References
Pearson, C.E.; J. Inst. Metals, 1934, Vol. 54, p. 111.
Backofen, W.A., Turner, I.R., and Avery, D.H.; Trans. ASM, 1964, Vol. 57, p. 980.
Alden, T.H., and Schadler, H.W.; Trans. Met. Soc. 1968, Vol. 242, p. 825.
Holt, D.L; Trans. Met. Soc. AIME, 1968, Vol. 242, p. 25.
Cook, R.C., and Risebrough, N.R.; Scripts Met., 1968, Vol. 2, p. 487.
Holt, D.L, and Backofen, W.A.; Trans. ASM, 1966, Vol. 59, p. 765.
Zehr, S.W., and Backofen, W.A.; Trans. ASM, 1968, Vol. 61, p. 300.
Cline, H.E., and Alden, T.H.; Trans. Met. Soc. AIME, 1967, Vol. 239, p. 710.
Avery, D.H., and Backofen, W.A.; Trans. ASM, 1965, Vol. 58, p. 551.
Lee, D., and Backofen, W.A.; Trans. Met. Soc. AIME, 1967, Vol. 239, p. 1034.
Hayden, H.W., Gibson, R.C., Merrick, H.F., and Brophy, J.H.; Trans. ASM, 1967, Vol. 60, p. 3.
Garfinkle, M., Witzke, W.R., and Klopp, W.D.; Trans. Met. Soc. AIME, 1969, Vol. 245, p. 303.
Karim, A., and Backofen, W.A.; Mater. Sci. Eng., 1968, Vol. 3, p. 306.
Lee, D.; Acta Met., 1969, Vol. 17, p. 1057.
Al-Naib, T.Y.M., and Duncan, J.L.; Int. J. Mech. Sci., 1970, Vol. 12, p. 463.
Nazirl, H., and Pearce, R.; Int. J. Mech. Sci., 1970, Vol. 12, p. 513.
Stephens, J.R., and Klopp, E.D.; NASA Technical Note, 1968.
McLean, D.; Trans. Met. Soc. AIME, 1968, Vol. 242, p. 1193.
Christian, J.W.; Acta Met, 1964, Vol. 12, p. 99.
Krausz, A.S.; Acta Met., 1968, Vol. 16, p. 897.
Krausz, A.S.; Mater. Sci. Eng., 1970, Vol. 6, p. 260.
Cagle, Wm. F., Jr., and Eyring, H.; J. App. Phys., 1951, Vol. 22, p. 771.
Eyring, H. (private communication).
Krausz, A.S.; Trans. CSME, EIC, 1971, Vol. 14, p. 1.
Conrad, H.; Journal of Metals, 1964, Vol. 16, p. 582.
Krausz, A.S.; Mater. Sci. Eng., 1969, Vol. 4, p. 193.
Ghosh, A., and Duncan, J.L.; Int. J. Mech. Sci., 1970, Vol. 12, p. 499
Holt, D.L.; Int. J. Mech. Sci., 1970, Vol. 12, p. 491.
Cornfield, G.C., and Johnson, R.H.; Int. J. Mech. Sci., 1970, Vol. 12, p. 479.
Author information
Authors and Affiliations
Additional information
Alex S. Krausz received his B.Sc from the Technical University, Hungary (mechanical engineering), his M. Sc. from Queen’s University, Kingston, Ontario, Canada (mechanical engineering) and his PhD from the University of Toronto, (metallurgy). He is presently professor and chairman of the Dept, of Mechanical Engineering, University of Ottawa, Ottawa, Ontario, Canada. His research activity is concentrated on the study of metal forming processes and thermally activated plastic flow.
Rights and permissions
About this article
Cite this article
Krausz, A.S. The forming of superplastic alloys. JOM 25, 24–26 (1973). https://doi.org/10.1007/BF03355943
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03355943