Abstract
The yield strength of annealed tungsten was found to have a strain rate exponent 12 times as great as that of low carbon steel. The effects of temperature and strain rate could be correlated through the Zener-Hollomon parameter with a heat of activation as-sociated with yielding of 32,000 cai per g-atom. This heat of activation is independent of strain although both the temperature and strain rate dependence of the yield strength vary with strain.
Similar content being viewed by others
References
C. Zener and J. H. Hollomon: Journal of Applied Physics (1944) 15, pp. 22–32.
J. H. Bechtold: Trans. AIME (1953) 197, pp. 1469–1475; Journal of Metals (November 1953).
J. H. Bechtold and P. G. Shewmon: Trans. ASM (1954) 46, p. 397
R. L. Smith, G. Spangler, and R. M. Brick: Trans. ASM (1954) 46, p. 973.
A. Nadai and M. J. Manjoine: Journal of Applied Mechanics (1941) 63, pp. 77–91.
D. Sherby, R. L. Orr, and J. E. Dorn: Trans. AIME (1954) 200, p. 71; Journal of Metals (January 1954).
F. R. N. Nabarro: Report on Strength of Solids. (1948) London. Physical Soc.
J. H. Bechtold: Tensile Properties of Tantalum at Low Temperatures. Acta Metallurgica (1955) 3, p. 249.
Author information
Authors and Affiliations
Additional information
Discussion of this paper, TP 4064E, may be sent, 2 copies, to AIME by Apr. 1, 1956. Manuscript, Jan. 12, 1955. Philadelphie Meeting, October 1955.
Rights and permissions
About this article
Cite this article
Bechtold, J.H. Strain Rate Effects in Tungsten. JOM 8, 142–146 (1956). https://doi.org/10.1007/BF03377659
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03377659