroy, and M. Gombert: Influence of the temperature evolution, during the refining process, on the nitrogen content of Thomas steel (basic Bessemer); Revue de Métallurgie, May 1955, vol. 52, No. 5, pp. 418–427.
P. Rodieq and G. Maillot: The two-color pyrometer; Revue de Métallurgie, June 1955, vol. 52, No. 6, pp. 447–484.
J. Galey, P. Leroy, and M. Denis: Measurements and recording of the true temperature of the converter flame, Revue de Métallurgie, November 1954, vol. 51, No. 11, pp. 806–808.
H. K. Work: Photocell Control for Bessemer Steelmaking, Trans. AIME, 1941, vol. 145, pp. 132–150.
J. Galey, P. Leroy, and M. Denis: End-point signal of the basic Bessemer operation, paper read at the Fall Meeting, S.F.M., Oct. 21, 1953; Revue de Métallurgie, November 1954, vol. 51, No. 11, pp. 795-809.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Leroy, P. New Control Instruments for Bessemer Steelmaking. JOM 8, 764–768 (1956). https://doi.org/10.1007/BF03377764
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03377764